Publication Frequency
The Journal publishes 4 issues per year without special subject volumes.

Reviewing Process
International Journal of Automotive Engineering and Technologies uses Duble-Blind Reviewing process. This means that the reviewer identities are concealed from the authors throughout the review process. Reviewers will not be influenced by the authors because reviewer anonymity allows for impartial decisions.

PREPERATION
Main sections and subsections should be numbered consecutively. All of the references given at the end of the paper that listed consecutively should be cited in the main text with numerals in a square bracket [1, 2-4].
The paper is divided into three parts. The first part includes the title, author’s name, abstract, and keywords. The second part is the main body of the paper that includes the references and nomenclature. The third part is the author’s profile.
Sections must also be edited in double column. Tables and figures should be located at the top or bottom of the columns if possible. Tables should be prepared in font 10. If any table of figure is large than one column, figure or table can be located at the bottom or top of the page with one column. Figures must have at least 300 dpi resolution. Black and white or colored figures are acceptable. Each table and figure should be cited in the text.
Authors must declare that there is no conflict of interest in the study.
Authors should fill the "Acknowledgement" section to thank their funders.
Authors must present CRediT taxonomy (Contributor Roles Taxonomy [https://onlinelibrary.wiley.com/doi/full/10.1002/leap.1210]) when there are two or more authors.
The corresponding author is expected to present CRediT details that provide the opportunity to share an accurate and detailed description of the authors' contributions to the published article.
The role(s) of all authors must be listed, using 14 relevant categories in CRediT taxonomy.
Authors may have contributed in multiple roles.
This information must be provided after the authors' short bios.
The roles of authors may be classified as the followings, but not limited to:
Conceptualization: Ideas; formulation or evolution of overarching research goals and aims.
Data curation: Management activities to annotate (produce metadata), scrub data and maintain research data (including software code, where it is necessary for interpreting the data itself) for initial use and later re-use.
Formal analysis: Application of statistical, mathematical, computational, or other formal techniques to analyze or synthesize study data.
Funding acquisition: Acquisition of the financial support for the project leading to this publication.
Investigation: Conducting a research and investigation process, specifically performing the experiments, or data/evidence collection.
Methodology:Development or design of methodology; creation of models.
Project administration: Management and coordination responsibility for the research activity planning and execution.
Resources: Provision of study materials, reagents, materials, patients, laboratory samples, animals, instrumentation, computing resources, or other analysis tools.
Software: Programming, software development; designing computer programs; implementation of the computer code and supporting algorithms; testing of existing code components.
Supervision: Oversight and leadership responsibility for the research activity planning and execution, including mentorship external to the core team.
Validation: Verification, whether as a part of the activity or separate, of the overall replication/reproducibility of results/experiments and other research outputs.
Visualization: Preparation, creation and/or presentation of the published work, specifically visualization/data presentation.
Writing - original draft : Preparation, creation and/or presentation of the published work, specifically writing the initial draft (including substantive translation).
Writing - review & editing: Preparation, creation and/or presentation of the published work by those from the original research group, specifically critical review, commentary or revision – including pre- or post-publication stages.
The corresponding author may use the following example to state author contributions as authorship credits:
Murat Ciniviz: Conceptualization, Supervision, Bahar Sayın Kul: Conceptualization, Writing-original draft, Validation, Fatih Aydın: Data curation, Formal analysis, Halil Erdi Gülcan: Writing-original draft, writing-review&editing, software.
Source: https://onlinelibrary.wiley.com/doi/full/10.1002/leap.1210


Please follow the instructions below when submitting the article to the journal
Page Setup
The page settings will be as follows:
Margins
Top: 2.5 cm Bottom 2.5 cm
Left: 2.5 cm Right: 2.5 cm
Paper Portrait, A4 size (21 cm x 29.7 cm)
Title of Article
Times New Roman, Font size 14, Center the title
Author(S) Name
Times New Roman, Font size 12, Center the author(s) name
Organization Name and Address
Times New Roman, Font size 9
Abstract
Abstract should be between 200 to 300 words. Times New Roman, Font size 11
Keywords
Key words should consist of at least 3 different keywords. Times New Roman, Font size 9
All Text
Times New Roman, Font size 12, Single Spaced, justify both sides, First Line of all Paragraphs indented, No Line Breaks between Paragraphs, Line Breaks between sections.
Must be a single column
1. Introduction,
2. Literature Review,
3. Materials and Methods,
4. Results and Discussion,
5. Conclusions,
Acknowledgement,
Nomenclature,
CRediT taxonomy
6. References,
References should be listed at the end of the paper in font 12. They should be numbered consecutively and number followed by a dot. While referring a journal paper, volume, number, page numbers and year must be given.
Article(s)
Author(s), “Article Title”, Publication Name, Volume Number, Issue Number, Pages First Page-Last Page, Date of Publication.
1. Ali Kahraman, Murat Ciniviz, İlker Örs, Hidayet Oğuz, “The effect on performance and exhaust emissions of adding cotton oil methyl ester to diesel fuel”, International Journal of Automotive Engineering and Technologies (IJAET, ISSN 2146 - 9067), Volume: 5, Issue: 4, pp: 148-154, 2016.
2. Ulugbek Azimov, Do Hang “Multiparametric engine optimization with application of biodiesel blends for better performance and lower exhaust gas emissions”, International Journal of Automotive Engineering and Technologies (IJAET, ISSN 2146 - 9067), Volume: 7, Issue: 2, pp: 88-98, 2018.
3. Fatih Aydın, Tuğba Şahin “Investigation of Fuel Properties of Canola Oil Biodiesel, Bioethanol and Diesel Fuel Mixture”, International Journal of Automotive Engineering and Technologies (IJAET, ISSN 2146 - 9067), Volume: 7, Issue: 4, pp: 158-163, 2018.
Book(s)
Author(s), “Book Title”, Publisher, Date of Publication of the Book.
Web addresses
https://dergipark.org.tr/tr/pub/ijaet, day/mounth/year
If any table of figure is large than one column, figure or table can be located at the bottom or top of the page with one column. Figures must have at least 300 dpi resolution. Black and white or colored figures are acceptable. Each table and figure should be cited in the text.
Photographs
JPG or GIF format, Inserted immediately after the citation in the text.
Tables
Times New Roman, Font size 8-10 Inserted immediately after the citation in the text
File Format
The article format should be Microsoft word (Please, use format Microsoft word 1997-2003).
File Name
File name must be between two to four words. Use the title of your research paper as the file name. Avoid the words AP, Journal, Manuscript, Paper for AP – IJAET.

Once the Article is Accepted Please follow the instructions below:
Page Setup
The page settings will be as follows:
Margins
Top: 2.5 cm Bottom 2.5 cm
Left: 2.5 cm Right: 2.5 cm
Paper Portrait, A4 size (21 cm x 29.7 cm)
Title of Article
Times New Roman, Font size 14, Center the title
Author(S) Name
Times New Roman, Font size 12, Center the author(s) name
Organization Name and Address
Times New Roman, Font size 9
Abstract
Abstract should be between 200 to 300 words. Times New Roman, Font size 11
Keywords
Key words should consist of at least 3 different keywords. Times New Roman, Font size 9
All Text
Times New Roman, Font size 12, Single Spaced, justify both sides, First Line of all Paragraphs indented, No Line Breaks between Paragraphs, Line Breaks between sections.
In case of 2 columns
Column Width: 7.6 cm
Column Spacing: 0.8 cm
With equal column width
1. Introduction,
2. Literature Review,
3. Materials and Methods,
4. Results and Discussion,
5. Conclusions,
Acknowledgement,
Nomenclature,
CRediT taxonomy
6. References,
Article(s)
Author(s), “Article Title”, Publication Name, Volume Number, Issue Number, Pages First Page-Last Page, Date of Publication.
1. Ali Kahraman, Murat Ciniviz, İlker Örs, Hidayet Oğuz, “The effect on performance and exhaust emissions of adding cotton oil methyl ester to diesel fuel”, International Journal of Automotive Engineering and Technologies (IJAET, ISSN 2146 - 9067), Volume: 5, Issue: 4, pp: 148-154, 2016.
2. Ulugbek Azimov, Do Hang “Multiparametric engine optimization with application of biodiesel blends for better performance and lower exhaust gas emissions”, International Journal of Automotive Engineering and Technologies (IJAET, ISSN 2146 - 9067), Volume: 7, Issue: 2, pp: 88-98, 2018.
3. Fatih Aydın, Tuğba Şahin “Investigation of Fuel Properties of Canola Oil Biodiesel, Bioethanol and Diesel Fuel Mixture”, International Journal of Automotive Engineering and Technologies (IJAET, ISSN 2146 - 9067), Volume: 7, Issue: 4, pp: 158-163, 2018.
Book(s)
Author(s), “Book Title”, Publisher, Date of Publication of the Book.
Web addresses
https://dergipark.org.tr/tr/pub/ijaet, day/mounth/year
If any table of figure is large than one column, figure or table can be located at the bottom or top of the page with one column. Figures must have at least 300 dpi resolution. Black and white or colored figures are acceptable. Each table and figure should be cited in the text.
Photographs
JPG or GIF format, Inserted immediately after the citation in the text.
Tables
Times New Roman, Font size 8-10 Inserted immediately after the citation in the text
File Format
The article format should be Microsoft word (Please, use format Microsoft word 1997-2003).
File Name
File name must be between two to four words. Use the title of your research paper as the file name. Avoid the words AP, Journal, Manuscript, Paper for AP – IJAET.