Research Article

DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS

Volume: 6 Number: 3 September 28, 2018
EN TR

DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS

Abstract

Orthosis is a 3D material that supports the deformed field. These orthotic materials are used to help weak muscle function, to support muscles and joints, to correct posture, to continue to work despite unbalanced movements, and to heal fractures. Upper and lower extremity orthosis practices are available. Upper limb orthosis; shoulder, elbow, wrist, hand or fingers. Prevents or supports unwanted movements. There are various upper extremity orthoses called fingers, hand splints, hand and wrist atrophy, elbow orthosis, shoulder orthosis according to the region where they are practiced. Orthoses applied to the hand and arm are usually provided for short-term use. Nowadays, with the new generation of the industrial orthosis and 3D designs, the treatment of deformity has become possible by using simulation techniques on the biomechanical data. The purpose of this study is to discuss the advantage of the 3-dimensional PLA-based finger-tipped orthosis on the individual's superiority against other conventional methods and designs in the treatment of upper limb finger conservative treatment.

Keywords

References

  1. Referans1 Jarvik JG, Dalinka MK, 1991. Kneeland JB. Hand injuries in adults. Semin Roentgenol. 26, 282-299.
  2. Referans2 Smith ME, Auchincloss JM, Ali MS., 1985. Causes and consequences of hand injury, J Hand Surg, 10, 288-292.
  3. Referans3 Sorock GS, Lombardi DA, Hauser RB, Eisen EA., 2002. Acute traumatic occupational hand injuries: Type, location, and, severity. J Occup Environ Med. 44, 345-351.
  4. Referans3 Jackson LL., 2001. Non-fatal occupational injuries and illnesses treated in hospital emergency department in the United States. Inj Prev. 7, 121-126.
  5. Referans4 Pettengill K M, van Strein G., 2002. Postoperative management of flexor tendon injuries. In: Hunter M, Rehabilitation of the hand and upper extremity 5th ed St Louis, Missouri, Mosby. 431-456.
  6. Referans5 Lister G.D. Flexor tendon. In JG. Me Carthy ed., 1990. Plastic Surgery. Vol: 7, pp:. Philadelphia, W.B. Saunders. 7, 4516-4564.
  7. Referans6 Wren T.A.L, Yerby .S.A, Beaupre G.S, Carter D.R., 2001. Mechanical properties of human Achilles tendon. Clin. Biomech. 16, 245-251.
  8. Referans7 Zhang A.Y, Chang J., 2003. Tissue engineering of flexor tendons. Clin. Plastic. Surg. 30, 565-572.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Publication Date

September 28, 2018

Submission Date

May 10, 2018

Acceptance Date

September 12, 2018

Published in Issue

Year 2018 Volume: 6 Number: 3

APA
Cıftcı, F., Hacıoglu, A., Yesil, T. B., & Ustundag, C. B. (2018). DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. Mühendislik Bilimleri Ve Tasarım Dergisi, 6(3), 460-463. https://doi.org/10.21923/jesd.422598
AMA
1.Cıftcı F, Hacıoglu A, Yesil TB, Ustundag CB. DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. JESD. 2018;6(3):460-463. doi:10.21923/jesd.422598
Chicago
Cıftcı, Fatih, Askican Hacıoglu, Taylan Baran Yesil, and Cem Bülent Ustundag. 2018. “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”. Mühendislik Bilimleri Ve Tasarım Dergisi 6 (3): 460-63. https://doi.org/10.21923/jesd.422598.
EndNote
Cıftcı F, Hacıoglu A, Yesil TB, Ustundag CB (September 1, 2018) DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. Mühendislik Bilimleri ve Tasarım Dergisi 6 3 460–463.
IEEE
[1]F. Cıftcı, A. Hacıoglu, T. B. Yesil, and C. B. Ustundag, “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”, JESD, vol. 6, no. 3, pp. 460–463, Sept. 2018, doi: 10.21923/jesd.422598.
ISNAD
Cıftcı, Fatih - Hacıoglu, Askican - Yesil, Taylan Baran - Ustundag, Cem Bülent. “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”. Mühendislik Bilimleri ve Tasarım Dergisi 6/3 (September 1, 2018): 460-463. https://doi.org/10.21923/jesd.422598.
JAMA
1.Cıftcı F, Hacıoglu A, Yesil TB, Ustundag CB. DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. JESD. 2018;6:460–463.
MLA
Cıftcı, Fatih, et al. “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”. Mühendislik Bilimleri Ve Tasarım Dergisi, vol. 6, no. 3, Sept. 2018, pp. 460-3, doi:10.21923/jesd.422598.
Vancouver
1.Fatih Cıftcı, Askican Hacıoglu, Taylan Baran Yesil, Cem Bülent Ustundag. DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. JESD. 2018 Sep. 1;6(3):460-3. doi:10.21923/jesd.422598

Cited By