Ofis-İçi Şeffaf Plak Üretimi

Öz

Ofis içi şeffaf plak üretimi, ortodontik tedaviye devrim niteliğinde bir yaklaşım sunarak ortodonti alanında hızla dönüşüm sağlamaktadır. Bu derleme, üretim sürecini ve süreçte yer alan ana adımları ele alarak, üç boyutlu(3B) tedavi planlaması, üç boyutlu baskı ve baskı sonrası işlemler üzerinde durmaktadır. Şeffaf plakların doğrudan basımı da önemli bir üretim teknolojisi ilerlemesi olarak incelenmektedir. Ofis içi şeffaf plak üretimi, gelişmiş hasta memnuniyeti, diş hekimleri için daha fazla kontrol ve maliyet tasarrufu gibi pek çok avantaj sunmaktadır. Şeffaf ve neredeyse görünmez bir tedavi seçeneği olarak şeffaf plaklar, ortodontik tedavi olmak isteyen hastalar arasında önemli bir ilgi görmektedir. Bu plaklar, düzgün ağız hijyenini ve sınırsız gıda seçimine izin vererek, cazibelerini daha da artırmaktadır. Plak tedavisi, geleneksel diş tellerine kıyasla daha az rahatsızlık ve daha kısa randevu süreleri ile ilişkilendirildiğinden, ortodonti pratiğinde popülaritesi ve etkisi giderek artmaktadır. Plakların doğrudan basımı, diş hekimlerinin 3B baskı teknolojisi kullanarak plakları ofislerinde üretmelerine olanak tanıyarak daha da büyük verimlilik ve kişiselleştirme potansiyeli sunmaktadır. Bu yöntem, birden fazla adımı ortadan kaldırır ve dış laboratuvarlara olan bağımlılığı azaltarak süreci basitleştirir ve tedaviyi hızlandırır. Sonuç olarak, özellikle doğrudan basım yoluyla ofis-içi şeffaf plak üretimi, ortodontik bakımı devrim niteliğinde dönüştürme potansiyeline sahiptir. Üretim sürecini basitleştirerek ve daha rahat, estetik bir tedavi seçeneği sunarak, bu yenilikçi yaklaşımın diş hekimliği topluluğu içinde giderek daha fazla ilgi görmesi ve hastaların deneyimini dönüştürmesi muhtemeldir.

Anahtar Kelimeler

• Şeffaf plak
• 3B baskı
• tedavi planlama yazılımı
• şeffaf plak malzemeleri

In-Office Aligner Fabrication

Öz

In-office aligner fabrication is rapidly transforming the orthodontic landscape, offering a revolutionary approach to orthodontic treatment. This review discusses the fabrication process, focusing on the key steps involved: three-dimensional(3D) treatment planning, threedimensional( 3D) printing, and post-processing. The direct printing of clear aligners is also explored, as it presents a significant advancement in aligner production technology. In-office production of clear aligners presents numerous advantages, including enhanced patient satisfaction, greater control for dental practitioners, and cost savings. As a discreet and virtually invisible treatment option, clear aligners have garnered significant interest among patients seeking orthodontic care. These aligners permit proper oral hygiene and unrestricted food choices, further increasing their appeal. Aligner therapy is generally associated with less discomfort and reduced chair time in comparison to traditional braces, contributing to its growing popularity and impact on the orthodontic industry. Direct printing of aligners offers the potential for even greater efficiency and customization, as it enables dental professionals to fabricate the aligners in-office using 3D printing technology. This approach eliminates the need for multiple steps and reduces reliance on external labs, streamlining the process and accelerating treatment. In conclusion, in-office aligner fabrication, particularly through direct printing, is poised to revolutionize orthodontic care. By streamlining the production process and offering a more comfortable, discreet treatment option, this innovative approach is likely to continue gaining traction within the dental community and transform the patient’s experience.

Anahtar Kelimeler

• Clear aligner
• 3D printing
• Treatmentplanning software
• Aligner materials

Kaynakça

1. 1. Allareddy V, Nalliah R, Lee MK, Rampa S, Allareddy V. Adverse clinical events reported during Invisalign treatment: Analysis of the MAUDE database. American Journal of Orthodontics and Dentofacial Orthopedics. 2017 Nov 1;152(5):706–10.
2. 2. Kesling HD. The philosophy of the tooth positioning appliance. Am J Orthod Oral Surg. 1945;31(6):297–304.
3. 3. Rajasekaran A, Chaudhari PK. Integrated manufacturing of direct 3D-printed clear aligners. Front Dent Med. 2023;3:1089627.
4. 4. Shannon T, Groth C. Be your own manufacturer: 3D printing intraoral appliances. Semin Orthod. 2021 Sep 1;27(3):184–8.
5. 5. Tartaglia GM, Mapelli A, Maspero C, Santaniello T, Serafin M, Farronato M, et al. Direct 3D printing of clear orthodontic aligners: Current state and future possibilities. Vol. 14, Materials. MDPI AG; 2021.
6. 6. Shah MJ, Kubavat AK, Patel KV, Prajapati NH. Fabrication of in-house aligner- A review. Journal of Contemporary Orthodontics. 2022 Sep 28;6(3):120–4.
7. 7. Bichu YM, Alwafi A, Liu X, Andrews J, Ludwig B, Bichu AY, et al. Advances in orthodontic clear aligner materials. Bioact Mater. 2023 Apr 1;22:384–403.
8. 8. Wu E. The application of in-office aligners in the combination treatment protocol. Semin Orthod. 2022 Jun 1;28(2):85–91.

9. 9. Jedliński M, Mazur M, Grocholewicz K, Janiszewska-Olszowska J. 3D Scanners in Orthodontics-Current Knowledge and Future Perspectives-A Systematic Review. Int J Environ Res Public Health. 2021 Jan 27;18(3):1121. doi: 10.3390/ijerph18031121. PMID: 33513981; PMCID: PMC7908072.
10. 10. Christopoulou I, Kaklamanos EG, Makrygiannakis MA, Bitsanis I, Perlea P, Tsolakis AI. Intraoral Scanners in Orthodontics: A Critical Review. Vol. 19, International Journal of Environmental Research and Public Health. MDPI; 2022.
11. 11. Nulty AB. A comparison of full arch trueness and precision of nine intra-oral digital scanners and four lab digital scanners. Dent J (Basel). 2021 Jul 1;9(7).
12. 12. Xu X, Awad A, Robles-Martinez P, Gaisford S, Goyanes A, Basit AW. Vat photopolymerization 3D printing for advanced drug delivery and medical device applications. Vol. 329, Journal of Controlled Release. Elsevier B.V.; 2021. p. 743–57.
13. 13. Rouzé l’Alzit F, Cade R, Naveau A, Babilotte J, Meglioli M, Catros S. Accuracy of commercial 3D printers for the fabrication of surgical guides in dental implantology. J Dent. 2022 Feb 1;117.
14. 14. Lin L, Fang YZ, Liao Y, Chen G, Gao C, Zhu P. 3D Printing and Digital Processing Techniques in Dentistry: A Review of Literature. Adv Eng Mater. 2019;21 (6, article 1801013)
15. 15. Quan H, Zhang T, Xu H, Luo S, Nie J, Zhu X. Photo-curing 3D printing technique and its challenges. Bioact Mater. 2020;5(1):110-115.
16. 16. Shan W, Chen Y, Hu M, Qin S, Liu P. 4D printing of shape memory polymer via liquid crystal display (LCD) stereolithographic 3D printing. Mater Res Express. 2020 Oct 1;7(10).
17. 17. Lo Giudice A, Ronsivalle V, Rustico L, Aboulazm K, Isola G, Palazzo G. Evaluation of the accuracy of orthodontic models prototyped with entry-level LCD-based 3D printers: a study using surface-based superimposition and deviation analysis. Clin Oral Investig. 2022 Jan 1;26(1):303–12.
18. 18. Shah MJ, Kubavat AK, Patel KV, Prajapati NH. Fabrication of in-house aligner- A review. Journal of Contemporary Orthodontics. 2022 Sep 28;6(3):120–4.
19. 19. Kohda N, Iijima M, Muguruma T, Brantley WA, Ahluwalia KS, Mizoguchi I. Effects of mechanical properties of thermoplastic materials on the initial force of thermoplastic appliances. Angle Orthodontist. 2013 May;83(3):476–83.
20. 20. Kaur H, Khurelbaatar T, Mah J, Heo G, Major PW, Romanyk DL. Investigating the role of aligner material and tooth position on orthodontic aligner biomechanics. J Biomed Mater Res B Appl Biomater. 2023 Jan 1;111(1):194–202.
21. 21. Ryu JH, Kwon JS, Jiang HB, Cha JY, Kim KM. Effects of thermoforming on the physical and mechanical properties of thermoplastic materials for transparent orthodontic aligners. Korean J Orthod. 2018 Sep 1;48(5):316–25.
22. 22. Bucci R, Rongo R, Levatè C, Michelotti A, Barone S, Razionale AV, et al. Thickness of orthodontic clear aligners after thermoforming and after 10 days of intraoral exposure: a prospective clinical study. Prog Orthod. 2019 Dec 1;20(1).
23. 23. Koenig N, Choi JY, McCray J, Hayes A, Schneider P, Kim KB. Comparison of dimensional accuracy between direct-printed and thermoformed aligners. Korean J Orthod. 2022 Jul 1;52(4):249–57.
24. 24. Lee SY, Kim H, Kim HJ, Chung CJ, Choi YJ, Kim SJ, et al. Thermo-mechanical properties of 3D printed photocurable shape memory resin for clear aligners. Sci Rep. 2022 Dec 1;12(1).
25. 25. Park SY, Choi SH, Yu HS, Kim SJ, Hee K, Kim H, et al. Comparison of thickness, gap width and translucency for 3D-printed and thermoformed clear aligners: A micro-CT analysis. 2023; Available from: https://doi.org/10.21203/rs.3.rs-2512327/v1
26. 26. Lambart AL, Xepapadeas AB, Koos B, Li P, Spintzyk S. Rinsing postprocessing procedure of a 3D-printed orthodontic appliance material: Impact of alternative postrinsing solutions on the roughness, flexural strength and cytotoxicity. Dental Materials. 2022 Aug 1;38(8):1344–53.