Journal of Science, Technology and Engineering Research

It is a PEER REVIEWED, OPEN ACCESS international journal that publishes articles related to science, technology and engineering and is published twice a year.

Journal of Science, Technology and Engineering Research (JSTER);
It is a PEER REVIEWED, OPEN ACCESS international journal that publishes articles related to science, technology and engineering. The Journal of Scientific, Technology and Engineering Research is a refereed, open access international academic journal that publishes articles on science, technology and engineering, and is published twice a year.

The Journal of Science, Technology and Engineering Research is a peer-reviewed, six-month, online international research journal that publishes original articles, research articles, articles and applications from all scientific fields of engineering and technology research. Journal of Science, Technology and Engineering Research is an international open access peer-reviewed online journal and offers original research articles and effective communication covering all areas of science, engineering and technology. The primary mission of the journal is to be the leading source of high-quality research from all over the world.

JSTER is a halve annually scientific journal edited by Editorial Board. It contains the theoretical and experimental studies concerning and perspective researches in the conception and scientific fields of technological projects and engineering applications. 

The editorial activity is coordinated by the Editorial Board and the Scientific Reviewers, who are impressive scientific staff from the departments in Turkey and other World Universities.

JSTER publishes the most recent theoretical and experimental studies concerning scientific fields of the technological projects and engineering applications focusing but not limiting on:

1. Electrical and Electronic Engineering
2. Automation, Computers and Information Technology
3. Energy, Sources and Energy Researches
4. Renewable Energy Systems
5. Mechanical Engineering and Mechatronic
6. Neuroscience and Biomedical Engineering
7. Industrial Engineering
8. Engineering and Management
9. Applied Engineering Sciences
10. Materials Science and Engineering
11. Chemical Engineering.
12. Environmental Protection Technologies
13. Aeronautical Engineering
14. Oil and Gas Engineering

DETAILED ENGINEERING SUBJECTS

• Engineering and Technology
  
• Aerospace Technologies
• Agricultural Technologies
• Artificial Intelligence
• Audio Systems
• Automotive Engineering
• Biological & Bio system
• Chemical Engineering
• Civil Engineering
  Design of Algorithms
• Electrical Engineering
• Electromechanical System
• Electronics & Communication
• Environment Engineering
• Food Protection Technologies
• Geological Engineering
• Image Processing
• Industrial Engineering
• Bioengineering
• Material Engineering
• Mathematic and Algorithms
• Mechanical Engineering
• Mineral & Metallurgical
• System Model Design
• Nuclear Engineering
• Statistical Techniques
• Petroleum Engineering
• Physics Engineering
• Production & Manufacturing
• Software Development
• Telecommunication Engineering

Publication Period

The Journal of Science, Technology and Engineering Research, a refereed international journal scanned in international indexes, is published twice a year (eISSN: 2717-8504), in June and December.

Publishing Language

Articles published in Turkish or English full text also include English title, abstract, key words and extensive summary.

Turkish or English abstracts should be written in Times New Roman font and in Italic form, 10 points, 11 fonts should be chosen for the main text. Single line spacing should be chosen in the writing of the abstract.

It should be noted that the abstract of the article should be at least 150 and at most 300 words.

It is recommended that Turkish and English abstracts should not exceed 1 page. The number of keywords should be at least 3 and at most 6.

Articles accepted for publication by the Editorial Board are read by language (Turkish, English) editors. The author (s) may be offered corrections to the writing of the article by the editorial board, referees or language editors during the evaluation of the articles. It is the authors' responsibility to make these corrections.

Each author submitting a manuscript must have and ORCID number. Visit https://orcid.org/signin to register for free.

NOTE : To download article templates, it is necessary to be a member of Dergipark platform.  https://dergipark.org.tr/en/login

1-  Extended Abstract Page

 An English "Extended Abstract" page should be prepared for all articles.

The template for the Comprehensive English Abstract is located on the first page of the template article provided in the links below.

2- Article Writing Template

Single column, 11 point, Times New Roman format is used for articles to be published in our journal.

The article template in  Word format     /    PDF format   

NOTE : If you are having trouble downloading templates through the Dergipark system, please contact  jster.editor@gmail.com.

We expect you to use articles related to your subject published in our JSTER journal and use them as references in your article.

3- Reference Layout

- APA or IEEE formats should be selected as the reference format.

APA Example:
Pany, C. (2021). Structural Analysis of Metallic Pressure Vessels With Weld Sinkage in the Circumferential Joint. Journal of Scientific, Technology and Engineering Research, 2 (1), 4-10. DOI: 10.5281 / zenodo.4586360

IEEE Example:
C. Pany, "Structural Analysis of Metallic Pressure Vessels With Weld Sinkage in the Circumferential Joint", Journal of Scientific, Technology and Engineering Research, c. 2, the number. 1, ss. 4-10, Jun. 2021, doi: 10.5281 / zenodo.4586360

4- Click to download the Author Copyright Form.

https://dergipark.org.tr/tr/download/journal-file/22112

All authors must sign the copyright form, scan it and upload it to the system at the article submission stage.

5- Plagiarism Control  /  Similarity Ratio File:

The full text of your article, including the references section, must be scanned with "iThenticate" or "Turnitin" programs, and the result of the similarity ratio to be obtained from the relevant program must be uploaded to the system in PDF format.

The article file to be sent to JSTER by the authors should be screened for plagiarism (similarity) through similarity scanning programs.

Plagiarism screening should be performed by excluding “citations, parts of text with less than 5 words of overlap, and references part”. In the detailed report obtained as a result of the similarity scan, the similarity rate should be at most 20% or less. In addition, the similarity rate from single work should never exceed 5%.

Articles above this rate, after providing similarity under %20 then will be considered.
Articles accepted as a result of peer-review whichever one of the mentioned similarity programs is used, it should be noted that the similarity rate should not be over 20%.

When uploading the plagiarism similarity report file to the system, the phrase "Similarity Report" should be written in the file name section. You can upload the plagiarism (similarity) report file to the system as an additional file.

Before the article is submitted, you can check the originality using the "plagiarism control" software listed below:

• https://www.turnitin.com
• Küçük SEO Araçları
  Motor Arama Raporları
  Dupli Denetleyicisi
  Plagiarisma
  Plag Tarama
  Citation Makinası
  BibMe
  

JSTER PUBLICATION POLICY

Journal of Science, Technology and Engineering Research (JSTER); It is an open access, online, peer-reviewed academic journal .

JSTER ETHICAL PRINCIPLES

JSTER Journal; Being aware of the fact that information should be easily accessible in order to advance scientific studies, the refereed journal literature in the Budapest Open Access Declaration supports the initiative of open access and presents all published articles free of charge in an environment that everyone can read and download. These open access policies adopted by our editorial board, adopted on September 12, 2012, can be accessed at http://www.budapestopenaccessinitiative.org/boai-10-translations/turkish-translation.

Refereed articles are studies that ensure the application of the scientific method and impartiality. Publishing an article in a refereed journal is an important building block in developing a consistent and respected information network. It is a direct reflection of the quality of work of the author and the institutions that support them. Refereed articles support and embody the scientific method.
All parts of the publishing process in the realization of scientific production; publishers, editors, authors, reviewers and readers must comply with ethical principles. In this context, the publication ethics of Ankara University Faculty of Education Journal and the open access policy are also in line with the guidelines and policies published by the Committee on Publication Ethics (COPE) in open access (For example, the Code of Ethics (COPE) Code of Conduct and The Best Practice Guidelines for Journal Editors; “Code of Conduct and Best Practice Guidelines for Journal Editors” and “COPE Best Practice Guidelines for Journal Editors” require that all components of the publishing process comply with ethical principles.

Therefore, it is expected from all stakeholders to provide expected ethical standards of ethics. Ethical issues to be considered in publishing:

Article Authors' Ethical Responsibilities:

• The author of the article: Authorship should be limited to those who make significant contributions to the design, design, execution, or interpretation of the reported work. Transparency about the contributions of the authors is documented by the Copyright and Author Agreement..

• Originality and plagiarism: Authors should ensure that they write entirely original works, and when the authors use others' works and / or words, this is properly quoted or quoted.
• Data access and retention: Authors may be asked to provide raw data associated with an article for editorial review and must be ready to provide access to such data.
• Multiple, unnecessary or simultaneous broadcasts: An author should generally not publish articles describing the same research in more than one journal or primary publication.
• Sources approval: Appropriate approval of the work of others should always be given.
• Disclosure and conflicts of interest: All applications should include disclosure of all relationships that could be viewed as a potential conflict of interest.
• Basic mistakes in published works: When an author finds a significant error or mistake in his own work, he is obliged to notify the journal editor or publisher immediately and contact the editor to withdraw or correct the article.
• Human or animal rights: To ensure compliance with national and international laws and guidelines for all studies involving human or animal subjects (for example, WMA Helsinki Declaration, NIH Laboratory Animal Policy, EU Directive on Animal Use), to confirm that the necessary approvals have been obtained. respect. To specify the relevant ethics committee approvals and research details regarding his work in the “Materials and Methods” section of the study.

Ethical Responsibilities of Referees
• To contribute to the editor's decision making process, review the article objectively in time and agree to evaluate only the studies related to his area of expertise.
• To make the assessment objectively only in relation to the content of the study. To evaluate the work without considering religious, political and economic interests.
• Providing guidance to help improve the quality of the article to be published and scrutinizing the study. Communicating your comments to the author in a constructive and kind language.
• To protect the confidentiality of the information provided by the editor and the author, to destroy the study he / she examined in accordance with the principle of confidentiality after the evaluation process, to inform the editor if there is a situation against the blind peer review and not to evaluate the study.
• Be aware of potential conflicts of interest (financial, institutional, collaborative, or other relationship between the author and the author), and warn the editor to retract their help for this article if necessary.

Editors' Ethical Duties and Responsibilities
• Acting in a balanced, objective and fair manner while performing their duties without discriminating on gender, religious or political beliefs, ethnic or geographical origins of the authors.
• To evaluate the works sent to the journal according to its content, not to privilege any author.
• To take necessary measures to prevent possible conflicts of interest and to evaluate existing statements, if any.
• To handle sponsored works or works on special topics in the same way as other works,
• In the event of an ethical complaint, to follow the journal's policies and procedures and to apply the necessary procedures. To give the authors an opportunity to respond to the complaint, not to refuse to apply the necessary sanctions regardless of who the study belongs to.
• If the journal does not comply with its purpose and scope, to refuse the work.

All articles in the "Journal of Science, Technology and Engineering Research -JSTER" (e-ISSN: 2717-8404) are published with an open access model.

Since its establishment in 2020, JSTER has been carrying out the journal secretariat, editorial and referee processes on volunteerism.
In the journal; Article submission fee, Editorial Processing Fee are not charged and waived from those who request for studies whose first author is master and doctoral students. For this, a request letter must be written.

For other works, a publication fee may be requested to cover the works given in the Secretariat services as Publication Fee.