Volume: 3 Issue: 2, 12/31/21

Year: 2021

Research Articles

The Journal of Innovations in Civil Engineering and Technology aims to reach the latest scientific and technological developments in fields of civil engineering, architecture, environmental engineering, geomatics engineering, and geology engineering  to the scientists, engineers, sectors, and readers.

The Journal of Innovations in Civil Engineering and Technology (JICIVILTECH) is a open access peer-reviewed international scientific journal that publishes original research articles as well as review articles in all areas of civil engineering and architecture. The journal accepts article studies from the specified disciplines and publishes research and review studies in its field. Contributions from academia and from industry are equally encouraged.

"The Journal of Innovations in Civil Engineering and Technology (JICIVILTECH)" is a Journal that includes original engineering articles, as well as qualified research and review studies in all areas of civil engineering, architecture, environmental engineering, geomatics engineering, and geology engineering. The writing principles of the articles to be published in the journal are given below. All articles, which will be published, are evaluated by the scientific committee for their scientific contribution, originality, and content. Authors are responsible for the accuracy of their data given. The journal reserves the right to make appropriate corrections regarding language and spelling where it deems necessary. The articles can be sent back to the responsible author for revision when considered necessary. All copyrights of the articles published in the journal belong to the journal. Articles previously published in a journal in any language will not be considered for publication in the journal. Authors cannot send an article submitted to The Journal of Innovations in Civil Engineering and Technology (JICIVILTECH) to another journal.
Authors must upload the copyright transfer form to the system at the first registration, along with the article, via the online system (Dergipark system).


Please prepare the article presentation in MS-Word® 2010 format.
Submitted articles will be reviewed and evaluated by the relevant field editors, and the author will be informed about the status of the article.

Writing language

Turkish or English.

Margins

(Right-Left-Bottom-Top) should be 2.5 cm.

Column Dimensions

Column Width should be 6.3 cm, and the interval should be 1.25 cm.

Title

14 Punto, Palatino Linotype font, centered and initials capitalized (except and, with, etc.). The title should be appropriate to the text, short and clear.

Author Names

The first letter of the author (s) 's name should be written in capital letters, the others should be in small letters, and the surname should be centered in capital letters, written in 10 font size. No academic titles are specified when writing the names of the authors. More than one author's name should be separated by commas and listed side by side. Numbers should be used as superscript to indicate author information (1, 2, 3, etc.) after author names. The name of the corresponding author must have a superscript star symbol (*). Author's name and surname should be written, and 1 line space should be left and the author's address, mail and ORCID ID information should be written in 8 pt, italic and centered. Author (s) are required to acquire and state an open researcher and participant ID (ORCID) (http://orcid.org).

Summary

It should be written without using a paragraph, not less than 100 words, and not exceeding 200 words. Abstract must be 10 point font, Palatino Linotype font, and justified.
1. Research article; If it is written in English, there should be an English title and summary followed by a Turkish title and summary.

2. Research article; If it is written in Turkish, there should be a Turkish title and summary followed by an English title and summary.

Keywords

It should be given at least 3 and maximum 5, 10 point, Palatino Linotype font, aligned on both sides and in Turkish / English. The first letters of the keywords must be capital, with ","

Text

It should be prepared in two columns under the main headings of Introduction, Material and Method, Results (Results and Discussion), Discussion and Conclusion (Results), and References.

If there is, Acknowledgment section should be placed just before the Resources section. The text of the article should be written in Palatino Linotype font, 10 pt. Spacing 0 cm, Single line spacing and aligned to both sides (Only the text in the Acknowledgments and References section should be 9 pt.). The text can include numbered subheadings as needed. Each subtitle should be listed under its main heading. For example; 2.1., 2.2., 2.3. etc. The first letters of all the words of the 1st, 2nd and 3rd degree titles in the text should be written in capital letters (except and, etc.) and bold, for lower titles only the first word of the title should be capitalized and italicized. There should not be any spaces between paragraphs. The entire article should not exceed 20 pages, including text, tables, and figures.

Figures

It must be in JPEG or TIFF format. Figure texts should be below the figure, Palatino Linotype font, 10 pt., Aligned on both sides and specially hanging (1.25 cm). The width of the figures should not exceed 6.3 cm for two columns and 13.2 cm for a single column. Each figure should be placed in the nearest place of reference in the text. Before the figure, reference should be made to the relevant figure. See the article template for an example of the figure. When ordering items in the text, bullets such as • should be preferred instead of numbers such as 1, 2, and 3.

Tables

Table titles should be on the upper side of the table, with Palatino Linotype font, 10 pt., Special hanging (1.25 cm) aligned on both sides. Each table should be placed in the nearest place of reference in the text. Before the table, reference must be made to the relevant table. See the article template for a sample table.

Equations

All formulas in the text should be written with the help of the equation editor in Palatino Linotype font and 10 pt using MS Office equation editor, and the equation number should be given in brackets (1), (2) at the end of the line where the equation is written. All units in articles must be in the SI unit system.

Section

        1. Introduction:

The purpose and original value of the study, the studies done in the past, the research problem and how the presented study produced a solution, the innovation it brought to the literature, etc. This section should be specified by collating. A raw literature summary should be avoided. SI (Systeme International) units and abbreviations should be used in the article. When other abbreviations are used, they should be explained once in the first mention in the text.

        2. Material and Method:

If the study is experimental, the experimental methods used should be given in detail and descriptively. The method (s) used in the article should be written descriptively in a way that can be repeated by other researchers.

        3. Findings (Findings and Discussion):

In this section, the data or findings obtained should be given; The results should be explained, if necessary, supported by tables and figures. The results should be discussed in a scientific framework, but unnecessary duplication should be avoided. In this section, rather than giving literature information, the results of the study should be focused on, the similarities and differences of the results with the previous studies should be given, and their possible reasons should be discussed. In this section, the contribution and importance of the obtained results to science should be included as much as possible.

        4. Discussion and Conclusion (Results):

The main purpose and objectives of the study, the most important results achieved in line with these goals, and general evaluations and recommendations should be presented in this section.

        Appreciation

The appreciation text should be formatted in Palatino Linotype font, 9 pt, Spacing 0 cm, Single line spacing and aligned to both sides. If people or institutions are to be thanked, they should be written in this section. If there is a supported project, the project source and number should be specified.

        5. References

Palatino Linotype font should be 9 pt. (Indentation: Special Hanging 0.5 cm). Each reference should be without gaps. All literature referred to in the text should be included in "References". Unpublished information should not be given as a reference. (Examples of unpublished sources: Articles that are being prepared or sent to publish, unpublished information or observations, information obtained by interviewing individuals, reports, lecture notes, seminars, etc.). However, completed and juryed theses and articles with DOI numbers can be given as references. References should be given in alphabetical order at the end of the article (according to the surnames of the authors). If many publications of the same author (s) are cited, in the "sources" section, the relevant sources are listed in an order from old to new. Sources with the same date are listed by letter. For example: 2019a, 2019b. For authors with the same surname, the first letter of the first name is given alphabetically before the bibliography. For authors with the same surname, the first letter of the name is given alphabetically before the bibliography, even if the publication is older.

        Attachments
The survey form, data, statistical analysis etc., supporting documents can be given in the appendices section. When more than one additional document is required to be submitted, a separate sequence number should be given for each annex. Appendices should be presented on different pages after the bibliography.

Endnote APA 6 format should be used in in-text references and in the writing of the bibliography, and the spelling rules of the journal should be carefully examined.

Forms of Referring Within the Text should be made as below;

At the beginning of the sentence;

Single author;
Korkmaz (2019)
Two authors;
Gurer and Korkmaz (2019)
With more than two authors; While all author surnames are written where the first citation is made, only the surname of the first author is written in subsequent citations.
First cited impression ---> Akbulut, Gürer, and Korkmaz (2019)
The notation in the second reference ---> Akbulut et al. (2019)

At the end of the sentence;

If a general reference is quoted in the text, the author's surname and publication year should be written in parentheses.
For example (Korkmaz, 2019).
If a specific page is quoted from a book, the reference should be given with the page number. For example (Korkmaz, 2019, p.42).
If an author's works of the same date are quoted; (Korkmaz, 2019a) and (Korkmaz, 2019b).
With two authors; (Gürer & Korkmaz, 2019)
If there are more than two authors; While all author surnames are written where the first citation is made, only the surname of the first author is written in subsequent citations.
First cited impression ---> (Akbulut, Gürer, & Korkmaz, 2019)
The notation in the second citation ---> (Akbulut et al., 2019)
If more than one source is to be cited;
(Korkmaz, 2019; Gürer & Korkmaz, 2019; Akbulut et al., 2019)

Note;
It is essential to reach the main reference in scientific studies. However, in cases where the original reference is not available, if the secondary reference is quoted, the secondary reference is indicated in the bibliography. For example (Korkmaz, quoted by Gürer, 2019). Korkmaz (2019) is included in the list of references with all his bibliographic information, while Gürer is not included in the references.

WRITING RULES OF THE REFERENCES

1. Reference from the Book.

    1.1. Book with a single author or editor

Author's Surname, Author's Initials. (Year). The title of the book is in italics and after the first letter (except for proper names) all in lowercase. Place of Print: Publisher.
Author's Surname, Author's Initials. (Year). Chapter title. E. E. (Ed.), The title of the book is in italics and after the first letter (except for proper names) in lowercase (pp. Xx-xx). Place of publication: Publisher.
    
    1.2. Book with two or more authors or editors

First Author's Last Name, First Author's Initials. and Second Author's Last Name, Second Author's Initials. (Year). The title of the book is in italics and after the first letter (except for proper names) all in lowercase. Place: Publisher.
First Author's Last Name, First Author's Initials., Second Author's Last Name, Second Author's Initials. and Third Author's Last Name, Third Author's Initials. (Year). The title of the book is in italics and after the first letter (except for proper names) all in lowercase. Place: Publisher.

    1.3. Revised or enlarged prints

Author's Surname, Author's Initials. (Year). The title of the book is in italics and after the first letter (except for proper names) in lower case (Revised / expanded xth edition). Place of Print: Publisher.

    1.4. Books with an unknown author

The title of the book is in italics and after the first letter (except for proper names), all in lowercase. (Year). Place: Publisher.
    
    1.5. Books of two or more volumes

Author's Surname, Author's Initials. (Year). The title of the book is in italics and after the first letter (except for proper names), all in lowercase (x. Volume). Place of Print: Publisher.

    1.6. Translated books

Author's Surname, Author's Initials. (Year). The title of the book is in italics and after the first letter (except for proper names), all in lowercase. (Initial Letters of Translator's Name. Translator's Surname, Trans.) Place of Publication: Publisher.
    
    1.7. Writing in a compiled book
Author's Surname, Author's Initials. (Year). Title of the article. The title of the book is in italics and after the first letter (except for proper names) in lower case (pp. Page number range). Place of Print: Publisher.

    1.8. An article or chapter in the review

Author's Surname, Author's Initials. (Year). Title of the article. Initial letter of the editor's name (s). Editor's surname (Ed.), The name of the book in italics and all lowercase after the first letter (except for proper names) (pp. Page number range). Place of Print: Publisher.

    1.9. Chapter or article in reference books

Author's Surname, Author's Initials. (Year). Title of the article. The title of the book is in italics and after the first letter (except for proper names) in lower case (pp. Page number range). Place of Print: Publisher.

2. Articles

Author's Surname, Author's Initials. (Year, Month, if any). The name of the article is only the first letter of the first word is capitalized, and the rest is lowercase if the rest is not a proper name, Journal Name Italic and First Letter of Each Word Capitalized (International Abbreviation if available), Volume Italic (Number), Page Number Range doi: xxxxxx

3. Other References

    3.1. Internet references

Author's Last Name, Author's Initials (or source name). (Published Year, Month Day). The name of the article is in italics, only the first letter of the first word is capitalized, the rest is lowercase if not a proper name. Retrieved Month Day, Year, from https: // .......

Example:

World Health Organization. (2018, May 24). The top 10 causes of death. Retrieved December 28, 2019, from https://www.who.int/news-room/fact-sheets/detail/the-top-10-causes-of-death

4. Unpublished master's / doctoral dissertations

Author's Surname, Author's Initials. (Year). The name of the thesis is in italics, only the first letter of the first word is capitalized, the rest is lowercase if not a proper name. Unpublished Master's / Doctoral Thesis. Name of the Institution, Location of the Institution, Country

5. Published master's / doctoral dissertations

Author's Surname, Author's Initials. (Year). The name of the thesis is in italics, only the first letter of the first word is capitalized, the rest is lowercase if not a proper name. Master / Doctorate Thesis. Name of the Institution, Location of the Institution, Country

6. Notification

Author's Surname, Author's Initials. (Year). Name of the notification, only the first letter of the first word is capitalized, the rest is lowercase if not proper. Papers Published in Conference, Kongra Symposium Name in Italic and First Letter of Each Word Capitalized. City Country.

7. Patent

Author's Surname, Author's Initials. (Year), Patent Received Institution and Number. Location.

8. Standard

Standard Authority. (Year). Standard number: Title. Place: Author.

9. Government Report

Government writer. (year). Report title: Subtitle of the report, if any (Report No. 123). Retrieved from http: // xxxxx

Publication Ethics and Abuse Statement

"The Journal of Innovations in Civil Engineering and Technology (JICIVILTECH)" undertakes to apply the highest standards of publication ethics and to abide by the following principles of the Publication Ethics and Abuse Statement. This declaration has been prepared on the basis of the recommendations and guidelines developed by the organization's named Committee on Publication Ethics (COPE), Council of Science Editors (CSE), World Association of Medical Editors (WAME), and International Committee of Medical Journal Editors (ICMJE).

Manuscripts submitted to the journal for publication should not have been previously published in another journal (including papers presented at scientific meetings and published in full text) or sent to any journal simultaneously for publication.

Manuscripts submitted to the journal are evaluated by an editor and at least two reviewers and are taken into the double-blind peer-review process. It reserves the right to review the submitted articles at any stage for plagiarism by means of purposeful software. For this purpose, unauthorized quotations or fake data for plagiarism, forgery (table figures or fabrication or manipulation of research data), and articles that do not comply with the standards, which are about the use of inappropriate human or animal material in the research are not published in the journal. It is also valid when the standard and its non-conformance are detected in the post-publication stage and requires the retraction of the manuscript. Our journal reminds you of its responsibility to report plagiarism or suspicion of double publication due to publication ethics. No fee is charged for articles accepted to be published in the journal.

Our journal is taken as the basis on Publication Ethics Flowcharts developed by COPE in possible cases of abuse or violation of publication ethics. Please click for detailed information on this subject.


Author Responsibilities


Author (s) should ensure the originality of the manuscripts submitted. They must declare that the manuscript has not been published anywhere, in any language, or has not been evaluated for publication. They must comply with applicable copyright agreements and laws. In our journal, copyrighted material such as tables, figures, or other contributory quotations is published only with valid permission and copyright approval and this responsibility belongs to the authors. Author (or authors); should cite other authors, contributors, or sources appropriately and cite relevant sources. Author (s) of research papers (including short reports); Participate in and declare at least 3 stages of "designing the study", "collecting data", "reviewing data", "writing the text" and "confirming the accuracy of data and analyzes”. The authors are obliged to explain a financial relationship or conflict of interest or competing interest areas that need to be known about the study and may potentially affect the findings or scientific result of the study. They should clearly report all financial contributions, sponsorships, or project support to the work. When the author detects a meaningful scientific error or inconvenience in his published manuscript, he is obliged to contact the Editor as soon as possible in order to withdraw the manuscript or correct the error.


Reviewer Responsibilities

Reviewers evaluate the incoming manuscripts in terms of scientific content, regardless of their authors' ethnicity, gender, nationality, religious belief, or political philosophy. In terms of reviewers; There should be no conflict of interest or competition with the research, authors, or sponsors. Reviewers' decisions must be objective. Reviewers should indicate relevant publications that have not been cited by the author. They are obliged to keep all information about the submitted article confidential and to notify the Editor when they are aware of copyright infringement and plagiarism by the author. If the reviewers think that the content of a submitted manuscript is incompatible with his / her scientific field or experience, or if he/she cannot make a rapid evaluation, he/she should inform the Editor and ask for forgiveness from the evaluation process. Click here to access the "Reviewer Guide" PDF document prepared by COPE.


Editor Responsibilities


Editors evaluate incoming manuscripts in terms of scientific content regardless of their authors' ethnicity, gender, gender preference, nationality, religious belief, or political philosophy. They provide a fair double-blind peer-review process for the publication of submitted manuscripts.

They ensure that all information regarding the submitted article is kept confidential until it is published.


Editor; It should not allow any conflicts of interest or competition that may arise between authors, editors, and referees. In the Journal of Innovations in Civil Engineering and Technology, only the Editor has the full authority to appoint a referee and is responsible for the final decision regarding the publication of the articles. Editors are responsible for the content and overall quality of the publication. They publish revisions through the Erratum pages when necessary.

Click here to access the PDF document titled "General Duties and Responsibilities of Editors" prepared by COPE.

There is no charge for the authors to publish their work and download the full texts of the articles in the journal.