Farklı Üretim Tekniklerinin PVA Esaslı Yeşil Kompozit Membranların Gaz Ayırma Özelliklerine Etkisi

Tuğba Mutuk; Taha Yağız Keskin; Hülya Aykaç Özen

doi:10.31466/kfbd.1558555

EN TR

Effect of Different Production Techniques on Gas Separation Properties of PVA Based Green Composite Membranes

Abstract

In this study, the gas separation properties of polyvinyl alcohol (PVA) based and banana fiber added green composite membranes were investigated. PVA, which is an environmentally friendly and biodegradable polymer, was used in membrane production, and banana fiber was preferred as the main reinforcement material. Banana fibers are a natural material that can be utilized as waste and contributed to the thermal, mechanical and gas permeability properties of the composites. Two different production methods were used in the study, namely the casting method and the electrospray deposition method. The effects of these methods on the microstructure and gas separation performance of PVA based composite membranes were compared. Gas permeability and CO2/N2 separation tests, the banana fiber contribution ratio (wt. 1%, 3%, 5%) and the production method were analyzed. It was shown that the membranes produced by the electrospray method, especially the composite membranes with wt. 5% banana fiber added, had the highest CO2 permeability values. In addition, it was determined that the membranes obtained by the electrospray method had a more porous structure compared to the casting method and therefore increased gas permeability. However, in terms of selectivity, the highest CO2/N2 selectivity was obtained in pure PVA membranes. Increasing the banana fiber content improves the pore structure, but may negatively affect selectivity. This study has made significant contributions in terms of sustainable and natural material use in carbon capture technologies and has revealed that PVA-based green composites have potential for future industrial applications.

Keywords

Electrspray deposisition , Green composite , Membrane , Gas seperation

Farklı Üretim Tekniklerinin PVA Esaslı Yeşil Kompozit Membranların Gaz Ayırma Özelliklerine Etkisi

Öz

Bu çalışmada polivinil alkol (PVA) esaslı ve muz lifi katkılı yeşil kompozit membranların gaz ayırma özellikleri incelenmiştir. Membran üretiminde, çevre dostu ve biyolojik olarak parçalanabilir bir polimer olan PVA kullanılmış, ana takviye malzemesi olarak ise muz lifi tercih edilmiştir. Muz lifleri atık olarak değerlendirilebilen doğal bir malzeme olup, kompozitlerin termal, mekanik ve gaz geçirgenlik özelliklerine katkıda bulunmuştur. Araştırmada döküm yöntemi ve elektrosprey biriktirme yöntemi olmak üzere iki farklı üretim yöntemi kullanılmıştır. Bu yöntemlerin, PVA esaslı kompozit membranların mikroyapısına ve gaz ayırma performansına olan etkileri karşılaştırılmıştır. Gaz geçirgenliği ve CO2/N2 gaz ayrımı testlerinde muz lifinin katkı oranının (ağ.%1, %3, %5) ve üretim yönteminin etkisi analiz edilmiştir. Elektrosprey biriktirme yöntemiyle üretilen membranların, özellikle ağ.%5 muz lifi katkılı kompozit membranların, CO2 geçirgenlik değerlerinin en yüksek olduğunu göstermiştir. Ayrıca, elektrosprey biriktirme yöntemiyle elde edilen membranların, döküm yöntemine göre daha gözenekli bir yapıya sahip olduğu ve bu nedenle gaz geçirgenliğini artırdığı tespit edilmiştir. Ancak, seçicilik açısından bakıldığında, en yüksek CO2/N2 seçiciliği saf PVA membranlarda elde edilmiştir. Muz lifi katkısının artırılması, gözenek yapısını iyileştirirken, seçiciliği olumsuz etkileyebilmektedir. Bu çalışma, karbon yakalama teknolojilerinde sürdürülebilir ve doğal malzeme kullanımı açısından önemli katkılar sunmuş ve PVA esaslı yeşil kompozitlerin gelecekteki endüstriyel uygulamalar için potansiyel taşıdığını ortaya koymuştur.

Anahtar Kelimeler

Elektrosprey biriktirme , Yeşil kompozit , Membran , Gaz ayrımı

References

Abdul Mannan, H., Mukhtar, H., Shima Shaharun, M., Roslee Othman, M., & Murugesan, T. (2016). Polysulfone/poly(ether sulfone) blended membranes for CO 2 separation. Journal of Applied Polymer Science, 133(5). https://doi.org/10.1002/app.42946
Ahmadi, R., Ardjmand, M., Rashidi, A., & Rafizadeh, M. (2020). High performance novel nanoadsorbents derived - natural cellulose fibers for superior CO 2 adsorption and CO 2 / CH 4 separation. Energy Sources, Part a: Recovery, Utilization, and Environmental Effects, 1–19. https://doi.org/10.1080/15567036.2020.1845878
Baker, R. W., & Low, B. T. (2014). Gas Separation Membrane Materials: A Perspective. Macromolecules, 47(20), 6999–7013. https://doi.org/10.1021/ma501488s
Beckermann, G. W., & Pickering, K. L. (2008). Engineering and evaluation of hemp fibre reinforced polypropylene composites: Fibre treatment and matrix modification. Composites Part a: Applied Science and Manufacturing, 39(6), 979–988. https://doi.org/10.1016/j.compositesa.2008.03.010
Bledzki, A. (1999). Composites reinforced with cellulose based fibres. Progress in Polymer Science, 24(2), 221–274. https://doi.org/10.1016/S0079-6700(98)00018-5
Chen, H., Dai, F., Wang, M., Yan, X., Ke, Z., Chen, C., . . . Yu, Y. (2022). Preparation and gas separation properties of spirobisbenzoxazole-based polyimides. European Polymer Journal, 173, 111231. https://doi.org/10.1016/j.eurpolymj.2022.111231
DOE/EIA-0383 (2008). Annual Energy Outlook: Report.
Douna, I., Farrukh, S., Hussain, A., Salahuddin, Z., Noor, T., Pervaiz, E., . . . Fan, X. F. (2022). Experimental investigation of polysulfone modified cellulose acetate membrane for CO2/H2 gas separation. Korean Journal of Chemical Engineering, 39(1), 189–197. https://doi.org/10.1007/s11814-021-0900-7
Duan, K., Wang, J., Zhang, Y., & Liu, J. (2019). Covalent organic frameworks (COFs) functionalized mixed matrix membrane for effective CO2/N2 separation. Journal of Membrane Science, 572, 588–595. https://doi.org/10.1016/j.memsci.2018.11.054
Fang, J., Niu, H., Lin, T., & Wang, X. (2008). Applications of electrospun nanofibers. Science Bulletin, 53(15), 2265–2286. https://doi.org/10.1007/s11434-008-0319-0

Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008). Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program. International Journal of Greenhouse Gas Control, 2(1), 9–20. https://doi.org/10.1016/S1750-5836(07)00094-1
Freeman, B. D. (1999). Basis of Permeability/Selectivity Tradeoff Relations in Polymeric Gas Separation Membranes. Macromolecules, 32(2), 375–380. https://doi.org/10.1021/ma9814548
Gu, J., Li, J. J., Sun, Y. P., Zhang, L., & Chen, H. (2013). Progresses in the modification and application of poly (vinyl alcohol) membrane.: Chemical Industry and Engineering Progress,, 32(5), 1074-1080.
Haszeldine, R. S., Flude, S., Johnson, G., & Scott, V. (2018). Negative emissions technologies and carbon capture and storage to achieve the Paris Agreement commitments. Philosophical Transactions. Series A, Mathematical, Physical, and Engineering Sciences, 376(2119). https://doi.org/10.1098/rsta.2016.0447
IPCC (2005). Carbon Dioxide Capture and Storage ([Summary version]). Cambridge: Cambridge UP.
Kabir, M. M., Wang, H., Lau, K. T., Cardona, F., & Aravinthan, T. (2012). Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites. Composites Part B: Engineering, 43(2), 159–169. https://doi.org/10.1016/j.compositesb.2011.06.003
Kalia, S., Kaith, B. S., & Kaur, I. (2009). Pretreatments of natural fibers and their application as reinforcing material in polymer composites—A review. Polymer Engineering & Science, 49(7), 1253–1272. https://doi.org/10.1002/pen.21328
Khan, A. L., Li, X., Ilyas, A., Raza, M. T., & Vankelecom, I. F.J. (2016). Novel sulfonated and fluorinated PEEK membranes for CO2 separation. Separation and Purification Technology, 167, 1–5. https://doi.org/10.1016/j.seppur.2016.04.037
Kumar, V., Chakraborty, P., Janghu, P., Umesh, M., Sarojini, S., Pasrija, R., . . . Sivalingam, A. M. (2023). Potential of banana based cellulose materials for advanced applications: A review on properties and technical challenges. Carbohydrate Polymer Technologies and Applications, 6, 100366. https://doi.org/10.1016/j.carpta.2023.100366
Lai, C.-L., Chen, J.-T., Fu, Y.-J., Liu, W.-R., Zhong, Y.-R., Huang, S.-H., . . . Lee, K.-R. (2015). Bio-inspired cross-linking with borate for enhancing gas-barrier properties of poly(vinyl alcohol)/graphene oxide composite films. Carbon, 82, 513–522. https://doi.org/10.1016/j.carbon.2014.11.003
Lee, B., Kamiya, N., Machida, S., Yamagata, Y., Horie, K., & Nagamune, T. (2003). Fabrication of a protein film by electrospray deposition method and investigation of photochemical properties by persistent spectral hole burning. Biomaterials, 24(12), 2045–2051. https://doi.org/10.1016/S0142-9612(02)00637-3
Markusson, N., & Chalmers, H. (2013). Characterising CCS learning: The role of quantitative methods and alternative approaches. Technological Forecasting and Social Change, 80(7), 1409–1417. https://doi.org/10.1016/j.techfore.2011.12.010
Mondal, A., & Mandal, B. (2014). CO2 separation using thermally stable crosslinked poly(vinyl alcohol) membrane blended with polyvinylpyrrolidone/polyethyleneimine/tetraethylenepentamine. Journal of Membrane Science, 460, 126–138. https://doi.org/10.1016/j.memsci.2014.02.040
Mutuk, T., Arpacıoğlu, K., Alışır, S., & Demir, G. (2023). Thermal and mechanical evaluation of natural fibers reinforced gypsum plaster composite. Journal of Metals, Materials and Minerals, 33(1), 116–123. https://doi.org/10.55713/jmmm.v33i1.1669
Özen, H. A., & Ozturk, B. (2019). Gas separation characteristic of mixed matrix membrane prepared by MOF-5 including different metals. Separation and Purification Technology, 211, 514-521.
Özen, H. A., & Öztürk, B. (2020). Hydrogen Permeability of Mixed Matrix Membranes Containing Metal Doped MOF-5. Emerging Materials Research, 9(1), 1–4. https://doi.org/10.1680/jemmr.18.00090
Pickering, K. L., Beckermann, G. W., Alam, S. N., & Foreman, N. J. (2007). Optimising industrial hemp fibre for composites. Composites Part a: Applied Science and Manufacturing, 38(2), 461–468. https://doi.org/10.1016/j.compositesa.2006.02.020
Razmgar, K., & Nasiraee, M. (2022). Polyvinyl alcohol ‐based membranes for filtration of aqueous solutions: A comprehensive review. Polymer Engineering & Science, 62(1), 25–43. https://doi.org/10.1002/pen.25846
Sapalidis, A. A. (2020). Porous Polyvinyl Alcohol Membranes: Preparation Methods and Applications. Symmetry, 12(6), 960. https://doi.org/10.3390/sym12060960
Shervani, S., Tansug, L. P., & Tezel, F. H. (2024). Microporous Adsorbent-Based Mixed Matrix Membranes for CO2/N2 Separation. Energies, 17(8), 1927. https://doi.org/10.3390/en17081927
Shibata, S., Cao, Y., & Fukumoto, I. (2005). Press forming of short natural fiber-reinforced biodegradable resin: Effects of fiber volume and length on flexural properties. Polymer Testing, 24(8), 1005–1011. https://doi.org/10.1016/j.polymertesting.2005.07.012
Singh, J., & Dhar, D. W. (2019). Overview of Carbon Capture Technology: Microalgal Biorefinery Concept and State-of-the-Art. Frontiers in Marine Science, 6. https://doi.org/10.3389/fmars.2019.00029
Türkiye İstatistik Kurumu, T. (2023). Sera Gazı Emisyon İstatistikleri, 1990-2021: Alıntı: https://data.tuik.gov.tr/Bulten/Index?p=Sera-Gazi-Emisyon-Istatistikleri-1990-2021-49672.
Weng, T.-H., Tseng, H.-H., & Wey, M.-Y. (2010). Fabrication and characterization of poly(phenylene oxide)/SBA-15/carbon molecule sieve multilayer mixed matrix membrane for gas separation. International Journal of Hydrogen Energy, 35(13), 6971–6983. https://doi.org/10.1016/j.ijhydene.2010.04.024
Yılmaz, S. Y., Özen, H. A., & Geyikçi, F. (2023). Experimental and factorial study on gas separation properties of PLA-based green composite membranes. Korean Journal of Chemical Engineering, 40(12), 2965–2974. https://doi.org/10.1007/s11814-023-1557-1

Details

Primary Language

Turkish

Subjects

Air Pollution and Gas Cleaning , Materials Science and Technologies , Polymers and Plastics

Journal Section

Research Article

Authors

Tuğba Mutuk ^*
0000-0003-0143-2721
Türkiye

Taha Yağız Keskin
0009-0005-5509-2373
Türkiye

Hülya Aykaç Özen
0000-0003-4990-6682
Türkiye

Publication Date

December 15, 2024

Submission Date

September 30, 2024

Acceptance Date

November 30, 2024

Published in Issue

Year 2024 Volume: 14 Number: 4

DOI

https://doi.org/10.31466/kfbd.1558555

IZ

https://izlik.org/JA47TS23BZ

APA

Mutuk, T., Keskin, T. Y., & Aykaç Özen, H. (2024). Farklı Üretim Tekniklerinin PVA Esaslı Yeşil Kompozit Membranların Gaz Ayırma Özelliklerine Etkisi. Karadeniz Fen Bilimleri Dergisi, 14(4), 2290-2301. https://doi.org/10.31466/kfbd.1558555

Cited By

Defect-mediated multifunctional behavior in Cu-doped BaTiO3: tunable superparamagnetism-like response, piezoelectricity, and optical absorption for next-generation magnetoelectric devices

Journal of Materials Science: Materials in Electronics

https://doi.org/10.1007/s10854-026-17317-6

The published articles in The Black Sea Journal of Sciences are licensed under Creative Commons Attribution-NonCommercial 4.0 International