Öz
In the present paper walnut particle reinforced composite was developed in an open mould. Walnut particle reinforced composite was prepared with epoxy matrix with 10-40 weight percentage (wt%) of walnut particles and the effect of the reinforcement of particles on the water absorption capacity and compressive strength have been evaluated. The water absorption capacity was found to increase with increasing percentage of walnut shell particle. Ultimate compressive strength and Percentage reduction in length in compression increases with increment of walnut particle wt% remarkably. There was a major increase in ultimate compressive strength between 20 to 30 wt% of walnut shell particle with the maximum value of 50 MPa at 30 wt% of walnut particles. This study hence exploits the potential of walnut particle to be used in natural particle based composites.
Anahtar Kelimeler
Kaynakça
- Bolton J. The potential of plant fibres as crops for industrial use. Outlook on Agriculture, 1995; 24: 85.
- Risby MS, Risby SV, Wong AMS, Hamada AR, Khairul and Elasdig M. Ballistic performance of coconut shell powder/twaron fabric against non-armour piercing projectiles. Defence Science Journal, 2008; 58:248 – 263.
- Apasi A, Madakson PB, Yawas DS and Aigbodion VS. Wear behaviour of Al-Si-Fe Alloy/Coconut shell ash particulate composites. Tribology in Industry, 201; 34(1): 36 – 43. Sapuan SM, Zan MNM, Zainudin ES, and Arora PR. Tensile and flexural strengths of coconut spathe fibre reinforced composites. Journal of Tropical Agriculture, 2005; 43: 63 – 65.
- Pradhan SK and Dwarkadas ES. Processing and characterization of UHMWPECSP (coconut shell powder) composite. Powder Composite, 2006; 3: 32 – 34. Cheila G, Mothe E, Iara C and De M. Characterization of sugar cane and coconut fibers by thermal analysis and FTIR. Journal of Thermal Analysis and Calorimetry, 2009; 97: 661.
- Andrzej K, Abdullah AM and Volk J. Barley husk and coconut shell reinforced polypropylene composites: The effect of fibre physical, chemical and surface properties. Composites Science and Technology, 2010; 70(5): 840 – 846.
- Misra A and Singh VK. Experimental analysis of two dimensional photoelastic properties used in fracture mechanic. Journal of IEI, 2010; 91: 21 – 24.
- Singh VK and Gope PC. Silica-styrene-butadiene rubber filled hybrid composites: experimental characterization and modeling. Journal of Reinforced Plastics and Composites, 2010; 29(16): 2450 – 2468.
Öz
In the present paper walnut particle reinforced composite was developed in an open mould. Walnut particle reinforced composite was prepared with epoxy matrix with 10-40 weight percentage (wt%) of walnut particles and the effect of the reinforcement of particles on the water absorption capacity and compressive strength have been evaluated. The water absorption capacity was found to increase with increasing percentage of walnut shell particle. Ultimate compressive strength and Percentage reduction in length in compression increases with increment of walnut particle wt% remarkably. There was a major increase in ultimate compressive strength between 20 to 30 wt% of walnut shell particle with the maximum value of 50 MPa at 30 wt% of walnut particles. This study hence exploits the potential of walnut particle to be used in natural particle based composites.
Anahtar Kelimeler
Kaynakça
- Bolton J. The potential of plant fibres as crops for industrial use. Outlook on Agriculture, 1995; 24: 85.
- Risby MS, Risby SV, Wong AMS, Hamada AR, Khairul and Elasdig M. Ballistic performance of coconut shell powder/twaron fabric against non-armour piercing projectiles. Defence Science Journal, 2008; 58:248 – 263.
- Apasi A, Madakson PB, Yawas DS and Aigbodion VS. Wear behaviour of Al-Si-Fe Alloy/Coconut shell ash particulate composites. Tribology in Industry, 201; 34(1): 36 – 43. Sapuan SM, Zan MNM, Zainudin ES, and Arora PR. Tensile and flexural strengths of coconut spathe fibre reinforced composites. Journal of Tropical Agriculture, 2005; 43: 63 – 65.
- Pradhan SK and Dwarkadas ES. Processing and characterization of UHMWPECSP (coconut shell powder) composite. Powder Composite, 2006; 3: 32 – 34. Cheila G, Mothe E, Iara C and De M. Characterization of sugar cane and coconut fibers by thermal analysis and FTIR. Journal of Thermal Analysis and Calorimetry, 2009; 97: 661.
- Andrzej K, Abdullah AM and Volk J. Barley husk and coconut shell reinforced polypropylene composites: The effect of fibre physical, chemical and surface properties. Composites Science and Technology, 2010; 70(5): 840 – 846.
- Misra A and Singh VK. Experimental analysis of two dimensional photoelastic properties used in fracture mechanic. Journal of IEI, 2010; 91: 21 – 24.
- Singh VK and Gope PC. Silica-styrene-butadiene rubber filled hybrid composites: experimental characterization and modeling. Journal of Reinforced Plastics and Composites, 2010; 29(16): 2450 – 2468.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 1 Haziran 2013 |
| Yayımlandığı Sayı | Yıl 2013 Cilt: 2 Sayı: 1 |