This study focuses on the design of a twin-rotor aerodynamic system and the development of a control structure aimed at achieving stable position control in the pitch and yaw axes. The system is driven by Brushless Direct Current (BLDC) motors, where the pitch axis is controlled using an MPU6050 Inertial Measurement Unit (IMU) sensor, and the yaw axis is controlled using an incremental rotary encoder. The data obtained from the IMU were filtered and converted into angular position information, while the encoder signals were processed through an interrupt-based structure to calculate angular displacement. The control algorithm was executed in real time, and PWM signals were utilized to command the motors. The Proportional, Integral, Derivative (PID) parameters were tuned using the Ziegler–Nichols method, enabling the system to exhibit a fast, stable, and low-overshoot position response in both axes. The developed control structure was designed to be tested and modeled under conditions similar to those of real-world drone, fixed-wing, and rotary-wing unmanned aerial vehicle (UAV) systems. In this context, the use of an IMU sensor not only allowed the system to be evaluated in an aerodynamically realistic scenario but also contributed to the literature on sensor-based control systems. Experimental analyses conducted with a 10 ms sampling period demonstrated that the designed system could maintain stability under both static and dynamic conditions and is resistant to external disturbances. Furthermore, a comparative performance analysis between the IMU- and encoder-based measurement systems was carried out.
BLDC motor twin rotor system encoder real-time control IMU sensor.
Bu çalışma, çift rotorlu aerodinamik bir sistemin tasarımını ve sistemin yunuslama (pitch) ile yalpalama (yaw) eksenlerinde kararlı konum kontrolünün sağlanmasına yönelik kontrol yapısının geliştirilmesini konu almaktadır. Fırçasız Doğru Akım (FDA) motorlarla tahrik edilen sistemde, pitch ekseninin kontrolü için MPU6050 Ataletsel Ölçüm Birimi (Inertial Measurement Unit, IMU) sensörü, yaw ekseninin kontrolü için ise artımsal döner (rotary) enkoder kullanılmıştır. IMU sensöründen elde edilen veriler filtrelenerek açısal konum bilgisine dönüştürülmüş, enkoder verileri ise kesme yapısı üzerinden işlenerek açı hesaplanmıştır. Kontrol algoritması gerçek zamanlı olarak çalıştırılmış ve motorlara darbe genişlik modülasyonu (Pulse Width Modulation, PWM) sinyalleri aracılığıyla komutlar uygulanmıştır. Kontrol yapısında yer alan oransal, integral ve türev (Proportional, Integral, Derivative, PID) parametreleri Ziegler–Nichols yöntemi ile ayarlanmış ve sistemin her iki eksende de hızlı, kararlı ve düşük aşma oranına sahip bir konum tepkisi sergilemesi sağlanmıştır. Geliştirilen kontrol yapısı, gerçek dünyadaki drone, sabit kanatlı ve döner kanatlı insansız hava aracı (İHA) sistemlerine benzer koşullarda test edilip modellenebilmesi amacıyla tasarlanmıştır. Bu kapsamda IMU sensörünün kullanımı, sistemin aerodinamik açıdan gerçek uygulamalara yakın bir senaryoda değerlendirilmesini sağlamış ve sensör tabanlı kontrol sistemleri alanındaki çalışmalara katkı sunmuştur. 10 ms örnekleme süresiyle yürütülen deneysel analizler, tasarlanan sistemin statik ve dinamik koşullarda kararlılığını koruyabildiğini ve dışsal bozuculara karşı dirençli olduğunu göstermiştir. Ayrıca, IMU ve enkoder tabanlı ölçüm sistemlerinin karşılaştırmalı performans analizi gerçekleştirilmiştir.
FDA motor çift rotorlu sistem enkoder gerçek zamanlı kontrol IMU sensörü.
| Birincil Dil | Türkçe |
|---|---|
| Konular | Kontrol Mühendisliği, Mekatronik Mühendisliği |
| Bölüm | Araştırma Makalesi |
| Yazarlar | |
| Gönderilme Tarihi | 27 Ekim 2025 |
| Kabul Tarihi | 6 Şubat 2026 |
| Yayımlanma Tarihi | 29 Mart 2026 |
| DOI | https://doi.org/10.35234/fumbd.1810179 |
| IZ | https://izlik.org/JA47YK47BJ |
| Yayımlandığı Sayı | Yıl 2026 Cilt: 38 Sayı: 1 |