Tesis Yönetiminde BIM Entegrasyonunun Enerji Analizi ve Proaktif Bakıma Etkileri

Yıl 2022, , 23 - 30, 15.08.2022

Özgür Telliel

https://doi.org/10.53033/ybm.1124383

Cited By: 1

Öz

Bir tesisin yaşam döngüsündeki maliyetinin büyük bir kısmı işletme döneminde oluşmaktadır. Bu maliyetleri düşürebilmek için tesis yönetimi sistemlerinin BIM modelleri ile entegrasyonu sektörde yeni olanaklar sağlamaktadır. Bu çalışmada BIM tesis yönetimi entegrasyonu ile daha verimli enerji tüketim analizleri ve daha başarılı bakım planları oluşturmak için bir yol gösterilecektir.

Anahtar Kelimeler

tesis yönetimi, BIM, Enerji Analizi, Proaktif Bakım

Kaynakça

• Akcamete, A., Akinci, B., and Garrett, J., 2010. Potential utilization of building information models for planning maintenance activities, 13th International Conference on Computing in Civil and Building Engineering, University of Nottingham, Nottingham, United Kingdom, 30 June-2 July.
• Al-Shalabi, F. and Turkan, Y., 2015. A Novel Framework for BIM Enabled Facility Energy Management – A Concept Paper, 5th International/11th Construction Specialty Conference, Vancouver, British Columbia, June 8-10.
• Al-Shalabi, F., 2016. BIM Framework for Energy and Maintenance Performance Assessment for Facility Management, PhD Thesis, Iowa State University, Ames, Iowa, United States.
• Azhar, S. 2011. Building information modeling (BIM): Trends, benefits, risks, and challenges for the AEC industry. Leadership and Management in Engineering, 11(3), 241-252.
• Barlish, K., 2011. How to Measure the Benefits of BIM, MSc Thesis, Arizona State University, Tempe, Arizona, United States.
• Becerik-Gerber, B., Jazizadeh, F., Li, N., and Calis, G. 2011. Application areas and data requirements for BIM-enabled facilities management, Journal of construction engineering and management, 138(3), 431-442.
• Beltran, A., Erickson, V. L., and Cerpa, A. E. ,2013. "Thermosense: Occupancy thermal based sensing for hvac control." Proc., Proceedings of the 5th ACM Workshop on Embedded Systems For Energy-Efficient Buildings, ACM, 1-8.
• Cahill, B., Menzel K. and Flynn D., 2012. BIM as a centre piece for optimised building operation, eWork and eBusiness in Architecture, Engineering and Construction, 549-555.
• Demirdöğen, G., Işık, Z. and Arayıcı, Y., 2020. Lean Management Framework for Healthcare Facilities Integrating BIM, BEPS and Big Data Analytics, Sustainability, 12, 7061
• Doty, S., and Turner, W. C., 2009. Energy management handbook, The Fairmont Press, Inc, Georgia. East, E.W., 2007. Construction Operations Building Information Exchange (COBIE): Requirements definition and pilot implementation standard, ERDC/CERL TR-07-30.
• East, E.W., Nisbet, N., and Wix, J., 2009. Lightweight capture if as-built construction information, In: 26th International Conference on IT in Construction, Istanbul, Turkey.
• Eastman, C., Teicholz, P., Sacks, R., and Liston, K., 2011. BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors, John Wiley & Sons.
• Edirisinghe, R., London, K., Kalutara, P. and Aranda-Mena, G., 2017. Building information modelling for facility management: are we there yet?, Engineering, Consruction and Architectural Management, 24, 6, 1119-1154.
• Gallaher, M.P., O'Connor, A.C., Dettbarn, J.L., Jr., Gilday, L.T., 2004. Cost Analysis of Inadequate Interoperability in the U.S. Capital Facilities Industry. U.S. Department of Commerce, NIST GCR 04-867.
• Jones, R., Fuertes., A. and Wilde, P., 2015. The Gap Between Simulated and Measured Energy Performance: A Case Study Across Six Identical New-Build Flats in the UK, 14th Conference of International Building Performance Simulation Association, Hyderabad, India, 7-9 December, 2248-2255.
• Katranuschkov, P., Scherer, R., Weise and Liebich, T., 2014. Extending BIM for Energy Simulation and Design Tasks, 2014 International Conference on Computing in Civil and Building Engineering, Orlando, Florida, United States, June 23-25, 625-632.
• Kelly, G., Serginson, M., Lockley, S., Dawood N. and Kassem M., 2013. BIM for Facility Management: A Review and a Case Study Investigating the Value and Challenges, 13th International Conference on Construction Applications of Virtual Reality, London, United Kingdom, October 30-31.
• Kim, H., Shen, Z., Kim, I., Kim, K., Stumpf, A., and Yu, J., 2016. "BIM IFC information mapping to building energy analysis (BEA) model with manually extended material information." Automation in Construction, 68, 183-193.
• Klammt, F., 2001. Financial Management for Facility Managers. In TEICHOLZ E., ed. Facility Design and Management Handbook, McGraw-Hill Companies Inc, pp. 5.1-5.37, New York.
• Mobley, R.K., 2008. Corrective Maintenance. In: Mobley R.K., Higgins, L.R., Wikoff, D.J, eds. Maintenance Engineering Handbook.: McGraw-Hill Companies Inc., pp. 2.3-2.6, New York.
• Roper, K. O., and Payant, R. P., 2014. The Facility Management Handbook, AMACOM Div American Mgmt Assn.
• Sanvido, V., 2013. Computer Integrated Construction Research Program, BIM Planning Guide for FacilityOwners, The Pennsylvania State University, University Park, PA, USA.
• Suprabhas, K., 2016. Integration of BIM and Utility Sensor Data for Facilities Management, MSc Thesis, Purdue University, West Lafayette, Indiana, United States.
• Sullivan, G.P., Pugh, R., Melendez, A.P., and Hunt, W.D., 2004. Operations and Maintenance Best Practices: A
• Teraoka, H., Balaji, B., Zhang, R., Nwokafor, A., Narayanaswamy, B., and Agarwal, Y., 2014. "BuildingSherlock: Fault Management Framework for HVAC Systems in Commercial Buildings." Technical Report, CSE, UCSD.
• Trabulci, M., 2020. Interoperability framework for BIM-FM based on a relational database, MSc Thesis, Universidade do Minho Escola de Engenharia, Braga.