BESİN TAKLİDİ SIVILARIN SELF ADEZİV REZİN SİMANLARIN RENK DEĞİŞİMİNE ETKİSİ

Year 2021, Volume: 31 Issue: 2, 234 - 240, 15.04.2021

Meral Kurt Yiğit Yamalı Merve Bankoğlu Güngör Seçil Karakoca Nemli Bilge Turhan Bal

https://doi.org/10.17567/ataunidfd.840997

Cited By: 1

Abstract

Amaç: Bu çalışmada besin taklidi sıvıların dört farklı self adeziv rezin simanın renk değişimine etkisinin incelenmesi amaçlanmıştır.
Yöntem: Çalışmada dört farklı self adeziv rezin simandan (Zirconite, HighBond, Zenitcem, ve Totalcem) 80 adet örnek hazırlandı. Disk şeklindeki kalıplara yerleştirilen simanlar şeffaf bantla kapatıldıktan sonra üretici firma talimatları doğrultusunda ışıkla polimerize edildi. Her bir simandan hazırlanan örnekler distile su, heptan, sitrik asit ve etanol sıvılarında bekletilmek üzere dört alt gruba ayrıldı (n=5). Test örnekleri oda sıcaklığında 7 gün boyunca besin taklidi sıvılarda bekletildi. Örneklerin başlangıç ve 7. günlerde renk ölçümleri spektrofotometre ile gerçekleştirildi ve ΔE00 değerleri hesaplandı. Veriler, iki yönlü ANOVA ve Tukey HSD testleri kullanılarak istatistik olarak analiz edildi (α=0,05).
Bulgular: Totalcem grubu hariç tüm materyaller için etanolün diğer sıvılara kıyasla anlamlı derecede daha yüksek renk değişikliğine sebep olduğu gözlendi (P<0,05). Totalcem materyalinde ise en yüksek renk değişiminin heptan grubunda gerçekleştiği, ancak heptan ve etanol grubu arasında istatistik olarak anlamlı farkın gözlenmediği bulundu (P>0,05). Distile suyun, Zirconite’in rengi üzerine Totalcem’e kıyasla daha fazla etkisinin olduğu tespit edildi (P<0,05). Sitrik asitte bekletilen siman grupları arasında anlamlı fark bulunmadı (P>0,05). En yüksek renk değişimi değeri etanol sıvısında bekletilen Highbond grubunda (4,27 ±2,34) gözlenirken, en düşük renk değişimi değeri ise distile suda bekletilen Totalcem grubunda (0,34±0,07) tespit edildi.
Sonuç: Besin taklidi sıvıların self adeziv rezin simanların renk değişimi üzerine farklı etkilerinin olduğu bulundu. Genel olarak etanolün self adeziv rezin simanlarda daha fazla renk değişikliğine neden olduğu gözlendi.
Anahtar Kelimeler: Besin taklidi sıvılar; renk; rezin simanlar
Effect of food-simulating liquids on the color change of self-adhesive resin cements
Abstract
Objective: The aim of present study was to evaluate the effect of food-simulating liquids on the color change of the four different self-adhesive resin cements.
Materials-Methods: In this study, eighty specimens of four different resin cements (Zirconite, HighBond, Zenitcem, and Totalcem) were prepared. The materials were placed into disc-shaped molds covered using mylar strips, then cured in accordance with the manufacturers’ recommendations. The specimens of each cement were divided into four subgroups as (n=5): distilled water, heptane, citric acid, and ethanol. The specimens were kept in the solutions for 7 days at room temperature. Before and after 7 days of storage color measurements were performed by using spectrophotometer and ΔE00 values were calculated. Data were analyzed with two-way ANOVA and Tukey HSD tests (α=0.05).
Results: For all materials except Totalcem, it was observed that ethanol caused significantly higher color change than other liquids (P<0.05). However, in Totalcem the highest color change was observed in heptane group, but no statically significant difference was found between heptane and ethanol groups. It was observed that distilled water was more effective on the color change of Zirconite than Totalcem (P<0.05). There was no statically significant difference among the cement groups after storing in citric acid solution (P> 0.05). The highest color change value was found in HighBond (4.27 ± 2.34) which was stored in ethanol solution, while the lowest color change value was observed in Totalcem (0.34 ± 0.07) stored in distilled water.
Conclusion: It was found that food-simulating liquids had different effects on the color change of self-adhesive resin cements. In general, it was observed that ethanol caused more color change in self-adhesive resin cements.
Key Words: Color; food-simulating liquids; resin cements

Keywords

renk, Besin taklidi sıvılar, rezin simanlar

References

• 1. Bayindir F, Koseoglu M. The effect of restoration thickness and resin cement shade on the color and translucency of a high-translucency monolithic zirconia. J Prosthet Dent. 2020;123(1):149-54.
• 2. Silami F, Tonani R, Alandia-Roman CC, Pires-De-Souza F. Influence of different types of resin luting agents on color stability of ceramic laminate veneers subjected to accelerated artificial aging. Braz Dent J. 2016;27(1):95-100.
• 3. Krämer N, Reinelt C, Richter G, Frankenberger R. Four-year clinical performance and marginal analysis of pressed glass ceramic inlays luted with ormocer restorative vs. conventional luting composite. J Dent. 2009;37(11):813-9.
• 4. Van Dijken JWV, Hasselrot L. A prospective 15-year evaluation of extensive dentin-enamel-bonded pressed ceramic coverages. Dent Mater. 2010;26(9):929-39.
• 5. Beier US. Clinical long-term evaluation and failure characteristics of 1,335 all-ceramic restorations. Int J Prosthodont. 2012;25:70–8.
• 6. Weiser F, Behr M. Self-adhesive resin cements: a clinical review. J Prosthodont. 2015;24(2):100-8.
• 7. Kooi TJM, Tan QZ, Yap AUJ, Guo W, Tay KJ, Soh MS. Effects of food-simulating liquids on surface properties of giomer restoratives. Oper Dent. 2012;37(6):665-71.
• 8. Liebermann A, Roos M, Stawarczyk B. The effect of different storage media on color stability of self-adhesive composite resin cements for up to one year. Materials (Basel). 2017;10(3):1-13.
• 9. Yesilyurt C, Yoldas O, Altintas SH, Kusgoz A. Effects of food-simulating liquids on the mechanical properties of a silorane-based dental composite. Dent Mater J. 2009;28(3):362-7.
• 10. Akova T, Ozkomur A, Uysal H. Effect of food-simulating liquids on the mechanical properties of provisional restorative materials. Dent Mater. 2006;22(12):1130-4.
• 11. Food and Drug Administration. FDA guidelines for chemistry and technology requirements of indirect additive petitions. Washington: FDA; 1976.
• 12. Pecho OE, Ghinea R, Alessandretti R, Pérez MM, Della Bona A. Visual and instrumental shade matching using CIELAB and CIEDE2000 color difference formulas. Dent Mater. 2016;32(1):82-92.
• 13. CIE (Commission Internationale de l’Eclairage): Colorimetry- technical report (ed 3rd). CIE Publication 15. Vienna, CIE Central Bureau, 2004
• 14. Luo MR, Cui G, Rigg B. The development of the CIE 2000 colour-difference formula: CIEDE2000. Color Res Appl. 2001;26(5):340-50.
• 15. Choi MS, Lee YK, Lim BS, Rhee SH, Yang HC, Lim YJ. Changes in color and translucency of porcelain-repairing resin composites after thermocycling. J Biomed Mater Res - Part B Appl Biomater. 2006;78(1):1-6.
• 16. Catelan A, Briso ALF, Sundfeld RH, Goiato MC, Dos Santos PH. Color stability of sealed composite resin restorative materials after ultraviolet artificial aging and immersion in staining solutions. J Prosthet Dent. 2011;105(4):236-41.
• 17. Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent. 2010;38(suppl. 2):57-64.
• 18. Almeida JR, Schmitt GU, Kaizer MR, Boscato N, Moraes RR. Resin-based luting agents and color stability of bonded ceramic veneers. J Prosthet Dent. 2015;114(2):272-7.
• 19. Eweis AH, Yap AUJ, Yahya NA. Dynamic analysis of bulk-fill composites: Effect of food-simulating liquids. J Mech Behav Biomed Mater. 2017;74:183-8.
• 20. Sideridou ID, Vouvoudi EC, Adamidou EA. Dynamic mechanical thermal properties of the dental light-cured nanohybrid composite Kalore, GC: Effect of various food/oral simulating liquids. Dent Mater. 2015;31(2):154-61.
• 21. Tanthanuch S, Kukiattrakoon B, Eiam-O-Pas K, Pokawattana K, Pamanee N, Thongkamkaew W, et al. Surface changes of various bulk-fill resin-based composites after exposure to different food-simulating liquid and beverages. J Esthet Restor Dent. 2018;30(2):126-35
• 22. McKinney JE, Wu W. Chemical softening and wear of dental composites. J Dent Res. 1985;64(11):1326-31.
• 23. Vouvoudi EC, Sideridou ID. Dynamic mechanical properties of dental nanofilled light-cured resin composites: Effect of food-simulating liquids. J Mech Behav Biomed Mater. 2012;10:87-96.
• 24. Kao EC. Influence of food-simulating solvents on resin composites and glass-ionomer restorative cement. Dent Mater. 1989;5(3):201-8.
• 25. Mohammadi E, Pishevar L, Boroujeni PM. Effect of food simulating liquids on the flexural strength of a methacrylate and silorane-based composite. PLoS One. 2017;12(12):1-8.
• 26. Vouvoudi EC, Sideridou ID. Effect of food/oral-simulating liquids on dynamic mechanical thermal properties of dental nanohybrid light-cured resin composites. Dent Mater. 2013;29(8):842-50.
• 27. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent. 2005;33(5):389-98.
• 28. Silva TM Da, Sales ALLS, Pucci CR, Borges AB, Torres CRG. The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins. Acta Biomater Odontol Scand. 2017;3(1):1-7.
• 29. Cabadağ ÖG, Gönülol N, Almasifar L, Misilli T. Gıdaları taklit eden solüsyonların bulk-fill kompozitlerin renklenmesine etkisi. Yeditepe Dent J. 2020;16(3):198-204.
• 30. Lu H, Powers JM. Color stability of resin cements after accelerated aging. Am J Dent. 2004;17(5):354-8.
• 31. Turgut S, Bagis B. Effect of resin cement and ceramic thickness on final color of laminate veneers: An in vitro study. J Prosthet Dent. 2013;109(3):179-86.
• 32. Wee AG, Lindsey DT, Shroyer KM, Johnston WM. Use of a porcelain color discrimination test to evaluate color difference formulas. J Esthet Restor Dent. 2009;21(2):135-6.
• 33. Melgosa M, Huertas R, Berns RS. Performance of recent advanced color-difference formulas using the standardized residual sum of squares index. J Opt Soc Am A Opt Image Sci Vis. 2008;25(7):1828-34.
• 34. Polychronakis N, Lagouvardos P, Polyzois G, Sykaras N, Zoidis P. Color changes of polyetheretherketone (PEEK) and polyoxymethelene (POM) denture resins on single and combined staining/cleansing action by CIELab and CIEDE2000 formulas. J Prosthodont Res. 2019:6-13.
• 35. Dede DÖ, Şahin O, Koroglu A, Yilmaz B. Effect of sealant agents on the color stability and surface roughness of nanohybrid composite resins. J Prosthet Dent. 2016;116(1):119-28.
• 36. Sideridou ID, Vouvoudi EC, Keridou IV. Sorption characteristics of oral/food simulating liquids by the dental light-cured nanohybrid composite Kalore GC. Dent Mater. 2015;31(9):e179-89.
• 37. Marghalani HY. Sorption and solubility characteristics of self-adhesive resin cements. Dent Mater. 2012;28(10):e187-98.
• 38. Dikicier S. Diş hekimliğinde adezyon ve adeziv rezin simanlarda güncel yaklaşımlar. Atatürk Üniv Diş Hek Fak Derg. 2016;26:152-8.
• 39. Soderholm KJM. Leaking of fillers in dental composites. J Dent Res. 1983;62(2):126-30.
• 40. Yap AU, Low JS, Ong LF. Effect of food-simulating liquids on surface characteristics of composite and polyacid-modified composite restoratives. Oper Dent. 2000;25(3):170-6.