Mechanical and Thermal Characterization of Basalt and Hemp Fiber Reinforced Polylactide (PLA) Based Hybrid Bio-Composites
Abstract
Developing sustainable and eco-composites using matrix polymers and natural reinforcements from renewable resources or agro wastes has gained significant attention recently. In this context, biodegradable polylactide (PLA) polymer, basalt fiber (BF) - recognized as one of the green materials of this century - and hemp fiber (HF), which is increasingly valued globally and nationally, are promising candidates for inclusion in such composites. This study aims to create PLA-based hybrid biocomposites reinforced with BF and HF, investigating their mechanical, thermal, and morphological properties. The hybrid bio-composites with varying BF and HF contents (5-20%) were fabricated via melt mixing and subsequently shaped through injection molding by relevant test standards. The mechanical properties of the composites were assessed through tensile and hardness tests, thermal properties through the TGA, and morphological features through the SEM analysis. While adding 10% BF and HF in PLA showed the hybrid effect, a considerable improvement in mechanical properties was recorded, especially with a 15% increase in tensile strength. This research will optimize fiber ratios and processing parameters to enhance PLA bio composites' mechanical and thermal performance, thereby expanding the potential functional applications of PLA biopolymers.
Keywords
Hybrid Bio-composite, Polylactide, Basalt Fiber, Hemp Fiber, Mechanical Characterization, Thermal Characterization
Supporting Institution
The Scientific and Technological Research Council of Türkiye (TÜBİTAK)
Project Number
1919B012304512
Ethical Statement
The authors declare that this study complies with Research and Publication Ethics.
Thanks
This study was supported by TUBITAK 2209-A University Students Research Projects Support Program under application no. 1919B012304512.
References
- Aliotta, L., Gigante, V., Coltelli, M.-B., Cinelli, P., Lazzeri, A., and Seggiani, M. (2019). Thermo-mechanical properties of PLA/short flax fiber biocomposites. Applied Sciences, 9(18), 3797.
- ASTM D638: 1993. Standard test method for tensile properties of plastics., American Society for Testing and Materials, USA.
- Ayyampilli, S. P., and Suresh, R. (2025). Study on mechanical and flammability properties of natural fibre polymer composites. Green Materials, 1-11.
- Bajpai, P. K., Singh, I., and Madaan, J. (2014). Development and characterization of PLA-based green composites:A review. Journal of Thermoplastic Composite Materials, 27(1), 52-81.
- Bhat, T., Fortomaris, D., Kandare, E., and Mouritz, A. P. (2017). Properties of thermally recycled basalt fibres and basalt fibre composites. Journal of Materials Science, 53(3), 1933-1944.
- Both, A. K., Helle, M. A., Madireddy, G., and Cheung, C. L. (2021). Green chemical approach to fabricate hemp fiber composites for making sustainable hydroponic growth media. ACS Agricultural Science & Technology, 1(5), 499-506.
- Celik, E., Uysal, M., Gumus, O. Y., and Tasdemir, C. (2025). 3D-Printed Biocomposites from Hemp Fibers Reinforced Polylactic Acid: Thermal, Morphology, and Mechanical Performance. BioResources, 20(1).
- Çevik Elen, N., Yıldırım, M., and Kanbur, Y. (2025). Examining the mechanical and biodegradable characteristics of hemp fiber added PLA bio-composites with various modifications. Journal of Thermoplastic Composite Materials, 08927057251316234.
- Deng, H., Wei, X., Wang, C., Yang, J., and Li, Z. (2021). Effects of cryogenic treatment and interface modifications of basalt fibre on the mechanical properties of hybrid fibre-reinforced composites. e-Polymers, 21, 625–635.
- Dincer, U., Karsli, N. G., Sahin, T., and Yilmaz, T. (2024). Analysis of the effect of boric acid and compatibilizer addition to polylactic acid/basalt fiber composites. Polymer Composites, 45(16), 15005-15019.
