Sintering effect on mechanical properties of composites of bovine hydroxyapatite (BHA) – 5% (Al2O3 – TİO2)
Öz
Hydroxyapatite (HA) use in biomedicine one as one of the promising biomaterials. Apatite-based ceramics, derived from fine powder of calcinated bovine-bone (BHA), were successfully reinforced with some materials like titanium, zirconia, lithium oxide, bio inert glass and yttria which contained biocompatible elements, via sintering at different temperatures. In this study, hydroxyapatite (HA) material, obtained from calcinated bovine bone (BHA), was mixed with 5 wt.% Al2O3-TiO2. In the Al2O3-TiO2 compound, according to rate of the 3 wt.%, 8, 13, 20 and 40 for TiO2 has been changed. The pressed samples were sintered at various sintering temperatures between 1000°C and 1300°C. Measurements of compression strength, micro hardness, and density, and SEM observation were performed. Experimental results showed that the samples with 13 wt.% TiO2 reached a maximum of densification and the highest values of mechanical properties were achieved after sintering at 1300°C.
Anahtar Kelimeler
Sintering effect on mechanical properties of composites of bovine hydroxyapatite (BHA) – 5% (Al2O3 – TİO2)
Öz
Hydroxyapatite (HA) use in biomedicine one as one of the promising biomaterials. Apatite-based ceramics, derived from fine powder of calcinated bovine-bone (BHA), were successfully reinforced with some materials like titanium, zirconia, lithium oxide, bio inert glass and yttria which contained biocompatible elements, via sintering at different temperatures. In this study, hydroxyapatite (HA) material, obtained from calcinated bovine bone (BHA), was mixed with 5 wt.% Al2O3-TiO2. In the Al2O3-TiO2 compound, according to rate of the 3 wt.%, 8, 13, 20 and 40 for TiO2 has been changed. The pressed samples were sintered at various sintering temperatures between 1000°C and 1300°C. Measurements of compression strength, micro hardness, and density, and SEM observation were performed. Experimental results showed that the samples with 13 wt.% TiO2 reached a maximum of densification and the highest values of mechanical properties were achieved after sintering at 1300°C.
Anahtar Kelimeler
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 1 Haziran 2012 |
| Yayımlandığı Sayı | Yıl 2012 Cilt: 1 Sayı: 1 |