Force and Energy Requirement for Cutting of Corn Stalk and Cob

Year 2021, , 542 - 549, 15.12.2021

Abdullah Sessiz , Fatih Göksel Pekitkan , Emin Güzel

https://doi.org/10.31015/jaefs.2021.4.14

Cited By: 3

Abstract

In this study, the cutting force and energy requirement of corn (Zea mays L.) stalk at different internodes (diameter), from the bottom to the top internode positions for Pionner 2105, Pioner 1570, KWS and MAY 75 varieties, were determined. The mean diameter of internodes varied between 11.28-19.00 mm from top to bottom. Also, cob breakout force and energy requirements were determined for these varieties. According to test results, the cutting force requirement of the varieties were found statistically different. While the highest cutting force requirement was found in MAY75 variaty as 504.79 N and Pioneer 2105 as 537.80 N, the lowest values were obtained in the KWS variety as 409.50 N. Similar results were found for cutting energy values. While, there were no found difference between MAY 75 and Pioneer 2105 varieties, cutting energy requirements were found statistically different (p<0.01) among the other varieties. The highest cutting energy requirements has been found in Pioneer 2105 and MAY75 varieties, followed by Pioneer 1570 and KWS variaty, respectively. The lowest value was obtained in the KWS variety as 3.83 J. The difference between internodes was found statistically significant. The cutting force values varied between 806.00 N and 203.00 N, the cutting energy varied between 7.91 Joules and 1.56 Joules depend on internodes. The highest cutting force and cutting energy values were obtained at the first node as 806.00 N and 7.91 Joules, these values decreased as the diameter decreased from the bottom to the top. Tukey test results showed that there were no significant differences among the varieties in terms of both breakout force and breakout energy. However, the highest values were obtained as 382.7 N and 15.50 J in Pioneer1570 variety, while the lowest values were obtained as 319.0 N and 9.830 J in Pionner 2105 variety.

Keywords

Corn stalk, Cob breakout force, Cutting force, Cutting energy

References

• Alizadeh, M.R., Ajdadi, F.R., & Dabbaghi, A. (2011). Cutting energy of rice stem as influenced by internode position and dimensional characteristics of different varieties. Australian Journal of Crop Science, 5(6), 681-687. http://www.cropj.com/alizadeh _5_6_2011_ 681_687.pdf
• Allameh, A., & Alizadeh, M.R. (2016). Specific cutting energy variations under different rice stem cultivars and blade parameters. IDESIA (Chile), 34(5), 11-17. https://dx.doi.org/10.40 67/S0718-34292016005000024
• ASABE Standards, (2008). S358.2. Moisture Measurement – Forages. American Society of Agricultural and Biological Engineers, St. Joseph, MI.
• Aydın, İ., & Arslan, S. (2018). Mechanical properties of cotton shoots for topping. Industrial Crops & Products 112, 396–401 https://doi.org/10.1016/j.indcrop.2017.12.036
• Azadbakht, M., Esmaeilzadeh, E., & Esmaeili-Shayan, M. (2015). Energy consumption during impact cutting of canola stalk as a function of moisture content and cutting height. Journal of the Saudi Society of Agricultural Sciences, 14, 147–152. https://doi.org/10.1016/j.jssas.2013.10.002
• Chen, Y., Gratton, J.L., & Liu, J. (2004). Power requirements of hemp cutting and conditioning. Biosystems Engineering, 87(4), 417–424. https://doi.org/10.1016/j.biosystem seng.2003.12.012
• Ekinci, K., Yilmaz, D., & Ertekin, C. (2010). Effects of moisture content and compression positions on mechanical properties of carob pod (Ceratonia siliqua L.). African Journal of Agricultural Research, 5(10), 1015–1021. https://academicjournals.org/journal/AJAR/article-full-text-pdf/404EAD329811
• Ghahraei, O., Ahmad, D., Khalina, A., Suryanto, H., & Othman, J. (2011). Cutting tests of kenaf stems. Transactions of the ASABE, 54(1), 51-56. https://pubag.nal.usda.gov/catalog/23427 27
• Hassan-Beygi S., Ghozhdi H., & Khazaei J. (2010). Picking force of saffron flower and shear strength of saffron stalk, Electronic Journal of Polish Agricultural Universities, 13(1), 9-9. http://www.ejpau.media.pl/volum e13/issue1/ art-09.html
• Heidari, A., & Chegini, G.R. (2011). Determining the shear strength and picking force of rose flower. Agricultural Engineering. Electronic Journal of Polish Agricultural Universities, 14(2), 13. http://www.ejpau.media.pl/ volume 14/issue2/art-13.html
• Igathinathane, C., Pordesimo, L., Schilling, M., & Columbus, E. (2011). Fast and simple measurement of cutting energy requirement of plant stalk and prediction model development. Industrial Crops and Products, 33, 518–523. https://doi.org/10.1016/j.indcrop.2010.10.015
• Igathinathane, C., Womac A.R., & Sokhansanj S. (2010). Corn stalk orientation effect on mechanical cutting. Biosystems Engineering, 107, 97-106. http://doi.org/10.1016/j.biosyste mseng.2010.07.005
• Kaliyan. N., & Morey, R.V. (2009). Constitutive model for densification of corn stover and switchgrass. Biosystems Engineering, 104, 47–63 https://doi.org/10.1016/j.biosystemsen g.2009.05.006
• Klingenfeld, D. (2008). Corn stover as a bioenergy feedstock: Identifying and overcoming barriers for corn stover harvest, storage, and transport. 2008 Harvard Kennedy School Policy Analysis Exercise, http://citeseerx.ist.p su.edu/viewdoc/download;jsessionid=200CAA17D17BCF4B28D160E30A5B45F4?doi=10.1.1.554.402&rep=rep1&type=pdf
• Kocabiyik, H., & Kayisoglu, B. (2004). Determination of shearing features of sunflower stalk. Journal of Agricultural Sciences, 10(3), 263–267. https://dspace.anka ra.edu.tr/xmlui/bitstream/handle/20.500.12575/ 56230/15268.pdf?sequence=1&isAllowed =y
• Kovács, A., & Kerényi. G. (2019). Physical characteristics and mechanical behaviour of maize stalks for machine development. International Agrophysics, 2019, 33, 427-436 https://doi.org/10.31545/intagr/113335
• Kronbergs, A., Širaks, E., & Kronbergs, A.E. (2011). Mechanical properties of hemp (cannabis sativa) biomass. Environment. Technology. Resources. Proceedings of the 8th International Scientific and Practical Conference. 1, 184-190. http://zdb.ru.lv/confe rences/4/VTR8_I_184.pdf
• Lien, C.C., & Liu, H.W. (2015). Shear characteristics of napier grass stems. Applied Engineering in Agriculture, 31(1), 5-13. American Society of Agricultural and Biological Engineers ISSN 0883-8542. http://dx.doi.org/10.13031/aea.31 .10497
• Mani, S., Tabil, L.G., & Sokhansanj, S. (2006). Specific energy requirement for compacting corn stover. Bioresource Technology, 97, 1420–1426. https://doi.org/10.1016/j.biortech.2005.06.019
• Mohsenin, N.N. (1986). Physical properties of plant and animals materials. 2nd edition. New York, NY: Gordon and Breach Science Publishers. https://doi.org/10.1002/food.19870310724
• Nazari Galedar M., Jafari A, Mohtasebi S.S., Tabatabaeefar A., Sharifi A., O’Dogherty M.J., Rafee S., & Richard G. (2008). Effects of moisture content and level in the crop on the engineering properties of alfalfa stems. Biosystems Engineering, 101(2), 199–208. https://doi.org/10.1016/j.biosystemseng.2008.07.006
• Nowakowski, T. (2016). Empirical model of unit energy requirements for cutting giant miscanthus stalks depending on grinding process parameters. Annals of Warsaw University of Life Sciences – SGGW, Agriculture (Agricultural and Forest Engineering), 67, 63–70. https://www.cabdire ct.org/cabdirect/FullTextPDF/2016/20163299165.pdf
• Özdemir, G., & Sessiz, A. (2018). Determination of physical and chemical composition in different maturity time of Öküzgözü, Boğazkere and Sire grape berries. Yalova Atatürk Bahçe Kültürleri Merkez Araştırma Enstitüsü Dergisi-Bahçe, (47-Özel Sayı 1: Türkiye 9. Bağcılık ve Teknolojileri Sempozyumu): 243–248, ISSN 1300–8943. https://app.trdizin.gov.tr/publication/pape r/d etail/TWprM01qWTBOQT09
• Ozdemir, G., Sessiz, A., Esgici, R., & Elicin, A.K. (2015). Cutting properties of wine grape cultivars. Scientific Papers. Series B, Horticulture, LIX, 151-158. http://horticulturejournal.usamv.ro/pdf/2015/art23.pdf
• Oztürk, F., Pekitkan., F.G., Esgici, R., & Eliçin, A.K. (2017). Some mechanical properties of soybean (glycine max) stems and seeds. Scientific Papers. Series A. Agronomy, LX, 352-355, ISSN: 2285-5785. http://agronomyj ournal.usamv.ro/pdf/2017/Art57.pdf
• Pekitkan, F.G., Esgici, R., Elicin, A.K., & Sessiz, A. (2018). The change of shear force and energy of cotton stalk depend on knife type and shear angle. Scientific Papers. Series A. Agronomy, LXI(1), 360-366. http://agronomyjournal.usa mv.ro/pdf/2018/issue_1/Art56.pdf
• Persson, S. (1987). Mechanics of cutting plant material. ASAE Monograph No. 7. American Society of Agricultural Engineers. St. Joseph, Michigan. 192-193.
• Prasad, J., & Gupta, C.B. (1975). Mechanical properties of maize stalks as related to harvesting. Journal of Agricultural Engineering Research, 20(1), 79–87. https://doi.org/10.1016/0021-8634(75)90098-0
• Reddy, N., & Yang, Y. (2005). Structure and properties of high quality natural cellulose fibers from cornstalks. Polymer, 46(15), 5494–5500 https://doi.org/10.1016/j.polymer.2005.04.073
• Sessiz, A., Elicin, A.K., & Bayhan, Y. (2019). Cutting force and energy requirement of Bogazkere grape (Vitis Vinifera L) cane. Scientific Papers. Series B, Horticulture, LXIII(1), Bucharest, Romania. http://horticulturejournal.usamv.ro/pdf/2019/issue_1/Art38.pdf
• Sessiz, A., Elicin, A.K., Esgici, R., Ozdemir, G., & Nozdrovický, L. (2013). Cutting properties of olive sucker. Acta Technologica Agriculturae, 16(3), 80–84. http://dx.doi.org/10.2478/ata-2013-0021
• Sessiz, A., Esgici, R., Ozdemir, G., Elicin, A.K., & Pekitkan, F.G. (2015). Cutting properties of different grape varieties. Agriculture & Forestry, 6(1), 211-216. http://89.188.43.75/agricultforest/20150318-27%20Sessiz%20et%20al.pdf
• Sessiz, A., Güzel, E., & Bayhan, Y. (2018). Determination of cutting force and energy in grape cane in some domestic and foreign grape varieties. Turkish Journal of Agricultural and Natural Sciences, 5(4), 414–423, https://doi.org/10.30910/turkjans.47120 3
• Srivastava, A.K., Georgin, C.E., Rohrbach, R.P., & Buckmaster, D.R. (2006). Engineering principles of agricultural machines. 2nd Edition. ASABE. https://doi.org/10.13031/ep am.2013
• Taghijarah, T., Ahmadi, H., Ghahderijani, M., & Tavakoli, M. (2011). Shearing characteristics of sugar cane (Saccharum officinarum L.) stalks as a function of the rate of the applied force. Australian Journal of Crop Science, 5(6), 630-634. http://www.cropj.com/tavakoli _5_6_2011_630_634.pdf
• Vu, V.D., Nguyen, T.T., Chu, N.H., Ngo, Q.H., Ho, K.T., & Nguyen, V.D. (2020). Multiresponse optimization of cutting force and cutting power in chopping agricultural residues using grey-based Taguchi Method. Agriculture, 10, 51. https://doi.org/10.3390/agriculture100300 51
• Womac, A.R., Yu, M., Igathinathane P. Ye, C., Hayes, D., Narayan, S., Sokhansanj, S., & Wright, L. (2005). Shearing Characteristics of Biomass for Size Reduction. An ASAE Meeting Presentation, Paper Number: 056058 http://biomasslogistics.org/publications/37womac.pdf
• Wright, C.T., Pryfogle, P.A., Stevens, N.A., Steffler, E.D., Hess, J.R., & Ulrich, T.H. (2005). Biomechanics of wheat/barley straw and corn stover. Twenty-Sixth Symposium on Biotechnology for Fuels and Chemicals. ABAB Symposium. Humana Press. http://doi.org/10.1007/978-1-59259-991-2_2
• Yore, M.W., Jenkins, B.M., & Summers, M.D. (2002). Cutting properties of rice straw. Paper Number: 026154. ASAE Annual International Meeting / CIGR XVth World Congress. https://doi.org/10.13031/2013.9785
• Zareiforoush, H., Mohtasebi, S.S., Tavakoli, H., & Alizadeh, M.R. (2010). Effect of loading rate on mechanical properties of rice (Oryza sativa L.) straw. Australian Journal of Crop Science, 4(3), 190–195 http://www.cropj.com/tavakoli _4_3_2010_190_195.pdf
• Zhang, K., He, Y., Zhang, H., & Li, H. (2017). Research on mechanical properties of corn stalk. AIP Conference Proceedings, 1820, 050007. https://doi.org/10.1063/1.4977311
• Zhang, L., Yang, Z., Zhang, Q., & Guo, H. (2016). Tensile properties of maize stalk rind. BioResources, 11(3), 6151-6161. http://doi.org/10.15376/biores.11.3.6151-6161
• Zhengguang, C., Defu, W., Liqiao, L., & Ruixia, S. (2012). Experiment on tensile and shearing characteristics ofrind of corn stalk. Transactions of the Chinese Society of Agricultural Engineering, 28(21), 59-65(7) http://doi.org/10.3969/j.issn.1002-6819.2012.21.009