DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER

Merve Tokgöz Çetindağ; Ayşef Meşe

doi:10.17567/ataunidfd.290443

DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER

Abstract

CAD/CAM sistemleri (bilgisayar destekli tasarım/ bilgi- sayar destekli üretim) diş hekimliğinde 1985 yılından beri kullanılmaktadır. Son 30 yılda teknolojinin ilerle- mesiyle üstün özelliklerde çeşitli klinik ve laboratuvar CAD/CAM sistemleri geliştirilmeye devam etmektedir. Özellikle hasta başında kullanılan CAD/CAM sistem- lerinin yaygınlaşması ile birlikte protetik tedavilerin tek seansta bitirilmesi amaçlanarak, laboratuvar aşama- larının elimine edilmesini sağlayacak materyallerin gelişimi hızlanmıştır. Bu derlemede günümüzde diş hekimliğinde kullanılan CAD/CAM sistemleri ve materyaller anlatılmıştır.

Anahtar kelimeler: CAD/CAM, materyaller, sistemler

DENTAL CAD/CAM (COMPUTER AIDED DESIGN/COMPUTER AIDED MANUFACTURING) SYSTEMS AND MATERIALSABSTRACT

CAD/CAM systems (computer aided design/computer aided manufacturing) has been used in dentistry since 1985. In the past 30 years, development of various high quality chairside and laboratory CAD/CAM systems has been continued with the progress of technology. Especially the improvements of CAD/CAM systems lets the practitioners choose different restorative materials than the conventional ones, place chairside restorations and also descrease the laboratory procedures. This article describes currently used CAD/CAM systems and materials.

Key words: CAD/CAM, materials, systems

Keywords

CAD/CAM,materyaller

References

1. Karaalioğlu OF, Duymuş ZY, Diş hekimliğinde uygulanan CAD/CAM sistemleri, Atatürk Üniv Diş Hek Fak Derg. 2008; 18: 25-32.
2. Strub JR, Rekow ED, Witkowski S, Computer-aided design and fabrication of dental restorations: Current systems and future possibilities, J Am Dent Assoc. 2006; 137: 1289- 96.
3. Giordano R, Materials for chairside CAD/CAM-produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
4. Fasbinder DJ, Clinical performance of chairside CAD/CAM restorations, J Am Dent Assoc. 2006; 137: 225-315.
5. Raigrodski AJ, Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literatüre, J Prosthet Dent. 2004 Dec; 92: 557-62.
6. Sjögren G, Molin M, van Dijken JWV, A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite, Int J Prosthodont. 2004; 17: 241-6.
7. Denissen HW, van der Zel JM, van Waas MAJ, Measurement of the margins of partial-coverage tooth preparations for CAD/CAM, Int J Prosthodont. 1999; 12: 395-400.
8. Williams RJ, Bibb R, Rafik T, A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying, J Prosthet Dent. 2004; 91: 85-8.

9. Marchack CB, CAD/CAM-guided implant surgery and fabrication of an immediately loaded prosthesis for a partially edentulous patient, J Prosthet Dent. 2007; 97: 389- 94.
10. Williams RJ, Bibb R, Eggbeer D, Collis J, Use of CAD/ CAM technology to fabricate a removable partial denture framework, J Prosthet Dent. 2006; 96: 96-9.
21. Duret D, Preston JD, CAD/CAM imaging in dentistry, Curr Opinion Dent. 1991; 1: 150–154.
22. Feuerstein P, Can technology help dentists deliver better patient care?, J Am Dent Assoc. 2004; 135; 11-6.
23. Christensen GJ, Computerized restorative dentistry: State of the art, J Am Dent Assoc. 2001; 132: 1301- 3.
24. Giordano R, Materials for Chairside CAD/CAM produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
25. Liu PR, Essig ME, A panorama of dental CAD/CAM restorative systems, Compend Contin Educ Dent. 2008; 29: 482-93.
26. Rosentiel SF, Land MF, Fujimoto J, Contemporary fixed prosthodontics, The C. V. Mosby Company. 2001: 643-72.
27. Çelik G, Computer aided dentstry and current CAD/CAM systems, Cumhuriyet Dent J. 2013; 16: 74-82.
28. Miyazaki T, Hotta Y, Kunii J,  Kuriyama S, Tamaki Y, A review of dental CAD/CAM: current status and future perspectives from 20 years of experience, Dent Mater J. 2009; 28: 44-56.
29. Andersson M, Ogden A, A new all- ceramic crown: a densely sintered, high purity alumina coping with porcelain, Acta Odontol Scand. 1993; 51: 59-64.
30. Conrad HJ, Seong WJ, Pesun IJ, Current ceramic materials and systems with clinical recommendations: a systematic review, J Prosthet Dent. 2007; 98: 389-404
41. Kelly JR, Nishimura I, Campbell SD, Ceramics in dentistry: historical roots and current perspectives, J Prosthet Dent. 1996; 75: 18-32.
42. Giordano RA, Dental ceramic restorative systems, Compend Contin Educ Dent. 1996; 17: 779-82.
43. Albakry M, Guazzato M, Swain MV, Biaxial flexural strenghth and microstructure changes of two recycled pressable glass ceramics, J Prosthodont. 2004; 13: 141-9.
44. Tinschert J, Zwez D, Marx R, Anusavice KJ, Structural reliability of alümina-feldspar-leucite-mica and zirconia-based ceramics, J Dent. 2000; 28: 529-35.
45. Fasbinder DJ, Restorative material options for CAD/CAM restorations, Compend Contin Educ Dent. 2002; 23: 911-916, 918-20.
46. Pagniano RP, Seghi RR, Rosenstiel SF, Wang R, Katsube N, The affect of a layer of resin luting agent on the biaxial flexural strenght of two all-ceramic systems, J Prosthet Dent. 2005; 93: 459-66.
47. Rosenstiel SF, Land MF, Fujımato J, Contemporary fixed prosthodontics, 4th ed, St Louis: Mosby Elsevier;2006.
48. Ritzberger C, Apel E, Höland W, Perschke A, Rheinberger VM, Properties and clinical application of three types of dental glass-ceramics and ceramics for CAD/CAM Technologies, Metarials. 2010; 33: 700-13.
49. Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP, Monolithic CAD/CAM lihium disilicate versus veneered YTZ-P crowns: comparison of failure modes and reliability after fatigue, Int J Prosthodont. 2010; 23: 434-42.
50. Taskonak B, Mecholsky JJ Jr, Anusavice KJ, Residual stress in bilayer dental seramics, Biomaterials. 2005; 26: 3235-41
60. Raigrodski AJ, Contemporary all ceramic fixed partial dentures:a review, Dent Clin North Am. 2004; 48: 531-44.
61. Güth JF, Zuch T, Zwinge S, Engels J, Stimmelmayr M, Edelhoff D, Optical properties of manually and CAD/CAM-fabricated polymers, Dent Mater J. 2013; 32: 865-71.
62. Höland W, Schweiger M, Frank M, Rheinberger V, A comparison of the microstructure and properties of the IPS Empress glass ceramics, J Biomed Mater Res. 2000; 53: 297-303.
63. Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, et al, Mechanical properties of composite resin blocks for CAD/CAM, Dent Mater J. 2014; 33: 705-10.
64. Mehl C, Harder S, Byrne A, Kern M, Prosthodontics in digital times: a case report, Quintessence Int. 2013; 44: 29-36.
65. Zimmermann M, Mehl A, Reich S, New CAD/CAM materials and blocks for chairside procedures, Int J Comp Dent. 2013; 16: 173-81.

Details

Primary Language

Turkish

Subjects

-

Journal Section

Review

Authors

Merve Tokgöz Çetindağ This is me

Ayşef Meşe This is me

Publication Date

December 1, 2016

Submission Date

February 7, 2017

Acceptance Date

April 7, 2016

Published in Issue

Year 2016 Volume: 26 Number: 3

DOI

https://doi.org/10.17567/ataunidfd.290443

IZ

https://izlik.org/JA27SX27XD

Cite

RIS / Bibtex

APA

Tokgöz Çetindağ, M., & Meşe, A. (2016). DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 26(3), 524-533. https://doi.org/10.17567/ataunidfd.290443

AMA

1.Tokgöz Çetindağ M, Meşe A. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2016;26(3):524-533. doi:10.17567/ataunidfd.290443

Chicago

Tokgöz Çetindağ, Merve, and Ayşef Meşe. 2016. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD CAM (BİLGİSAYAR DESTEKLİ TASARIM BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26 (3): 524-33. https://doi.org/10.17567/ataunidfd.290443.

EndNote

Tokgöz Çetindağ M, Meşe A (December 1, 2016) DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26 3 524–533.

IEEE

[1]M. Tokgöz Çetindağ and A. Meşe, “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”, Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, vol. 26, no. 3, pp. 524–533, Dec. 2016, doi: 10.17567/ataunidfd.290443.

ISNAD

Tokgöz Çetindağ, Merve - Meşe, Ayşef. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD CAM (BİLGİSAYAR DESTEKLİ TASARIM BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26/3 (December 1, 2016): 524-533. https://doi.org/10.17567/ataunidfd.290443.

JAMA

1.Tokgöz Çetindağ M, Meşe A. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2016;26:524–533.

MLA

Tokgöz Çetindağ, Merve, and Ayşef Meşe. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD CAM (BİLGİSAYAR DESTEKLİ TASARIM BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, vol. 26, no. 3, Dec. 2016, pp. 524-33, doi:10.17567/ataunidfd.290443.

Vancouver

1.Merve Tokgöz Çetindağ, Ayşef Meşe. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2016 Dec. 1;26(3):524-33. doi:10.17567/ataunidfd.290443