Development and Evaluation of the corrosion Protection of Epoxy-Palm kernel shell Ash nanoparticles coating for Mild steel
Abstract
Mild steels are important construction materials in our modern society; hence, it finds application in general purpose engineering as a versatile material. However, steels corrode due to exposure to oxygen and moisture. The protection of steel against corrosion is of importance to the industry as well as Nigeria and the world at large. Corrosion can be controlled or reduced through the use of suitable and locally available materials in production of coatings for Mild steel. Nanoparticles due to their large surface areas have been shown to be excellent materials as they are good absorbents of coating pigments. Palm kernel shells are readily available and easily accessible in Nigeria and they contain calcium which easily combines with epoxy to give compounds resistant to corrosion attack. The effect of the addition of palm kernel shell ash nanoparticles (PKSAnp) in epoxy as a coating for mild steel was studied. 1, 2, 3, 4 and 5wt% palm kernel shell ash nanoparticles were added to epoxy. The coating was done using spraying method. Corrosion protection efficiency of 98.62% was obtained for the mild steel when coated with epoxy-5wt%ESAnp. The substrate showed more tendencies to pitting than the coated samples. This study has established that epoxy-5wt%ESAnp have good anti-corrosion properties
References
- [1] Zheludkevich, M. L., Salvado, I. M. and Ferreira, M. G.S. (2005) Sol–gel coatings for corrosion protection of metals. Journal of Material Chemistry. 15(48) 5099–511.
- [2] Min Z. R., Ming Q. Z., Hong L., Hamin Z., Bernd W. and Klaus F. (2001). Microstructure and tribological behaviour of polymeric nanocomposites. Journal of Industrial lubrication and tribology. 53(2), 72-77.
- [3] Gleiter. H. (2000). Nanostructured materials; Basic concepts and microstructure Acta Materialia, 48(1), 1-29. [4] Bagherzadeh M. R. and Mahdavi F. (2007) Preparation of Epoxy- clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating. Progress in organic coating. 60(2), 117-120.
- [5] Dagwa I. M., and Builders P. F., Achebo J., (2012) Characterization of palm kernel shell powder for use in polymer matrix composites. International Journal of Mechanical and Mechatronics Engineering. 12 (4), 88–93 . [6] Nwaobakata C. and Agunwamba J. C., (2014) Effect of palm kernel shells ash as filler on the mechanical properties of hot mix asphalt. Archives of Applied Science Research. 6 (5), 42-49.
- [7] Ikubanni, P. P., Oki, M., Adeleke, A. A., Adediran, A. A., & Adesina, O. S. (2020). Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell. Results in Engineering, 8, 100173. doi:10.1016/j.rineng.2020.100173
- [8] Smith, J.L. And Yirmani Y.P. (2000). Materials and methods for corrosion control of reinforced and prestressed concrete structures in new construction. Material sciences. 165. [9] Chanadee T.and Chaiyarat S. (2016) . Preparation and Characterization of Low Cost Silica Powder from Sweet Corn Cobs (Zea mays saccharata L.) Journal of Material Environment Science. 7 (7), 2369-2374. [10] Hassan S.B., Aigbodion V.S, and Patrick S.N. (2012) Development of Polyester/Eggshell Particulate Composites. Tribology in Industry. 34(4), 217-225. [11] Durodola, B.M., Olugbuyiro, J.A.O., Moshood, S.A. Fayomi, O.S.I. and Popoola, A.P.I. (2011). Study of Influence of Zinc Plated Mild Steel Deterioration in Seawater Environment. International Journal of Electrochemical Science. 6, 5605-5616
- [12] Hammami, O., Dhouibi, L., Bercot P., Rezrazi, E. and Triki, E. (2012). Study of Zn-Ni Alloy Coatings Modified by Nano-SiO2 Particles Incorporation. International Journal of Corrosion. Article ID 301392
DEVELOPMENT AND EVALUATION OF THE CORROSION PERFORMANCE OF EPOXY-PALM KERNEL SHELL ASH NANOPARTICLE COATING FOR MILD STEEL
Abstract
Mild steels are important construction materials in our modern society; hence, it finds application in general purpose engineering as a versatile material. However, steels corrode due to exposure to oxygen and moisture. The protection of steel against corrosion is of importance to the industry as well as Nigeria and the world at large. Corrosion can be controlled or reduced through the use of suitable and locally available materials in production of coatings for Mild steel. Nanoparticles due to their large surface areas have been shown to be excellent materials as they are good absorbents of coating pigments. Palm kernel shells are readily available and easily accessible in Nigeria and they contain calcium which easily combines with epoxy to give compounds resistant to corrosion attack. The effect of the addition of palm kernel shell ash nanoparticles (PKSAnp) in epoxy as a coating for mild steel was studied. 1, 2, 3, 4 and 5wt% palm kernel shell ash nanoparticles were added to epoxy. The coating was done using spraying method. Corrosion protection efficiency of 98.62% was obtained for the mild steel when coated with epoxy-5wt%ESAnp. The substrate showed more tendencies to pitting than the coated samples. This study has established that epoxy-5wt%ESAnp have good anti-corrosion properties
References
- [1] Zheludkevich, M. L., Salvado, I. M. and Ferreira, M. G.S. (2005) Sol–gel coatings for corrosion protection of metals. Journal of Material Chemistry. 15(48) 5099–511.
- [2] Min Z. R., Ming Q. Z., Hong L., Hamin Z., Bernd W. and Klaus F. (2001). Microstructure and tribological behaviour of polymeric nanocomposites. Journal of Industrial lubrication and tribology. 53(2), 72-77.
- [3] Gleiter. H. (2000). Nanostructured materials; Basic concepts and microstructure Acta Materialia, 48(1), 1-29. [4] Bagherzadeh M. R. and Mahdavi F. (2007) Preparation of Epoxy- clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating. Progress in organic coating. 60(2), 117-120.
- [5] Dagwa I. M., and Builders P. F., Achebo J., (2012) Characterization of palm kernel shell powder for use in polymer matrix composites. International Journal of Mechanical and Mechatronics Engineering. 12 (4), 88–93 . [6] Nwaobakata C. and Agunwamba J. C., (2014) Effect of palm kernel shells ash as filler on the mechanical properties of hot mix asphalt. Archives of Applied Science Research. 6 (5), 42-49.
- [7] Ikubanni, P. P., Oki, M., Adeleke, A. A., Adediran, A. A., & Adesina, O. S. (2020). Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell. Results in Engineering, 8, 100173. doi:10.1016/j.rineng.2020.100173
- [8] Smith, J.L. And Yirmani Y.P. (2000). Materials and methods for corrosion control of reinforced and prestressed concrete structures in new construction. Material sciences. 165. [9] Chanadee T.and Chaiyarat S. (2016) . Preparation and Characterization of Low Cost Silica Powder from Sweet Corn Cobs (Zea mays saccharata L.) Journal of Material Environment Science. 7 (7), 2369-2374. [10] Hassan S.B., Aigbodion V.S, and Patrick S.N. (2012) Development of Polyester/Eggshell Particulate Composites. Tribology in Industry. 34(4), 217-225. [11] Durodola, B.M., Olugbuyiro, J.A.O., Moshood, S.A. Fayomi, O.S.I. and Popoola, A.P.I. (2011). Study of Influence of Zinc Plated Mild Steel Deterioration in Seawater Environment. International Journal of Electrochemical Science. 6, 5605-5616
- [12] Hammami, O., Dhouibi, L., Bercot P., Rezrazi, E. and Triki, E. (2012). Study of Zn-Ni Alloy Coatings Modified by Nano-SiO2 Particles Incorporation. International Journal of Corrosion. Article ID 301392
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Research Article |
| Authors | |
| Submission Date | June 7, 2023 |
| Acceptance Date | August 5, 2023 |
| Publication Date | December 21, 2023 |
| DOI | https://doi.org/10.53525/jster.1248496 |
| IZ | https://izlik.org/JA63XB34GY |
| Published in Issue | Year 2023 Volume: 4 Issue: 2 |
