Research Article
BibTex RIS Cite

Yonga Levha ve Lif Levhaların Su Alma Davranışlarının Dijital Görüntü Korelasyon (DGK) Yöntemi ile Karakterize Edilmesi

Year 2018, Volume: 20 Issue: 3, 525 - 534, 15.12.2018

Abstract

Ahşap esaslı
kompozitler, mobilya sektöründe yaygın bir şekilde kullanılmaktadır. Özellikle,
mutfak ve banyo dolapları gibi kabin tipi mobilyaların üretiminde; yüzey
düzgünlüğü, kolay işlenebilirliği ve temin edilmesi, farklı üst yüzey
işlemlerinin rahatlıkla uygulanabilmesi gibi özellikleri nedeniyle en çok
kullanılan malzemelerden biridir. Kullanım yerinde maruz kalacakları ortamın
özellikleri, ahşap esaslı kompozit malzemelerin fiziksel özelliklerini,
dolayısıyla da performansını etkilemektedir. Bu nedenle üretim sonrasında ahşap
esaslı kompozit malzemeler bir dizi fiziksel ve mekanik testlerden
geçirilmektedir. Ahşap malzemeler özellikle suya karşı oldukça hassastır. Ahşap
esaslı malzemelerin su alma davranışı, mekanik performansları başta olmak üzere
birçok özelliğini etkilemektedir. Dijital Görüntü Korelasyonu (DGK) yöntemi,
bilimsel ve endüstriyel uygulamalarda önemli bilgiler ve pratik çözümler
sunmaktadır. Bu çalışmada yonga levha (kaplamalı ve kaplamasız) orta yoğunluklu
(kaplamasız) lif levhaların (MDF) su alma davranışları dijital görüntü
korelasyon yöntemi ile incelenmiştir. Uygulanan yöntem sayesinde kompozit
malzemelerin su alma davranışları görselleştirilmiştir. Aynı zamanda geleneksel
yöntemler ile belirlenemeyen yer değiştirme ve stres alanlarının detayları DGK
ile belirlenmiştir. Sonuçlar incelediğinde, kullanılan ahşap kompozit
malzemelerin su alma oranlarında farklar olduğu bulunmuştur. Dijital görüntü
korelasyonu yönetimi ile elde edilen sonuçların, deneysel sonuçlar ile uyumlu
olduğu görülmüştür.

References

  • Akkılıç H. (2004). Farklı yüzey malzemeleri ile kaplanan yonga levhaların teknolojik özellikleri. Journal of the Faculty of Forestry Istanbul University, 54(2), 109-129.
  • Avcı Ö, Bardak T, Bardak S. Akkaya Y. (2018). Evaluation of Employee's Happiness by Data Mining and Statistical Methods in the Process of Internal Public Relations. International Congress on Engineering and Life Science, 26-29 April, pp.29-32, Kastamonu/Turkey.
  • Bardak S, Bardak T, Avcı Ö, Akkaya Y. (2018). Evaluation of Learning Forms of Students Based on Data Mining: Bartın Vocational School Example. International Congress on Engineering and Life Science, 26-29 April, pp.25-28, Kastamonu/Turkey.
  • Cabuk Y, Karayilmazlar S, Onat SM, Kurt R (2013). Econometric modeling and projection of production, import and export of particle board industry in Turkey. International Journal of Physical Sciences, 8(5), 199- 209.
  • Efe H, Kasal, A. (2007). Çeşitli Masif ve Kompozit Ağaç Malzemelerin Bazı Fiziksel ve Mekanik Özelliklerinin Belirlenmesi,” Politeknik Dergisi, 10(3), 303–311.
  • Ekpunobi U, Eboatu AN, Okoye PA. (2013). Comparative Study on the Effect of Density on Water Absorption of Particle Boards Produced from Nipa Palm Fibres with HDPE Wastes. Pertanika Journal of Science and Technology, 21(2), 499–506.
  • EN 318 (2002). Wood-based panels – Determination of dimensional changes associated with changes in relative humidity
  • Güler C. (2015). Farklı Kalınlıklarda Üretilmiş Yonga Levhaların Bazı Teknolojik Özellikleri. Ormancılık Dergisi, 11(1), 52-63.
  • Gündüz G, Masraf Y (2005). Üç tabakalı yatık yongalı yonga levha üretiminde üretim şartlarının değiştirilmesinin levhaların mekanik ve fiziksel özellikleri üzerine etkisi. Bartın Orman Fakültesi Dergisi, 7(8), 49-57.
  • Harilal R, Vyasarayani CP, Ramji M. (2015). A linear least squares approach for evaluation of crack tip stress field parameters using DIC. Optics and Lasers in Engineering, 75, 95–102.
  • İçel B, Kayahan K, Avcı Ö. (2017). Yeni Tasarlanacak Mutfak Masa ve Sandalyelerinde Kullanıcı Beklentilerinin Belirlenmesi: Bartın İli TOKİ Konutlarına Yönelik Bir Araştırma. Journal of Bartin Faculty of Forestry, 19(2), 144-152.
  • İstek A, Kurşun C, Aydemir D, Köksal SE, Kelleci O. (2017). Yüzey Tabaka Yonga Oranının Yonga Levha Özelliklerine Etkisi. Journal of Bartin Faculty of Forestry, 19(1), 182-186.
  • Kallakas H, Närep M, Närep A, Poltimäe T, Kers J. (2018). Mechanical and physical properties of industrial hemp-based insulation materials. Proceedings of the Estonian Academy of Sciences, Teaduste Akadeemia Kirjastus, 67(2), 183–192.
  • Moubarik A, Mansouri HR, Pizzi, A. (2013). Improving UF particleboard adhesives water resistance by small albumin and sunflower oil additions. European Journal of Wood and Wood Products, 71(2), 277–279.
  • Nath F, Kimanzi RJ, Mokhtari M, Salehi S. (2018). A novel method to investigate cement-casing bonding using digital image correlation. Journal of Petroleum Science and Engineering, Elsevier, 166, 482–489.
  • Nemli G. (2003). Effects of Some Manufacturing Factors on the Properties of Particleboard Manufactured from Alder (Alnus glutinosa subsp. Barbata), Turk J Agric For 27: 99-104.
  • Nowak M, Maj M. (2018). Determination of coupled mechanical and thermal fields using 2D digital image correlation and infrared thermography: Numerical procedures and results. Archives of Civil and Mechanical Engineering, Elsevier, 18(2), 630–644.
  • Pan B, Qian K, Xie H, Asundi A. (2009). Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Measurement Science and Technology, IOP Publishing, 20(6), 062001.
  • Skarżyński Ł, Suchorzewski, J. (2018). Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography. Construction and Building Materials, 183, 283–299.
  • Sözen E, Bardak T, Peker H, Bardak S. (2017). Apriori Algoritması Kullanılarak Mobilya Seçimde Etkili Olan Faktörlerin Analizi. İleri Teknoloji Bilimleri Dergisi, 6(3), 679–684.
  • TS EN 317 (1999). Su içersine daldırma işleminden sonra kalınlığına şişme tayini, Yonga levhalar ve Lif Levhalar, Ankara. Nisan 1999. TS EN 323 (1999). Birim ağırlığının tayini, Ahşap Esaslı Levhalar, Ankara. Nisan 1999
  • TS EN 326-1 (1999). Ahşap esaslı levhalar-Numune alma kesme ve muayene, Ankara. Nisan 1999.
  • Vora SR, Bognet B, Patanwala HS, Young CD, Chang SY, Daux V, Ma AWK. (2018). Global strain field mapping of a particle-laden interface using digital image correlation. Journal of Colloid and Interface Science, Academic Press, 509, 94–101.
  • Zhao X, Wen Y, Zhao J, Zhao D. (2018). Study of the quality of wood texture patterns in digital image correlation. Optik, Urban & Fischer, 171, 370–376.
  • Zor M, Sozen E, Bardak T. (2016). Lamine Ahşap Malzemenin Mekanik Performansları ve Görüntü Analizi Yöntemiyle Eğilme Direnci Testinde Deformasyonun Belirlenmesi. Journal of Bartin Faculty of Forestry, 18(2), 126-136.

Characterization of Water Absorption Behavior of Particle Board and Fiber Board by Digital Image Correlation (DIC) Method

Year 2018, Volume: 20 Issue: 3, 525 - 534, 15.12.2018

Abstract

Wood-based composites
are widely used in the furniture industry. In particular, it is one of the most
widely used materials in the production of cabin type furniture such as kitchen
and bathroom cabinets, because of its smoothness, easy processability and
assurance of different surface treatments. The properties of the environment to
be exposed in the place of use have affected the physical properties and
therefore the performance of the wood-based composite materials. Therefore,
wood-based composite materials are subjected to a series of physical and
mechanical tests after the production. Wood materials are particularly
sensitive to water. Water absorption behavior of wood based materials affects
many properties, mainly mechanical performances.  Digital Image Correlation (DIC) method
provides important information and practical solutions in scientific and
industrial applications. In this study, water absorption behaviors of particle
board (coated and uncoated) medium density (uncoated) fiber boards (MDF) were
investigated by digital image correlation method. Water treatment behaviors of
composite materials are visualized by the applied method. The details of the
displacement and stress areas that cannot be determined by conventional methods
are also determined by the DIC. When the results were examined, it was found
that there were differences in water absorption rates of used composite
materials. The results obtained with digital image correlation method were
found to be consistent with the experimental results.

References

  • Akkılıç H. (2004). Farklı yüzey malzemeleri ile kaplanan yonga levhaların teknolojik özellikleri. Journal of the Faculty of Forestry Istanbul University, 54(2), 109-129.
  • Avcı Ö, Bardak T, Bardak S. Akkaya Y. (2018). Evaluation of Employee's Happiness by Data Mining and Statistical Methods in the Process of Internal Public Relations. International Congress on Engineering and Life Science, 26-29 April, pp.29-32, Kastamonu/Turkey.
  • Bardak S, Bardak T, Avcı Ö, Akkaya Y. (2018). Evaluation of Learning Forms of Students Based on Data Mining: Bartın Vocational School Example. International Congress on Engineering and Life Science, 26-29 April, pp.25-28, Kastamonu/Turkey.
  • Cabuk Y, Karayilmazlar S, Onat SM, Kurt R (2013). Econometric modeling and projection of production, import and export of particle board industry in Turkey. International Journal of Physical Sciences, 8(5), 199- 209.
  • Efe H, Kasal, A. (2007). Çeşitli Masif ve Kompozit Ağaç Malzemelerin Bazı Fiziksel ve Mekanik Özelliklerinin Belirlenmesi,” Politeknik Dergisi, 10(3), 303–311.
  • Ekpunobi U, Eboatu AN, Okoye PA. (2013). Comparative Study on the Effect of Density on Water Absorption of Particle Boards Produced from Nipa Palm Fibres with HDPE Wastes. Pertanika Journal of Science and Technology, 21(2), 499–506.
  • EN 318 (2002). Wood-based panels – Determination of dimensional changes associated with changes in relative humidity
  • Güler C. (2015). Farklı Kalınlıklarda Üretilmiş Yonga Levhaların Bazı Teknolojik Özellikleri. Ormancılık Dergisi, 11(1), 52-63.
  • Gündüz G, Masraf Y (2005). Üç tabakalı yatık yongalı yonga levha üretiminde üretim şartlarının değiştirilmesinin levhaların mekanik ve fiziksel özellikleri üzerine etkisi. Bartın Orman Fakültesi Dergisi, 7(8), 49-57.
  • Harilal R, Vyasarayani CP, Ramji M. (2015). A linear least squares approach for evaluation of crack tip stress field parameters using DIC. Optics and Lasers in Engineering, 75, 95–102.
  • İçel B, Kayahan K, Avcı Ö. (2017). Yeni Tasarlanacak Mutfak Masa ve Sandalyelerinde Kullanıcı Beklentilerinin Belirlenmesi: Bartın İli TOKİ Konutlarına Yönelik Bir Araştırma. Journal of Bartin Faculty of Forestry, 19(2), 144-152.
  • İstek A, Kurşun C, Aydemir D, Köksal SE, Kelleci O. (2017). Yüzey Tabaka Yonga Oranının Yonga Levha Özelliklerine Etkisi. Journal of Bartin Faculty of Forestry, 19(1), 182-186.
  • Kallakas H, Närep M, Närep A, Poltimäe T, Kers J. (2018). Mechanical and physical properties of industrial hemp-based insulation materials. Proceedings of the Estonian Academy of Sciences, Teaduste Akadeemia Kirjastus, 67(2), 183–192.
  • Moubarik A, Mansouri HR, Pizzi, A. (2013). Improving UF particleboard adhesives water resistance by small albumin and sunflower oil additions. European Journal of Wood and Wood Products, 71(2), 277–279.
  • Nath F, Kimanzi RJ, Mokhtari M, Salehi S. (2018). A novel method to investigate cement-casing bonding using digital image correlation. Journal of Petroleum Science and Engineering, Elsevier, 166, 482–489.
  • Nemli G. (2003). Effects of Some Manufacturing Factors on the Properties of Particleboard Manufactured from Alder (Alnus glutinosa subsp. Barbata), Turk J Agric For 27: 99-104.
  • Nowak M, Maj M. (2018). Determination of coupled mechanical and thermal fields using 2D digital image correlation and infrared thermography: Numerical procedures and results. Archives of Civil and Mechanical Engineering, Elsevier, 18(2), 630–644.
  • Pan B, Qian K, Xie H, Asundi A. (2009). Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Measurement Science and Technology, IOP Publishing, 20(6), 062001.
  • Skarżyński Ł, Suchorzewski, J. (2018). Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography. Construction and Building Materials, 183, 283–299.
  • Sözen E, Bardak T, Peker H, Bardak S. (2017). Apriori Algoritması Kullanılarak Mobilya Seçimde Etkili Olan Faktörlerin Analizi. İleri Teknoloji Bilimleri Dergisi, 6(3), 679–684.
  • TS EN 317 (1999). Su içersine daldırma işleminden sonra kalınlığına şişme tayini, Yonga levhalar ve Lif Levhalar, Ankara. Nisan 1999. TS EN 323 (1999). Birim ağırlığının tayini, Ahşap Esaslı Levhalar, Ankara. Nisan 1999
  • TS EN 326-1 (1999). Ahşap esaslı levhalar-Numune alma kesme ve muayene, Ankara. Nisan 1999.
  • Vora SR, Bognet B, Patanwala HS, Young CD, Chang SY, Daux V, Ma AWK. (2018). Global strain field mapping of a particle-laden interface using digital image correlation. Journal of Colloid and Interface Science, Academic Press, 509, 94–101.
  • Zhao X, Wen Y, Zhao J, Zhao D. (2018). Study of the quality of wood texture patterns in digital image correlation. Optik, Urban & Fischer, 171, 370–376.
  • Zor M, Sozen E, Bardak T. (2016). Lamine Ahşap Malzemenin Mekanik Performansları ve Görüntü Analizi Yöntemiyle Eğilme Direnci Testinde Deformasyonun Belirlenmesi. Journal of Bartin Faculty of Forestry, 18(2), 126-136.
There are 25 citations in total.

Details

Primary Language Turkish
Journal Section Biomaterial Engineering, Bio-based Materials, Wood Science
Authors

Timuçin Bardak 0000-0002-1403-1049

Eser Sözen 0000-0003-4798-7124

Publication Date December 15, 2018
Published in Issue Year 2018 Volume: 20 Issue: 3

Cite

APA Bardak, T., & Sözen, E. (2018). Yonga Levha ve Lif Levhaların Su Alma Davranışlarının Dijital Görüntü Korelasyon (DGK) Yöntemi ile Karakterize Edilmesi. Bartın Orman Fakültesi Dergisi, 20(3), 525-534.


Bartin Orman Fakultesi Dergisi Editorship,

Bartin University, Faculty of Forestry, Dean Floor No:106, Agdaci District, 74100 Bartin-Turkey.

Fax: +90 (378) 223 5077, Fax: +90 (378) 223 5062,

E-mail: bofdergi@gmail.com