DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER

Merve Tokgöz Çetindağ; Ayşef Meşe

doi:10.17567/ataunidfd.290443

DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER

Öz

CAD/CAM sistemleri (bilgisayar destekli tasarım/ bilgi- sayar destekli üretim) diş hekimliğinde 1985 yılından beri kullanılmaktadır. Son 30 yılda teknolojinin ilerle- mesiyle üstün özelliklerde çeşitli klinik ve laboratuvar CAD/CAM sistemleri geliştirilmeye devam etmektedir. Özellikle hasta başında kullanılan CAD/CAM sistem- lerinin yaygınlaşması ile birlikte protetik tedavilerin tek seansta bitirilmesi amaçlanarak, laboratuvar aşama- larının elimine edilmesini sağlayacak materyallerin gelişimi hızlanmıştır. Bu derlemede günümüzde diş hekimliğinde kullanılan CAD/CAM sistemleri ve materyaller anlatılmıştır.

Anahtar kelimeler: CAD/CAM, materyaller, sistemler

DENTAL CAD/CAM (COMPUTER AIDED DESIGN/COMPUTER AIDED MANUFACTURING) SYSTEMS AND MATERIALSABSTRACT

CAD/CAM systems (computer aided design/computer aided manufacturing) has been used in dentistry since 1985. In the past 30 years, development of various high quality chairside and laboratory CAD/CAM systems has been continued with the progress of technology. Especially the improvements of CAD/CAM systems lets the practitioners choose different restorative materials than the conventional ones, place chairside restorations and also descrease the laboratory procedures. This article describes currently used CAD/CAM systems and materials.

Key words: CAD/CAM, materials, systems

Anahtar Kelimeler

CAD/CAM,materyaller

Kaynakça

1. Karaalioğlu OF, Duymuş ZY, Diş hekimliğinde uygulanan CAD/CAM sistemleri, Atatürk Üniv Diş Hek Fak Derg. 2008; 18: 25-32.
2. Strub JR, Rekow ED, Witkowski S, Computer-aided design and fabrication of dental restorations: Current systems and future possibilities, J Am Dent Assoc. 2006; 137: 1289- 96.
3. Giordano R, Materials for chairside CAD/CAM-produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
4. Fasbinder DJ, Clinical performance of chairside CAD/CAM restorations, J Am Dent Assoc. 2006; 137: 225-315.
5. Raigrodski AJ, Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literatüre, J Prosthet Dent. 2004 Dec; 92: 557-62.
6. Sjögren G, Molin M, van Dijken JWV, A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite, Int J Prosthodont. 2004; 17: 241-6.
7. Denissen HW, van der Zel JM, van Waas MAJ, Measurement of the margins of partial-coverage tooth preparations for CAD/CAM, Int J Prosthodont. 1999; 12: 395-400.
8. Williams RJ, Bibb R, Rafik T, A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying, J Prosthet Dent. 2004; 91: 85-8.

9. Marchack CB, CAD/CAM-guided implant surgery and fabrication of an immediately loaded prosthesis for a partially edentulous patient, J Prosthet Dent. 2007; 97: 389- 94.
10. Williams RJ, Bibb R, Eggbeer D, Collis J, Use of CAD/ CAM technology to fabricate a removable partial denture framework, J Prosthet Dent. 2006; 96: 96-9.
21. Duret D, Preston JD, CAD/CAM imaging in dentistry, Curr Opinion Dent. 1991; 1: 150–154.
22. Feuerstein P, Can technology help dentists deliver better patient care?, J Am Dent Assoc. 2004; 135; 11-6.
23. Christensen GJ, Computerized restorative dentistry: State of the art, J Am Dent Assoc. 2001; 132: 1301- 3.
24. Giordano R, Materials for Chairside CAD/CAM produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
25. Liu PR, Essig ME, A panorama of dental CAD/CAM restorative systems, Compend Contin Educ Dent. 2008; 29: 482-93.
26. Rosentiel SF, Land MF, Fujimoto J, Contemporary fixed prosthodontics, The C. V. Mosby Company. 2001: 643-72.
27. Çelik G, Computer aided dentstry and current CAD/CAM systems, Cumhuriyet Dent J. 2013; 16: 74-82.
28. Miyazaki T, Hotta Y, Kunii J,  Kuriyama S, Tamaki Y, A review of dental CAD/CAM: current status and future perspectives from 20 years of experience, Dent Mater J. 2009; 28: 44-56.
29. Andersson M, Ogden A, A new all- ceramic crown: a densely sintered, high purity alumina coping with porcelain, Acta Odontol Scand. 1993; 51: 59-64.
30. Conrad HJ, Seong WJ, Pesun IJ, Current ceramic materials and systems with clinical recommendations: a systematic review, J Prosthet Dent. 2007; 98: 389-404
41. Kelly JR, Nishimura I, Campbell SD, Ceramics in dentistry: historical roots and current perspectives, J Prosthet Dent. 1996; 75: 18-32.
42. Giordano RA, Dental ceramic restorative systems, Compend Contin Educ Dent. 1996; 17: 779-82.
43. Albakry M, Guazzato M, Swain MV, Biaxial flexural strenghth and microstructure changes of two recycled pressable glass ceramics, J Prosthodont. 2004; 13: 141-9.
44. Tinschert J, Zwez D, Marx R, Anusavice KJ, Structural reliability of alümina-feldspar-leucite-mica and zirconia-based ceramics, J Dent. 2000; 28: 529-35.
45. Fasbinder DJ, Restorative material options for CAD/CAM restorations, Compend Contin Educ Dent. 2002; 23: 911-916, 918-20.
46. Pagniano RP, Seghi RR, Rosenstiel SF, Wang R, Katsube N, The affect of a layer of resin luting agent on the biaxial flexural strenght of two all-ceramic systems, J Prosthet Dent. 2005; 93: 459-66.
47. Rosenstiel SF, Land MF, Fujımato J, Contemporary fixed prosthodontics, 4th ed, St Louis: Mosby Elsevier;2006.
48. Ritzberger C, Apel E, Höland W, Perschke A, Rheinberger VM, Properties and clinical application of three types of dental glass-ceramics and ceramics for CAD/CAM Technologies, Metarials. 2010; 33: 700-13.
49. Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP, Monolithic CAD/CAM lihium disilicate versus veneered YTZ-P crowns: comparison of failure modes and reliability after fatigue, Int J Prosthodont. 2010; 23: 434-42.
50. Taskonak B, Mecholsky JJ Jr, Anusavice KJ, Residual stress in bilayer dental seramics, Biomaterials. 2005; 26: 3235-41
60. Raigrodski AJ, Contemporary all ceramic fixed partial dentures:a review, Dent Clin North Am. 2004; 48: 531-44.
61. Güth JF, Zuch T, Zwinge S, Engels J, Stimmelmayr M, Edelhoff D, Optical properties of manually and CAD/CAM-fabricated polymers, Dent Mater J. 2013; 32: 865-71.
62. Höland W, Schweiger M, Frank M, Rheinberger V, A comparison of the microstructure and properties of the IPS Empress glass ceramics, J Biomed Mater Res. 2000; 53: 297-303.
63. Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, et al, Mechanical properties of composite resin blocks for CAD/CAM, Dent Mater J. 2014; 33: 705-10.
64. Mehl C, Harder S, Byrne A, Kern M, Prosthodontics in digital times: a case report, Quintessence Int. 2013; 44: 29-36.
65. Zimmermann M, Mehl A, Reich S, New CAD/CAM materials and blocks for chairside procedures, Int J Comp Dent. 2013; 16: 173-81.

Ayrıntılar

Birincil Dil

Türkçe

Konular

-

Bölüm

Derleme

Yazarlar

Merve Tokgöz Çetindağ Bu kişi benim

Ayşef Meşe Bu kişi benim

Yayımlanma Tarihi

1 Aralık 2016

Gönderilme Tarihi

7 Şubat 2017

Kabul Tarihi

7 Nisan 2016

Yayımlandığı Sayı

Yıl 2016 Cilt: 26 Sayı: 3

DOI

https://doi.org/10.17567/ataunidfd.290443

IZ

https://izlik.org/JA27SX27XD

Kaynak Göster

RIS / Bibtex

APA

Tokgöz Çetindağ, M., & Meşe, A. (2016). DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 26(3), 524-533. https://doi.org/10.17567/ataunidfd.290443

AMA

1.Tokgöz Çetindağ M, Meşe A. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Ata Diş Hek Fak Derg. 2016;26(3):524-533. doi:10.17567/ataunidfd.290443

Chicago

Tokgöz Çetindağ, Merve, ve Ayşef Meşe. 2016. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26 (3): 524-33. https://doi.org/10.17567/ataunidfd.290443.

EndNote

Tokgöz Çetindağ M, Meşe A (01 Aralık 2016) DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26 3 524–533.

IEEE

[1]M. Tokgöz Çetindağ ve A. Meşe, “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”, Ata Diş Hek Fak Derg, c. 26, sy 3, ss. 524–533, Ara. 2016, doi: 10.17567/ataunidfd.290443.

ISNAD

Tokgöz Çetindağ, Merve - Meşe, Ayşef. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26/3 (01 Aralık 2016): 524-533. https://doi.org/10.17567/ataunidfd.290443.

JAMA

1.Tokgöz Çetindağ M, Meşe A. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Ata Diş Hek Fak Derg. 2016;26:524–533.

MLA

Tokgöz Çetindağ, Merve, ve Ayşef Meşe. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, c. 26, sy 3, Aralık 2016, ss. 524-33, doi:10.17567/ataunidfd.290443.

Vancouver

1.Merve Tokgöz Çetindağ, Ayşef Meşe. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Ata Diş Hek Fak Derg. 01 Aralık 2016;26(3):524-33. doi:10.17567/ataunidfd.290443