Araştırma Makalesi

Being an Mechanical Engineering Student During the Pandemic Process

Cilt: 5 Sayı: 1 30 Haziran 2021
PDF İndir
EN TR

Being an Mechanical Engineering Student During the Pandemic Process

Öz

In this study, it was conducted to investigate the problems, expectations, wishes and expectations of İzmir Democracy University Faculty of Engineering, Mechanical Engineering students during the pandemic period. Engineering Faculty students are expected to be depressed and unexpected during the pandemic, but on the contrary, it has been determined that the majority of them have spent this process very efficiently. The study was carried out with the consent of the students, by obtaining one-to-one opinions. Most students have improved themselves in engineering drawing techniques and artistic activities, especially in foreign languages, by taking online training during the pandemic. Keeping records in online education has given the chance to watch and follow the lessons again and again. However, the importance of face-to-face education was also emphasized by the students. The results obtained were evaluated and examined in detail, and our opinions and suggestions were presented.

Anahtar Kelimeler

Teşekkür

Yapılan çalışma esnasında görüşleri ve önerileri alınan İzmir Demokrasi Üniversitesi, Mühendislik Fakültesi- Makine Mühendisliği ikinci ve üçüncü sınıf öğrencilerine, ayrıca bu kapsamda online teknik gezilerin gerçekleşmesini sağlayan Sayın M. Burak Cömert Bey’e ve Kaan Havalı Kırcı Makine Oto Yedek Parça İmalat ve Sanayi LTD. ŞTI şirketine teşekkür ederiz.

Kaynakça

  1. [1] S. ADIGÜZEL ,” COVİD 19 SONRASINDA HAVAYOLU - AFTER COVİD 19. AIR TRANSPORTATION”, Al Farabi Uluslararası Sosyal Bilimler Dergisi, Cilt 5, Sayı 3, pp. 65 – 76, 2020.
  2. [2] F. Aydemir, “IoT Based Indoor Disinfection Coordinating System Against the New Coronavirus” International Scientific and Vocational Studies Journal, vol 4, no 2, pp. 81 – 85, 2020.
  3. [3] T. ARTAN , M. KARAMAN , İ̇. ARSLAN , F. CEBECİ , “COVID-19 Salgınına Yönelik Algı ve Tutumları Değerlendirme Ölçeği'nin Değerlendirilmesi”, Sosyal Çalışma Dergisi, Cilt 4, Sayı 2, pp. 101 – 107, 2020.
  4. [4] Z. ÖZALP , “Covid-19 Bağlamında Devletlerin Hak ve Sorumlulukları”, Sosyal Bilimler Araştırma Dergisi, Cilt 9, Sayı 2, pp.127 – 132, 2020.
  5. [5] T. KÖSE , Ş. AĞDENİZ , “ENTEGRE RAPORLAMADA COVID-19 SALGININA İLİŞKİN VERİLERİN ANALİZİ”, Muhasebe ve Vergi Uygulamaları Dergisi, Cilt 14, Sayı 1, pp. 189 – 220, 2021.
  6. [6] A.S. TAŞ , B. KÖKTÜRK DALCALI , “Covid-19 Pandemisi Döneminde Hemşirelik Öğrencilerinde Mesleki Güdülenme”, Acıbadem Üniversitesi Sağlık Bilimleri Dergisi, Cilt 12, Sayı 2, 2021
  7. [7] I. BEZİRCİOGLU , G. DİNÇ HORASAN , Y. SEVAL-ÇELİK , G. GÜNER AKDOĞAN , M. HAYRAN , S. İNAN , İ. ŞEMİN , B. Emre DAYANÇ , A.B. DEMİR , Y.H. ABACIOĞLU ,Tıp Eğitiminde COVID-19 Pandemi Etkisi: "İzmir Ekonomi Üniversitesi Tıp Fakültesi Deneyimi", Tıp Eğitimi Dünyası, Cilt 20, Sayı 60-1, pp. 102 – 108, 2021.
  8. [8] Z. Almarzooq, M. Lopes, A. Kochar, “Virtual Learning during the COVID-19 Pandemic: A Disruptive Technology in Graduate Medical Education.” J Am Coll Cardiol, 75(20), pp. 2635–2638, 2020.

Ayrıntılar

Birincil Dil

Türkçe

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

30 Haziran 2021

Gönderilme Tarihi

26 Mart 2021

Kabul Tarihi

1 Haziran 2021

Yayımlandığı Sayı

Yıl 2021 Cilt: 5 Sayı: 1

Kaynak Göster

APA
Çavdar, U., Çavdar, P., & Yavuz, M. M. (2021). Being an Mechanical Engineering Student During the Pandemic Process. International Scientific and Vocational Studies Journal, 5(1), 86-93. https://izlik.org/JA89CN35ED
AMA
1.Çavdar U, Çavdar P, Yavuz MM. Being an Mechanical Engineering Student During the Pandemic Process. ISVOS. 2021;5(1):86-93. https://izlik.org/JA89CN35ED
Chicago
Çavdar, Uğur, Pınar Çavdar, ve Mustafa Murat Yavuz. 2021. “Being an Mechanical Engineering Student During the Pandemic Process”. International Scientific and Vocational Studies Journal 5 (1): 86-93. https://izlik.org/JA89CN35ED.
EndNote
Çavdar U, Çavdar P, Yavuz MM (01 Haziran 2021) Being an Mechanical Engineering Student During the Pandemic Process. International Scientific and Vocational Studies Journal 5 1 86–93.
IEEE
[1]U. Çavdar, P. Çavdar, ve M. M. Yavuz, “Being an Mechanical Engineering Student During the Pandemic Process”, ISVOS, c. 5, sy 1, ss. 86–93, Haz. 2021, [çevrimiçi]. Erişim adresi: https://izlik.org/JA89CN35ED
ISNAD
Çavdar, Uğur - Çavdar, Pınar - Yavuz, Mustafa Murat. “Being an Mechanical Engineering Student During the Pandemic Process”. International Scientific and Vocational Studies Journal 5/1 (01 Haziran 2021): 86-93. https://izlik.org/JA89CN35ED.
JAMA
1.Çavdar U, Çavdar P, Yavuz MM. Being an Mechanical Engineering Student During the Pandemic Process. ISVOS. 2021;5:86–93.
MLA
Çavdar, Uğur, vd. “Being an Mechanical Engineering Student During the Pandemic Process”. International Scientific and Vocational Studies Journal, c. 5, sy 1, Haziran 2021, ss. 86-93, https://izlik.org/JA89CN35ED.
Vancouver
1.Uğur Çavdar, Pınar Çavdar, Mustafa Murat Yavuz. Being an Mechanical Engineering Student During the Pandemic Process. ISVOS [Internet]. 01 Haziran 2021;5(1):86-93. Erişim adresi: https://izlik.org/JA89CN35ED


Creative Commons License
Creative Commons Atıf 4.0 It is licensed under an International License