Konferans Bildirisi
BibTex RIS Kaynak Göster

REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION

Yıl 2020, Cilt: 2 Sayı: 2, 51 - 60, 25.12.2020

Öz

Furniture design classes in interior design programs mostly lack on production knowledge. Although the knowledge in this area is provided theoretically, tactile knowledge cannot be transferred neither oral nor verbally. At the other hand, furniture industry is the place where this kind of knowledge is utilized continuously. In the global World, the industry must catch up with new trends that are part of the endeavors in design in Universities. Problems due to the nature of industry and design problems of students and teachers meet at furniture itself but industry and University are still not close enough.
In this paper, possible collaborations between industry and University are discussed. The furniture design class which is held in an interior design department is organized at the scope of industry-university collaboration. In this sense, the director of a mid-sized furniture firm is invited as a tutor for one semester. The subject of the class is determined as a typical problem from industry, reuse of residual materials of production. These materials are converted into design artifacts. The output of this study is discussed in this paper. This discussion includes evaluation of the collaboration through qualitative and quantitative data of student reports, surveys, and partner interpretations.

Kaynakça

  • Ankrah, S. and Al-Tabbaa O. (2015). Universities—industry collaboration: A systematic review, Scandinavian Journal of Management, 31. 387-408
  • Odabasi A., Helvacioglu S., Insel M., Helvacioglu I.H. (2010) Üniversite Sanayi İşbirliğinde Bir Model”, Gemi ve Deniz Teknolojisi, 18. 20-25
  • Alfonso, A., Ramirez J. J., Diaz-Puente J. M. (2012). University- industry cooperation in the education domain to foster competitiveness and employment, Procedia - Social and Behavioral Sciences, 46. 3947-3953
  • Yetis, Ü. B. 2(016). Sektörel Atık Kılavuzları: Ağaç, Ağaç Ürünleri ve Mobilya İmalatı, Çevre ve Şehircilik Bakanlığı, Ankara, 21
Yıl 2020, Cilt: 2 Sayı: 2, 51 - 60, 25.12.2020

Öz

Kaynakça

  • Ankrah, S. and Al-Tabbaa O. (2015). Universities—industry collaboration: A systematic review, Scandinavian Journal of Management, 31. 387-408
  • Odabasi A., Helvacioglu S., Insel M., Helvacioglu I.H. (2010) Üniversite Sanayi İşbirliğinde Bir Model”, Gemi ve Deniz Teknolojisi, 18. 20-25
  • Alfonso, A., Ramirez J. J., Diaz-Puente J. M. (2012). University- industry cooperation in the education domain to foster competitiveness and employment, Procedia - Social and Behavioral Sciences, 46. 3947-3953
  • Yetis, Ü. B. 2(016). Sektörel Atık Kılavuzları: Ağaç, Ağaç Ürünleri ve Mobilya İmalatı, Çevre ve Şehircilik Bakanlığı, Ankara, 21
Toplam 4 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Kereste, Hamur ve Kağıt
Bölüm Research Articles
Yazarlar

Mehmet Ali Altın 0000-0001-8992-7088

Yayımlanma Tarihi 25 Aralık 2020
Kabul Tarihi 3 Aralık 2020
Yayımlandığı Sayı Yıl 2020 Cilt: 2 Sayı: 2

Kaynak Göster

APA Altın, M. A. (2020). REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION. Wood Industry and Engineering, 2(2), 51-60.
AMA Altın MA. REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION. WI&E. Aralık 2020;2(2):51-60.
Chicago Altın, Mehmet Ali. “REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION”. Wood Industry and Engineering 2, sy. 2 (Aralık 2020): 51-60.
EndNote Altın MA (01 Aralık 2020) REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION. Wood Industry and Engineering 2 2 51–60.
IEEE M. A. Altın, “REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION”, WI&E, c. 2, sy. 2, ss. 51–60, 2020.
ISNAD Altın, Mehmet Ali. “REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION”. Wood Industry and Engineering 2/2 (Aralık 2020), 51-60.
JAMA Altın MA. REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION. WI&E. 2020;2:51–60.
MLA Altın, Mehmet Ali. “REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION”. Wood Industry and Engineering, c. 2, sy. 2, 2020, ss. 51-60.
Vancouver Altın MA. REUSING RESIDUAL MATERIAL OF FURNITURE PRODUCTION IN DESIGN ARTIFACTS BY UNIVERSITY-INDUSTRY COLLABORATION. WI&E. 2020;2(2):51-60.

Wood Industry and Engineering Journal
 Correspondence: Karadeniz Technical University, Faculty of Forestry, Department of Forest Industry Engineering, Kanuni Campus, 61080, Trabzon / TURKEY
Contact E-mail: engin_gezer@yahoo.com (Editor - Assoc. Prof. Dr. Engin Derya GEZER),   iaydin@ktu.edu.tr  (Co-Editor - Prof. Dr. Ismail AYDIN)
Phone: +90 (462) 377 1532,  Fax: +90 (462) 325 7499