Araştırma Makalesi

DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS

Cilt: 6 Sayı: 3 28 Eylül 2018
PDF İndir
EN TR

DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS

Öz

Orthosis is a 3D material that supports the deformed field. These orthotic materials are used to help weak muscle function, to support muscles and joints, to correct posture, to continue to work despite unbalanced movements, and to heal fractures. Upper and lower extremity orthosis practices are available. Upper limb orthosis; shoulder, elbow, wrist, hand or fingers. Prevents or supports unwanted movements. There are various upper extremity orthoses called fingers, hand splints, hand and wrist atrophy, elbow orthosis, shoulder orthosis according to the region where they are practiced. Orthoses applied to the hand and arm are usually provided for short-term use. Nowadays, with the new generation of the industrial orthosis and 3D designs, the treatment of deformity has become possible by using simulation techniques on the biomechanical data. The purpose of this study is to discuss the advantage of the 3-dimensional PLA-based finger-tipped orthosis on the individual's superiority against other conventional methods and designs in the treatment of upper limb finger conservative treatment.

Anahtar Kelimeler

Kaynakça

  1. Referans1 Jarvik JG, Dalinka MK, 1991. Kneeland JB. Hand injuries in adults. Semin Roentgenol. 26, 282-299.
  2. Referans2 Smith ME, Auchincloss JM, Ali MS., 1985. Causes and consequences of hand injury, J Hand Surg, 10, 288-292.
  3. Referans3 Sorock GS, Lombardi DA, Hauser RB, Eisen EA., 2002. Acute traumatic occupational hand injuries: Type, location, and, severity. J Occup Environ Med. 44, 345-351.
  4. Referans3 Jackson LL., 2001. Non-fatal occupational injuries and illnesses treated in hospital emergency department in the United States. Inj Prev. 7, 121-126.
  5. Referans4 Pettengill K M, van Strein G., 2002. Postoperative management of flexor tendon injuries. In: Hunter M, Rehabilitation of the hand and upper extremity 5th ed St Louis, Missouri, Mosby. 431-456.
  6. Referans5 Lister G.D. Flexor tendon. In JG. Me Carthy ed., 1990. Plastic Surgery. Vol: 7, pp:. Philadelphia, W.B. Saunders. 7, 4516-4564.
  7. Referans6 Wren T.A.L, Yerby .S.A, Beaupre G.S, Carter D.R., 2001. Mechanical properties of human Achilles tendon. Clin. Biomech. 16, 245-251.
  8. Referans7 Zhang A.Y, Chang J., 2003. Tissue engineering of flexor tendons. Clin. Plastic. Surg. 30, 565-572.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

28 Eylül 2018

Gönderilme Tarihi

10 Mayıs 2018

Kabul Tarihi

12 Eylül 2018

Yayımlandığı Sayı

Yıl 2018 Cilt: 6 Sayı: 3

Kaynak Göster

APA
Cıftcı, F., Hacıoglu, A., Yesil, T. B., & Ustundag, C. B. (2018). DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. Mühendislik Bilimleri ve Tasarım Dergisi, 6(3), 460-463. https://doi.org/10.21923/jesd.422598
AMA
1.Cıftcı F, Hacıoglu A, Yesil TB, Ustundag CB. DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. MBTD. 2018;6(3):460-463. doi:10.21923/jesd.422598
Chicago
Cıftcı, Fatih, Askican Hacıoglu, Taylan Baran Yesil, ve Cem Bülent Ustundag. 2018. “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”. Mühendislik Bilimleri ve Tasarım Dergisi 6 (3): 460-63. https://doi.org/10.21923/jesd.422598.
EndNote
Cıftcı F, Hacıoglu A, Yesil TB, Ustundag CB (01 Eylül 2018) DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. Mühendislik Bilimleri ve Tasarım Dergisi 6 3 460–463.
IEEE
[1]F. Cıftcı, A. Hacıoglu, T. B. Yesil, ve C. B. Ustundag, “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”, MBTD, c. 6, sy 3, ss. 460–463, Eyl. 2018, doi: 10.21923/jesd.422598.
ISNAD
Cıftcı, Fatih - Hacıoglu, Askican - Yesil, Taylan Baran - Ustundag, Cem Bülent. “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”. Mühendislik Bilimleri ve Tasarım Dergisi 6/3 (01 Eylül 2018): 460-463. https://doi.org/10.21923/jesd.422598.
JAMA
1.Cıftcı F, Hacıoglu A, Yesil TB, Ustundag CB. DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. MBTD. 2018;6:460–463.
MLA
Cıftcı, Fatih, vd. “DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS”. Mühendislik Bilimleri ve Tasarım Dergisi, c. 6, sy 3, Eylül 2018, ss. 460-3, doi:10.21923/jesd.422598.
Vancouver
1.Fatih Cıftcı, Askican Hacıoglu, Taylan Baran Yesil, Cem Bülent Ustundag. DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. MBTD. 01 Eylül 2018;6(3):460-3. doi:10.21923/jesd.422598

Cited By