Research Article

Being an Mechanical Engineering Student During the Pandemic Process

Volume: 5 Number: 1 June 30, 2021
EN TR

Being an Mechanical Engineering Student During the Pandemic Process

Abstract

In this study, it was conducted to investigate the problems, expectations, wishes and expectations of İzmir Democracy University Faculty of Engineering, Mechanical Engineering students during the pandemic period. Engineering Faculty students are expected to be depressed and unexpected during the pandemic, but on the contrary, it has been determined that the majority of them have spent this process very efficiently. The study was carried out with the consent of the students, by obtaining one-to-one opinions. Most students have improved themselves in engineering drawing techniques and artistic activities, especially in foreign languages, by taking online training during the pandemic. Keeping records in online education has given the chance to watch and follow the lessons again and again. However, the importance of face-to-face education was also emphasized by the students. The results obtained were evaluated and examined in detail, and our opinions and suggestions were presented.

Keywords

Thanks

Yapılan çalışma esnasında görüşleri ve önerileri alınan İzmir Demokrasi Üniversitesi, Mühendislik Fakültesi- Makine Mühendisliği ikinci ve üçüncü sınıf öğrencilerine, ayrıca bu kapsamda online teknik gezilerin gerçekleşmesini sağlayan Sayın M. Burak Cömert Bey’e ve Kaan Havalı Kırcı Makine Oto Yedek Parça İmalat ve Sanayi LTD. ŞTI şirketine teşekkür ederiz.

References

  1. [1] S. ADIGÜZEL ,” COVİD 19 SONRASINDA HAVAYOLU - AFTER COVİD 19. AIR TRANSPORTATION”, Al Farabi Uluslararası Sosyal Bilimler Dergisi, Cilt 5, Sayı 3, pp. 65 – 76, 2020.
  2. [2] F. Aydemir, “IoT Based Indoor Disinfection Coordinating System Against the New Coronavirus” International Scientific and Vocational Studies Journal, vol 4, no 2, pp. 81 – 85, 2020.
  3. [3] T. ARTAN , M. KARAMAN , İ̇. ARSLAN , F. CEBECİ , “COVID-19 Salgınına Yönelik Algı ve Tutumları Değerlendirme Ölçeği'nin Değerlendirilmesi”, Sosyal Çalışma Dergisi, Cilt 4, Sayı 2, pp. 101 – 107, 2020.
  4. [4] Z. ÖZALP , “Covid-19 Bağlamında Devletlerin Hak ve Sorumlulukları”, Sosyal Bilimler Araştırma Dergisi, Cilt 9, Sayı 2, pp.127 – 132, 2020.
  5. [5] T. KÖSE , Ş. AĞDENİZ , “ENTEGRE RAPORLAMADA COVID-19 SALGININA İLİŞKİN VERİLERİN ANALİZİ”, Muhasebe ve Vergi Uygulamaları Dergisi, Cilt 14, Sayı 1, pp. 189 – 220, 2021.
  6. [6] A.S. TAŞ , B. KÖKTÜRK DALCALI , “Covid-19 Pandemisi Döneminde Hemşirelik Öğrencilerinde Mesleki Güdülenme”, Acıbadem Üniversitesi Sağlık Bilimleri Dergisi, Cilt 12, Sayı 2, 2021
  7. [7] I. BEZİRCİOGLU , G. DİNÇ HORASAN , Y. SEVAL-ÇELİK , G. GÜNER AKDOĞAN , M. HAYRAN , S. İNAN , İ. ŞEMİN , B. Emre DAYANÇ , A.B. DEMİR , Y.H. ABACIOĞLU ,Tıp Eğitiminde COVID-19 Pandemi Etkisi: "İzmir Ekonomi Üniversitesi Tıp Fakültesi Deneyimi", Tıp Eğitimi Dünyası, Cilt 20, Sayı 60-1, pp. 102 – 108, 2021.
  8. [8] Z. Almarzooq, M. Lopes, A. Kochar, “Virtual Learning during the COVID-19 Pandemic: A Disruptive Technology in Graduate Medical Education.” J Am Coll Cardiol, 75(20), pp. 2635–2638, 2020.

Details

Primary Language

Turkish

Subjects

Engineering

Journal Section

Research Article

Publication Date

June 30, 2021

Submission Date

March 26, 2021

Acceptance Date

June 1, 2021

Published in Issue

Year 2021 Volume: 5 Number: 1

APA
Çavdar, U., Çavdar, P., & Yavuz, M. M. (2021). Being an Mechanical Engineering Student During the Pandemic Process. International Scientific and Vocational Studies Journal, 5(1), 86-93. https://izlik.org/JA89CN35ED
AMA
1.Çavdar U, Çavdar P, Yavuz MM. Being an Mechanical Engineering Student During the Pandemic Process. ISVOS. 2021;5(1):86-93. https://izlik.org/JA89CN35ED
Chicago
Çavdar, Uğur, Pınar Çavdar, and Mustafa Murat Yavuz. 2021. “Being an Mechanical Engineering Student During the Pandemic Process”. International Scientific and Vocational Studies Journal 5 (1): 86-93. https://izlik.org/JA89CN35ED.
EndNote
Çavdar U, Çavdar P, Yavuz MM (June 1, 2021) Being an Mechanical Engineering Student During the Pandemic Process. International Scientific and Vocational Studies Journal 5 1 86–93.
IEEE
[1]U. Çavdar, P. Çavdar, and M. M. Yavuz, “Being an Mechanical Engineering Student During the Pandemic Process”, ISVOS, vol. 5, no. 1, pp. 86–93, June 2021, [Online]. Available: https://izlik.org/JA89CN35ED
ISNAD
Çavdar, Uğur - Çavdar, Pınar - Yavuz, Mustafa Murat. “Being an Mechanical Engineering Student During the Pandemic Process”. International Scientific and Vocational Studies Journal 5/1 (June 1, 2021): 86-93. https://izlik.org/JA89CN35ED.
JAMA
1.Çavdar U, Çavdar P, Yavuz MM. Being an Mechanical Engineering Student During the Pandemic Process. ISVOS. 2021;5:86–93.
MLA
Çavdar, Uğur, et al. “Being an Mechanical Engineering Student During the Pandemic Process”. International Scientific and Vocational Studies Journal, vol. 5, no. 1, June 2021, pp. 86-93, https://izlik.org/JA89CN35ED.
Vancouver
1.Uğur Çavdar, Pınar Çavdar, Mustafa Murat Yavuz. Being an Mechanical Engineering Student During the Pandemic Process. ISVOS [Internet]. 2021 Jun. 1;5(1):86-93. Available from: https://izlik.org/JA89CN35ED


Creative Commons Lisansı


Creative Commons Atıf 4.0 It is licensed under an International License