Hibrid teknolojili adaptif cepheler için yeni bir sınıflandırma önerisi

Abstract

Çalışmada, aktif adaptif cephe sistemlerine akıllı malzemelerin entegrasyonuyla elde edilen hibrid teknolojili adaptif cephelerin okunaklılığını artırmak ve karakterizasyonu için bir sınıflandırma yaklaşımı önerilmektedir. Bu bağlamda öncelikle sınıflandırma çalışmaları, adaptif eleman prototipleri ve uygulamaları incelenmiştir. Ardından sınıflandırma yaklaşımı akıllı malzeme özellikleri, sistem özellikleri ve amaçlar olmak üzere kategorize edilmiştir. Amaçların akıllı malzeme ve sistem özelliklerine bağlı olarak gelişip çeşitleneceği öngörülmüştür. Bu öngörüye dayanarak amaçların kesişimde konumlandırıldığı bir sınıflandırma diyagramı geliştirilmiştir. Bu diyagramda akıllı malzeme ve sistem özellikleri amaçlara doğru yönlenerek birleşmektedir. Gelecek yıllarda keşfedilecek yeni malzeme ve sistem özelliklerinin diyagrama eklenmesi kritik önem taşımaktadır. Bu sebeple diyagramda, her bir kategori merkezden dışa doğru ışınsal biçimde gelişen hücrelerden oluşturulmuştur. Değerlendirmede örnek çalışmalar analiz edilerek karakteristiklerin kullanım yoğunluğu belirlenmiştir. Bu durum diyagram aracılığıyla da görselleştirilmiştir. Sonuç olarak, öne çıkan karakteristikler sayesinde adaptif cephelerin okunaklılığı artmış ve karakterizasyonu kolaylaşmıştır.

Keywords

• adaptif cephe
• sınıflandırma önerisi
• akıllı malzeme
• akıllı sistem
• hibrid teknoloji

A new classification proposal for adaptive façades with hybrid technology

Abstract

In the study, a classification approach is proposed to characterize and increase the legibility of the adaptive facades with hybrid technology that can be obtained by integrating smart materials into active adaptive facade systems. In this context, firstly, classification studies, adaptive element prototypes and applications were examined. Then, the classification approach was categorized as smart material properties, smart system properties and purposes. It was predicted that the purposes will develop and diversify depending on the properties of smart materials and systems. Based on this prediction, a classification diagram was developed in which the purposes are located at the intersection. In this diagram, smart material and system properties are combined by orienting towards the purposes. It is critical that new material and system properties that will be discovered in the coming years be added to the diagram. Therefore, in the diagram, each category was composed of cells that develop radially from the center outwards. In the evaluation, case studies were analyzed and the usage intensity of the characteristics was determined. This situation was also visualized through the diagram. As a result, the legibility of adaptive facades has increased and its characterization has become easier, thanks to the prominent characteristics.

Keywords

• adaptive facade
• classification proposal
• smart material
• smart system
• hybrid technology

References

1. Addington, D. M., & Schodek, D. L. (2005). Smart materials and technologies in architecture. Elsevier, Architectural Press.
2. Aelenei, D., Aelenei, L., & Vieira, C. P. (2016). Adaptive Façade: Concept, Applications, Research Questions. Proceedings of the 4th International Conference on Solar Heating and Cooling for Buildings and Industry (SHC 2015), 91, 269–275. doi: 10.1016/j.egypro.2016.06.218
3. Air Flow(er) (2018). Retrieved 06 March 2023 from https://transmaterial.net/air-flower/
4. Altın, M., & Orhon, A. V. (2014). Akıllı yapı cepheleri ve sürdürülebilirlik. 7. Ulusal Çatı & Cephe Sempozyumu Bildiriler Kitabı, Beşiktaş, İstanbul, 3-4 April 2014, 159-167.
5. Altın, M. & Orhon, A. V. (2016). Enerji korunumunda adaptif/uyarlı cepheler. 8. Ulusal Çatı & Cephe Sempozyumu, Mimar Sinan Güzel Sanatlar Üniversitesi, Fındıklı, İstanbul, 2-3 June 2016.
6. Anshuman, S. (n.d). Pixel skin. Retrieved 22 December 2023 from http://beyond.iaac.net/exhibition/
7. Arup (n.d). GreenPix Zero Energy Media Wall, Beijing. Retrieved 12 October 2023 from https://www.arup.com/projects/greenpix-zero-energy-media-wall
8. Attia, S., Bilir, S., Safy, T., Struck, C., Loonen, R., & Goia, F. (2018). Current Trends and Future Challenges in the Performance Assessment of Adaptive Façade Systems, Energy and Buildings, 179, 165-182. doi: 10.1016/j.enbuild.2018.09.017

9. Böke, J., Knaack, U., & Hemmerling, M. (2020). Automated adaptive façade functions in practice - Case studies on office buildings, Automation in Construction, 113. doi: 10.1016/j.autcon.2020.103113
10. Böke, J., Denz, P. R., Suwannapruk, N., & Vongsingha, P. (2022). Active, passive and cyber-physical adaptive façade strategies: a comparative analysis through case studies. Journal of Facade Design and Engineering, 10(2), Special issue, 1–18. doi: 10.47982/jfde.2022.powerskin.01
11. Carl, T., Schein, M., & Stepper, F. (2017). Sun shades about designing adaptable solar facades. Generative Design 1, 2, 165-174.
12. Decker, M. (2013). Emergent futures: Nanotechnology and emergent materials in architecture. BTES Conference 2013-Tectonics of teaching, 1-7.
13. Decker, M., & Zarzycki, A. (2014). Designing resilient buildings with emergent materials. Education and Research in Computer Aided Architectural Design in Europe (eCAADe), 179-184.
14. DOSU Studio Architecture (2011). Bloom. Retrieved 29 December 2023 from https://www.dosu-arch.com/bloom
15. Dyson, A., Gindlesparger, M., Stark, P., Vollen, J., Novelli, N., Phillips, K., Aly, M., Andow, B., & Kiyono, S. (2015). High Efficiency Solar Energy Systems. Retrieved 06 October 2023 from https://www.case.rpi.edu/research/icsolar
16. Etherington, R. (2008). Greenpix media wall by Simone Giostra & Partners. Retrieved 12 October 2023 from https://www.dezeen.com/2008/05/07/greenpix-media-wall-by-simone-giostra-partners/
17. Frearson, A. (2014). UNStudio’s dynamic facade will control indoor climate for Seoul tower. Retrieved 06 October 2023 from https://www.dezeen.com/2014/04/30/hanwha-hq-seoul-unstudio-dynamic-facade/
18. Gonzalez, N. (2015). Self-adaptive membrane_A passive kinetic system. Retrieved 06 October 2023 from https://www.iaacblog.com/programs/self-adaptive-membrane-_-a-passive-kinetic-system/
19. Harrouk, C. (2020). UNStudio Completes Remodeling Works of the Hanwha HQ in Seoul. Retrieved 06 October 2023 from https://www.archdaily.com/938302/unstudio-completes-remodeling-works-of-the-hanwha-hq-in-seoul
20. Herzog, T., Krippner, R., & Lang, W. (2004). Façade construction manual. Birkhauser-Publishers for Architecture.
21. Hraska, J. (2018). Adaptive solar shading of buildings. International Review of Applied Sciences and Engineering, 9(2), 107–113.
22. Karakoç, E., & Çağdaş, G. (2021). Adaptive architecture based on environmental performance: an advanced intelligent façade (AIF) module. Gazi University Journal of Science, 34(3), 630–650. doi:10.35378/gujs.725902
23. Kennedy & Violich Architecture (2013). Soft House. Retrieved 06 July 2023 from https://architizer.com/projects/soft-house/
24. Khoo, C. K., Burry, J., & Burry, M. (2011). Soft responsive kinetic system: an elastic transformable architectural skin for climatic and visual control. ACADIA 2011 Proceedings, 334-341.
25. Lift Architects (n.d.). The Air Flow(er). Retrieved 06 May 2023 from http://www.liftarchitects.com/#/air-flower
26. Li, V., Quixk, M., & Funck, M. (2016). Tub prototypes-shape memory alloy shading, material prototype using shape memory alloys. Retrieved 10 April 2023 from https://tactile-architecture.com/makematerial- city-shading-device/
27. Loonen, R. C. G. M. (2010). Overview of 100 climate adaptive building shells (Master’s thesis). Building services, Architecture, building & planning, Eindhoven university of technology, Eindhoven, Holland.
28. Loonen, R. C. G. M., Trčka, M., Cóstola, D., & Hensen, J. L. M. (2013). Climate adaptive building shells: State-of-the-art and future challenges. Renewable and Sustainable Energy Reviews, 25, 483–493. doi: 10.1016/j.rser.2013.04.016
29. Loonen, R. C. G. M., Rico-Martinez, J. M., Favoino, F., Brzezicki, M., Menezo, C., La Ferla, G., & Aelenei, L. (2015). Design for façade adaptability: Towards a unified and systematic characterization. In 10th Conference onAdvanced Building Skins, 3-4 November 2015, Bern, Switserland, 1284-1294. Economic Forum.
30. Loonen, R. C. G. M., Favoino, F., Hensen, J. L. M., & Overend, M. (2017). Review of Current Status, Requirements and Opportunities for Building Performance Simulation of Adaptive Facades. Journal of Building Performance Simulation, 10(2), 205–223. doi: 10.1080/19401493.2016.1152303
31. Materiability Research Group (n.d.). Self adaptive membrane. Retrieved 13 March 2024 from https://materiability.com/portfolio/self-adaptive-membrane/
32. Matin, N.H., & Eydgahi, A. (2019). Technologies used in responsive facade systems: a comparative study. Intelligent Buildings International, 1–20. doi: 10.1080/17508975.2019.1577213
33. Nady, R. (2017). Dynamic Facades Environmental Control Systems for Sustainable Design. Renewable Energy and Sustainable Development (RESD), 3(1), 118-127. doi: 10.21622/RESD.2017.03.1.118
34. Nagy, Z., Svetozarevic, B., Jayathissa, P., Begle, M., Hofer, J., Lydon, G., Willmann, A., & Schlueter, A. (2016). The adaptive solar facade: From concept to prototypes. Frontiers of Architectural Research, 5, 143-156. doi: 10.1016/j.foar.2016.03.002
35. Orhon, A. V. (2016a). Adaptive building shells. In R. Efe, L. Matchavariani, A. Yaldır, & L. Lévai (Eds.). Developments in Science and Engineering. St. Kliment Ohridski University Press.
36. Orhon, A. V. (2016b). A Review on adaptive photovoltaic facades. Solar Conference & Exhibition, İstanbul, Turkey, 6-8 December 2016, 463-470.
37. Pask, G. 1969. The Architectural Relevance of Cybernetics. Architectural Design, September issue, 7(6), John Wiley & Sons Ltd, London, 68–77.
38. PixelSkin01 (2008). Smart facade for dynamic light transmittance and information display. Retrieved 06 February 2024 from https://transmaterial.net/pixelskin01/
39. PixelSkin02 (2009). Retrieved 22 April 2024 from https://transmaterial.net/pixelskin02/
40. Raznick, D., Hanson, A., & Brenny, C. (n.d). Adaptive Solar Skin. Retrieved 02 March 2024 from https://danielraznick.com/about/adaptive-solar-skin/
41. Rosenfield, K. (2012). TEDx: Metal that breathes / Doris Kim Sung. Retrieved 06 December 2023 from https://www.archdaily.com/293386/tedx-metal-that-breathes-doriskim-sung
42. Scıuto, S. (1998). Solar Control: An Integrated Approach to Solar Control Techniques. Renewable Energy, 15, 368–376.
43. Sherbini, K., & Krawczyk. R. (2004). Overview of Intelligent Architecture. 1st ASCAAD International Conference, The proceedings of e-design in architecture, Dhahran, Saudi Arabia, 137-152.
44. Sung, D., Ramirez, A., Phillips, L., Michalski, J., Xu, W., Kang, J., East, M., & Ho, E. (2018). InVert Auto-Shading windows. Retrieved 12 December 2023 from https://www.dosu-arch.com/invert.
45. Svetozarevic, B., Hofer, J., Nagy, Z., & Chatzi, E. (2016). SoRo-Track: A two-axis soft robotic platform for solar tracking and building - integrated photovoltaic applications. IEEE International Conference on Robotics and Automation (ICRA), 4945-4950. doi: 10.1109/ICRA.2016.7487700
46. Svetozarevic, B., Begle, M., Jayathissa, P., Caranovic, S., Shepherd, R. F., Nagy, Z., Hischier, I., Hofer, J., & Schlueter, A. (2019). Dynamic photovoltaic building envelopes for adaptive energy and comfort management. Nature Energy, 4, 671-682. doi: 10.1038/s41560-019-0424-0
47. Tashakori, M. (2014). Design of a computer controlled sun-tracking façade model (Master’s thesis). The Pennsylvania state university, The graduate school college of arts and architecture, Pennsylvania, ABD.
48. TBM Designs (2020). InVertTM Technology. Retrieved 12 January 2024 from https://www.tbm-designs.com.
49. UNStudio (n.d). Hanwha Headquarters Remodelling. Retrieved 06 November 2023 from https://www.unstudio.com/en/page/11994/hanwha-headquarters-remodelling
50. Xululabs LLC. (2012). Bloom. Retrieved 29 January 2023 from https://www.architectmagazine.com/project-gallery/bloom
51. Voigt, M. P., Roth, D., & Kreimeyer, M. (2022). Main characteristics of adaptive façades. International Design Conference-Design 2022, Proceedings of the Design Society, 2543-2552. doi: 10.1017/pds.2022.257
52. Voigt, M. P., Roth, D., & Kreimeyer, M. (2023) Systematic Classification of Adaptive Façades – Preparing a Database, Proceedings of the International Conference on Engineering Design (ICED23), Bordeaux, France, 24-28 July 2023. doi: 10.1017/pds.2023.330
53. Yoon, J. (2018). Climate-adaptive facade design with smart materials: Evaluation and strategies of thermo-responsive smart material applications for building skins in Seoul. PLEA 2018 HONG KONG Smart and Healthy within the 2-Degree Limit, 620–626.
54. Yoon, J. (2019). SMP prototype design and fabrication for thermoresponsive façade elements. Journal of Facade Design and Engineering, 7(1), 41–61. doi: 10.7480/jfde.2019.1.2662
55. Yoon, J., & Bae, S. (2020). Performance evaluation and design of thermoresponsive SMP shading prototypes. Sustainability (Switzerland), 12(11), 1–35. doi: 10.3390/su12114391