Katı Yakıt Atıklarından Renk Pigmenti Elde Edilerek Tekstilde Renklendirici Olarak Kullanılması

Abstract

Bu çalışmada, bertarafı oldukça zor olan katı yakıt atıklarından oluşan küllerden renk pigmentleri elde edilerek, kumaşların bu renk pigmentleriyle renklendirilmesi amaçlanmıştır. Bu amaçla, yaklaşık 45-50 µm boyutuna öğütülüp elenen kül pigmentleriyle kumaşlar baskı yöntemiyle renklendirilmiştir. Renkli kumaşların SEM-EDX, ATR-FTIR analizleri yapılmıştır. Aynı zamanda renkli kumaşlara 5, 10, 15 ve 20 yıkama yapılarak mukavemet, boncuklanma ve aşınma, renk ölçümleri yapılmıştır. 20 yıkama sonunda FITIR-ATR analizinde karbon bağlarının varlığı, SEM-EDX analizinde ise arsenik ve karbon elementlerinin varlığı incelenmiştir. Sonuç olarak, uzaklaştırılması zor olan külün, kumaşların renklendirilmesinde sentetik boyarmaddelere alternatif bir renk pigmenti olarak değerlendirilebileceği öngörülmüştür.

Keywords

• Katı Atık
• Kül
• Renk Pigmenti
• Bertaraf
• Tekstil Boyası

Obtaining Color Pigment from Solid Fuel Waste and Its Application as a Textile Colorant

Abstract

This study explores the extraction of color pigments from solid fuel waste ash, a challenging material to dispose of, and investigates its use in fabric coloration. To achieve this, fabrics were printed using ash-derived pigments, which were finely ground and sieved to a particle size of approximately 45-50 µm. Characterization of the colored fabrics was conducted using SEM-EDX and ATR-FTIR analyses. Additionally, fabric durability was assessed through repeated washing cycles (5, 10, 15, and 20 washes), with evaluations of strength, pilling, abrasion resistance, and color retention. After 20 washes, the presence of carbon bonds in FTIR-ATR analysis and arsenic and carbon elements in SEM-EDX analysis was confirmed. The findings suggest that ash, which is otherwise difficult to dispose of, holds potential as an alternative color pigment to synthetic dyes in fabric coloration.

Keywords

• Solid Waste
• Ash
• Color Pigment
• Waste Disposal
• Textile Dyeing

References

1. Shirvanimoghaddam K, Motamed B, Ramakrishna S, Naebe M. Death by waste: Fashion and textile circular economy case. Science of the Total Environment 2020;718:137317.
2. Kan A. General characteristics of waste management: a review. Energy Educ Sci Technol Part A 2009;23:55-69.
3. Wilson DC, Araba AO, Chinwah K, Cheeseman CR. Building recycling rates through the informal sector. Waste Manage 2009;29:629-635.
4. Demirbas A. Concept of energy conversion in engineering education. Energy Educ Sci Technol Part B 2009;1:183-197.
5. Tatli ZH. Computer based education: online learning and teaching facilities. Energy Educ Sci Technol Part B 2009;1:172-181.
6. Campbell DJV. Waste management needs in developing countries. In: Proceedings of the Sardinia conference; 1993.
7. Environmental Safety Center. Building 7.12, AEA Technology. Harwell, Oxfordshire, UK; 1993.
8. Wilson DC, Araba AO, Chinwah K, Cheeseman CR. Building recycling rates through the informal sector. Waste Manage 2009;29:629-635.

9. Siddique R, Khatib J, Kaur I. Use of recycled plastic in concrete: a review. Waste Manage 2008;28:1835-1852.
10. Singh D, Yadav VK, Ali D, Soni S, Kumar G, Dawane V, et al. Isolation and Characterization of Siderophores Producing Chemolithotrophic Bacteria from the Coal Samples of the Aluminum Industry. Geomicrobiol J 2022:1-7.
11. Xiahou Q, Springer CH, Mendelsohn R. The effect of foreign investment on Asian coal power plants. Energy Econ 2022;105:105752.
12. Nazar R, Srinivasan SL, Kanudia A, Asundi J. Implication of emission regulation on cost and tariffs of coal-based power plants in India: A system modelling approach. Energy Policy 2021;148:111924.
13. Edianto A, Trencher G, Matsubae K. Why do some countries receive more international financing for coal-fired power plants than renewables? Influencing factors in 23 countries. Energy Sustain Dev 2022;66:177-188.
14. Marinina O, Nevskaya M, Jonek-Kowalska I, Wolniak R, Marinin M. Recycling of coal fly ash as an example of an efficient circular economy: A stakeholder approach. Energies 2021;14:3597.
15. Adeleye BN, Osabohien R, Lawal AI, de Alwis T. Energy use and the role of per capita income on carbon emissions in African countries. PLoS ONE 2021;16:e259488.
16. Marinina O, Nevskaya M, Jonek-Kowalska I, Wolniak R, Marinin M. Recycling of coal fly ash as an example of an efficient circular economy: A stakeholder approach. Energies 2021;14:3597.
17. Asokan P, Saxena M, Asolekar SR. Coal combustion residues—environmental implications and recycling potentials. Resour Conserv Recycl 2005;43(3):239-262.
18. EGAT. Personal communication with Mae Moh Power Plant, Thailand. Discussion notes with Mae Moh Authority during site visit made on 23–24 September 2011; 2010.
19. Asokan P, Saxena M, Asolekar SR. Coal combustion residues—environmental implications and recycling potentials. Resour Conserv Recycl 2005;43(3):239-262.
20. Kizgut S, Cuhadaroglu D, Samanli S. Stirred grinding of coal bottom ash to be evaluated as a cement additive. Energy Source Part A 2010;32(16):1529-1539.
21. Wang S, Boyjoo Y, Choueib A, Zhu ZH. Removal of dyes from aqueous solution using fly ash and red mud. Water Res 2005;39(1):129-138.
22. Hui KS, Chao CYH. Pure, single phase, high crystalline, chamfered-edge zeolite 4A synthesized from coal fly ash for use as a builder in detergents. J Hazard Mater 2006;137(1):401-409.
23. Levandowski J, Kalkreuth W. Chemical and petrographical characterization of feed coal, fly ash and bottom ash from the Figueira Power Plant, Parana, Brazil. Int J Coal Geol 2009;77(3-4):269-281.
24. Wang S, Boyjoo Y, Choueib A, Zhu ZH. Removal of dyes from aqueous solution using fly ash and red mud. Water Res 2005;39(1):129-138.
25. Kizgut S, Cuhadaroglu D, Samanli S. Stirred grinding of coal bottom ash to be evaluated as a cement additive. Energy Source Part A 2010;32(16):1529-1539.
26. Jamwal N. Is it all grey. Down Earth 2003;6:38-41.
27. Garg RN, Pathak H, Das DK, et al. Use of flyash and biogas slurry for improving wheat yield and physical properties of soil. Environ Monit Assess 2005;107:1-9.
28. Ilic M, et al. Mineralogy and microstructure of sintered lignite coal fly ash. Fuel 2003.
29. Cho H, et al. A study on removal characteristics of heavy metals from aqueous solution by fly ash. J Hazard Mater B 2005.
30. Hansen Y, Notten PJ, Petrie JG. The environmental impact of ash management in coal-based power generation. Appl Geochem 2002;17(8):1131-1141.
31. Shurkian O, Amirbayat J, Gong RH. Effect of repeated laundering and crease-resistant treatment on fabric properties. Journal of the Textile Machinery Society of Japan 2002;55(4):39-42.
32. Gürarda A. Konfeksiyon sanayiinde Lcyra'lı® kumaşların dikiş problemlerinin incelenmesi [PhD thesis]. Bursa: Uludağ Üniversitesi; 2005.
33. Şekerden F. Pes/Vis/Lycra içerikli atkı elastan dokumalarda çeşitli dokuma faktörlerinin kumaşın fiziksel ve mekanik özelliklerine etkisinin incelenmesi [PhD thesis]. Adana: Çukurova Üniversitesi; 2009.
34. Babaoğul M, Şener A, Öztop H. Tekstil Lifleri Temel Özellikler, Kullanım ve Bakım. Ankara: ÖzBaran Ofset; 2010.
35. Harmancıoğlu M, Yazıcıoğlu G. Bitkisel Lifler. İzmir: Ege Üniversitesi Tekstil Fakültesi Yayınları; 1979.
36. Basyigit ZO, Kut D, Hauser P. Development of multifunctional cotton fabric via chemical foam application method. Textile Research Journal 2020;90(9-10):991-1001.
37. Etim RK, Attah IC, Ekpo DU, Usanga IN. Evaluation on stabilization role of lime and cement in expansive black clay-oyster shell ash composite. Transportation Infrastructure Geotechnology 2021. doi:10.1007/s40515-021-00196-1.
38. Kechouane Z, Nechnech A. Characterization of an expansive clay treated with lime: Effect of compaction on the swelling pressure. In: 4th International Congress in Advances in Applied Physics and Materials Science (APMAS 2014); 2015, p. 020057-1-020057-8. doi:10.1063/1.4914248.
39. Buchwald H, Zellmann HD, Kaps C. Condensation of aluminosilicate gels - model system for geopolymer binders. J Non-Cryst Solid 2011;357:1376-1382.
40. Zviagina BB, Drits VA, Dorzhieva OV. Distinguishing features and identification criteria for K-dioctahedral 1M micas (Illite-aluminoceladonite and illite-glauconite-celadonite series) from middleinfrared spectroscopy data. Minerals 2020;10(2). doi:10.3390/min10020153.
41. Aliyari E, Alvand M, Shemirani F. Modified surface-active ionic liquid-coated magnetic graphene oxide as a new magnetic solid phase extraction sorbent for preconcentration of trace nickel. RSC Adv 2016;6(69):64193-64202. doi:10.1039/c6ra04163a.
42. Budak A, Gönen M. Extraction of boric acid from colemanite mineral by supercritical carbon dioxide. J Supercrit Fluids 2014;92:183-189. doi:10.1016/j.supflu.2014.05.016.
43. Saafan SA, El-Nimr MK, Hussein MM, Omar MK. FTIR, DC, and AC electrical measurements of Mg Zn Nano-ferrites and their composites with Polybenzoxazine. Appl Phys A 2021;127:800.
44. Bandipally S. Characterization of Lime-Treated Soils for Assessing Short-Term Strength Behavior [Master's thesis]. Indian Institute of Technology Madras; 2017.
45. Atrak K, Ramazani A, Taghavi Fardood S. Green synthesis of amorphous and gamma aluminum oxide nanoparticles by tragacanth gel and comparison of their photocatalytic activity for the degradation of organic dyes. J Mater Sci Mater Electron 2018;29:8347-8353.
46. Ugur SS, Sarıışık M, Aktas AH. Nano-Al2O3 multilayer film deposition on cotton fabrics by layer-by-layer deposition method.
47. Etim RK, Attah IC, Ekpo DU, Usanga IN. Evaluation on stabilization role of lime and cement in expansive black clay-oyster shell ash composite. Transportation Infrastructure Geotechnology 2021. doi:10.1007/s40515-021-00196-1.
48. Bilgiç C, Bilgiç Ş. Application of Fourier Transform Infrared (FTIR) spectroscopy to analysis of clays. Nevşehir Bilim ve Teknoloji Dergisi 2018;8(IMSMATEC Özel Sayı):37-46. doi:10.17100/nevbiltek.632788.
49. Liu ZL, Wang X, Yao KL, Du GH, Lu QH, Ding ZH, et al. Synthesis of magnetite nanoparticles in W/O microemulsion. J Mater Sci 2004;39:2633.
50. Qiu G, Wang Q, Wang C, Lau W, Guo Y. Polystyrene/Fe3O4 magnetic emulsion and nanocomposite prepared by ultrasonically initiated miniemulsion polymerization. Ultrason Sonochem 2007;14:55.
51. Mitra S, Das S, Mandal K, Chaudhuri S. Synthesis of a alpha-Fe2O3 nanocrystal in its different morphological attributes: growth mechanism, optical and magnetic properties. Nanotechnology 2007;18:275608.
52. Bach LG, Md Islam R, Kim TJ, Seo S, Lim KT. Encapsulation of Fe3O4 magnetic nanoparticles with poly(methyl methacrylate) via surface functionalized thiol-lactam initiated radical polymerization. Appl Surf Sci 258:2959.
53. Alvarado-Cervantes R, Felipe-Riverón EM, Khartchenko V, Pogrebnyak O. A Comparative Study of the Use of a Robust Color Image Segmentation Method. In: 2016 Fifteenth Mexican International Conference on Artificial Intelligence (MICAI). IEEE; 2016, p. 41-48.