Middle East Journal of Science

Middle East Journal of Science (MEJS) established in 2015. It is a peer –reviewed international journal to be of interest and use to all those concerned with research in various fields of, or closely related to, Science &Technology disciplines. Middle East Journal of Science (MEJS) aims to provide a highly readable and valuable addition to the literature which will serve as an indispensable reference tool for years to come. The coverage of the journal includes all new theoretical and experimental findings in the fields of Science &Technology or any closely related fields. The journal also encourages the submission of critical review articles covering advances in recent research of such fields as well as technical notes.

The scopes include but are not limited to:

• Physics
• Mathematics
• Biophysics
• Medical Physics    
• Chemistry
• Engineering
• Biochemistry  
• Biology
• Microbiology
• Molecular Biology
• Hydrobiology            
• Agriculture
• Environmental Studies
• Science Education
• Genetics
• Ecology
• Spectroscopy
• Statistics and Probability
• Biotechnology
• Geology

Instructions for Authors

MANUSCRIPT PREPARATION

Please read all of the following manuscript preparation instructions carefully and in their entirety. The manuscript must be in good scientific English; this is the author's responsibility.

All authors must have read and approved the most recent version of the manuscript.
Manuscripts can only be submitted through the Middle East Journal of Science.
Manuscripts submitted via any other medium will not be processed.
Manuscripts submitted to the Middle East Journal of Science will first go through a technical evaluation process where the editorial office staff will ensure that the manuscript has been prepared and submitted in accordance with the journal’s guidelines.
Submissions that do not conform to the journal’s guidelines will be returned to the submitting author with technical correction requests.
The journal management requires that all authors register to ORCID at http://orcid.org/register and get a free ORCID ID.
All submissions are screened by similarity detection software.
We are using the iThenticate plagiarism solution and our maximum allowed score, for the document in which the Materials and Methods and References sections truncated, is 20%. Higher scores are not allowed and the author will be given the plagiarism report and the manuscript will be returned to the authors.

You may download the Manuscript Template (Sample) here.

MANUSCRIPT STRUCTURE

Font
Manuscripts must be prepared as a Microsoft Word file.
Word document, Times New Roman, 11 points, 1,3 points line space.
Page margins are 2.5 for all sides.

Length
The maximum length for articles is 20 pages.

Title
A concise title of the paper.
Use bold 11-point Times Roman font.
Use uppercase for the title.
Make the title is centered.

Name(s) and surname(s) of author(s)
Use centered, bold, italic, 11-point Times Roman font.
Affiliation(s) of author(s)
Use 10-point Times Roman font.
E-mail address of the corresponding author (Use 10-point Times Roman font)
ORCID(s) of author(s) (Use 10-point Times Roman font)
The journal management requires that all authors register to ORCID at https://orcid.org/register  and get a free ORCID ID.

Abstract
Each article must include an abstract, of up to 250-300 words, that highlights the objectives, methods, results, and conclusions of the paper. The abstract should state briefly the purpose of the research, the principal results, and major conclusions.
The abstract body is typed in Times New Roman, italic, 11 pt.
Keywords
Maximum 5 characteristic words explaining the subject of the paper (avoid, for example “of”, “and” ...) - separated by commas and typed Word Style in Times New Roman, italic, 11 pt.

Subheadings
Use bold, lowercase, 11 Times New Roman font for headings.

Introduction
This should define the problem and, if possible, the frame of existing knowledge.

Materials and Methods
Materials and methods should be clearly presented.

Results and Discussion
Results should be clear and concise and give the significance of the results of the work. Data must not be repeated in figures and tables.
The discussion should interpret the results in reference to the problem outlined in the introduction and of related observations by the author/s or others.

Conclusion
A conclusion should be added if results and discussion are combined.

Tables and Figures
Numerated figures and tables, have to be implemented in the text, and obviously behind the paragraph in which they have been mentioned. Tables should have a short descriptive title.
The unit of measurement used in a table should be stated.
Tables should be numbered consecutively.
Figures should be prepared in GIF, TIFF, JPEG, or PowerPoint.
Tables and Figures should be appropriately cited in the manuscript.
Acknowledgments
Acknowledgments of financial support, advice, or other kinds of assistance should be given at the end of the text under the heading "Acknowledgements". The names of funding organizations should be written in full.

Ethical statement:

Ethics Committee approval number and date is required if the work involves chemicals, procedures, or equipment that have any unusual hazards inherent in their use, or if it involves the use of animal, human or environmental subjects. This information should be highlighted both in the Methods section and at the end of the article.

Conflict of interest:
The authors must notify any conflicts of interest.
Authors’ Contributions:
All authors mentioned in the paper must have significantly contributed to the research. The level of their contribution also must be defined at the end of the article.

References
Use IEEE style for references. 
References should be numbered in brackets in the order of appearance in the text, e.g. [1], [3, 4], [7-11], etc. The full references should be listed at the end of the paper (left alignment) in the numerical order of citation in the text.

Data in references should be given in the following form:

For Journals:
Surname, N.N., Surname, N.N., “The full title of the article”, Journal Name, volume and issue, first and last page, year. DOI number.
Sample:
Kentli, F., Yilmaz, M., “Mathematical modeling of a two-axis photovoltaic system with improved efficiency”, Journal of Physical Chemistry, 4(2), 40-43, 2015. Doi:
For Books

Surname, N.N., Surname, N.N., The full title of the book, Publisher's Name, City, Year.

Sample:
Gumz, W., Gas Producers and Blast Furnaces, John Wiley and Sons Inc., New York, 2008.
For Chapters
Sinak, Y., Models and Projections of Energy Use in the Soviet Union, in: International Energy Economics (Ed. T. Steiner), Champan and Hall, London, pp. 1-53, 1998.
For Proceedings (Transactions, Book of abstracts, Proceedings on CD, etc.)
Gabrielsson, J., “Extract-Air Window: a Key to Better Heat Economy in Buildings”, Proceeding of 10th World Energy Conference, Istanbul, Turkey, Vol. 1, 1997, pp. 21-28
For Thesis
Rowe, V. M., Some Secondary Flow Problems in Fluid Dynamics, Ph. D. thesis, Cambridge University, Cambridge, UK, 1966
For Reports
Tsuji, Y., Shen, N. Y., Numerical Simulation of Gas-Solid Flows: I – Particle-to-Wall Collision, Report No. 62, Osaka University, Osaka, Japan, 1989
For literature or data on websites and documents without authors
International Engineering, Science and Education Group, http://www.inesegconferences.org

Middle East Journal of Science (MEJS) is committed to following the Code of Conduct and Best Practice Guidelines of COPE (Committee on Publication Ethics). It is the duty of our editors to follow Cope Guidance for Editors and our peer-reviewers must follow COPE Ethical Guidelines for Peer Reviewers. We expect all prospective authors to read and understand our Ethics Policy before submitting any manuscripts to our journals.

Please note that submitted manuscripts may be subject to checks using the iThenticate service, in conjunction with CrossCheck, in order to detect instances of overlapping and similar text.

The iThenticate software checks submissions against millions of published research papers, documents on the web, and other relevant sources. If plagiarism or misconduct is found, consequences are detailed in the policy.

We expect all authors to read and understand our ethics policy before submitting it to our journal. This is in accordance with our commitment to the prevention of ethical misconduct, which we recognize to be a growing problem in academic and professional publications. It is important to note that most incidents of plagiarism, redundant publication, copyright infringement or similar occur because of a lack of understanding, and not through fraudulent intent. Our policy is one of prevention and not persecution.

Authors’ Responsibilities

Authors should:

Ensure that all researched work submitted is original, fully referenced and that all authors are represented accurately. The submission must be exclusive and not under consideration elsewhere.

Provide accurate contact details for a designated corresponding author, who shall be deemed by the publisher and editor as fully responsible for the authorship of the paper and all communications concerning the ethical status and originality of the paper. This includes any queries or investigations that may arise, pre-or post-publication.

Expect to formally agree with publication terms that define the author and the publisher's rights for the work. Visit our website for further information and fulfill the Copyright Declaration Form.

Expect the editor to scan submissions using plagiarism detection software at iThenticate to check a paper's originality before sending it out for review.

The articles should include a statement about the compliance of Research and Publication Ethics.

Hazards and human or animal subjects: Ethics Committee approval number and date is required if the work involves chemicals, procedures, or equipment that have any unusual hazards inherent in their use, or if it involves the use of animal or human subjects. This information should be highlighted both in the Methods section and at the end of the article.

iThenticate Plagiarism Resources: http://www.ithenticate.com/resources/6-consequences-of-plagiarism

Fully correspond and comply with the editor and publisher in any requests for source data, proof of authorship, or originality in a timely manner, providing a reasonable explanation for discrepancies or failures to disclose vital information.

Fully co-operate with any consequent investigations if the editor and/or publisher are dissatisfied with the evidence available or the explanations provided.

Expect transparency, efficiency, and respect from the publisher and the editor during the submissions process.

Remain in good communication with both the publisher and the editor.

Co-operate fully with the publication of errata and with the retraction of articles found to be unethical, misleading, or damaging.

Remain in good communication with the editor(s), the publisher, and any co-authors.

Editors’ Responsibilities

Editors should:

Read and understand COPE guidelines as well as MEJS's ethics policy, and follow them during all editorial processes.

Protect the reputation of their journal(s) and published work by only publishing content of the highest quality and relevance in a timely and responsible manner.

Carry out thorough, objective, and confidential peer review for original article submissions that pass the initial quality check and editorial assessment, in adherence with COPE guidelines and MEJS' ethics policy.

The detail and justify any article types which will not be peer-reviewed (e.g. editorials, opinion pieces, etc.).

Provide a transparent review and publication process as far as is possible, with full respect and care paid to the author(s).

Provide advice and give reasonable explanations and updates to authors during the submissions process and once a decision has been made.

Allow authors the right to appeal any editorial decision.

Only accept papers based on the original merit, quality, and relevance of their content.

Support authors in queries concerning the originality of their submissions and request the support of MEJS if necessary.

Remain in good communication with both the publisher and the author(s).

Reviewers’ Responsibilities

Reviewers should:

Adhere to MEJS’s policy of confidential peer review of their journals. This includes, but is not restricted to, keeping their identity hidden from authors and not externally distributing any work that is passed to them for their eyes only.

Only accept invitations to review work that is relevant to their own expertise and specialty.

Review submitted work in a responsible, impartial, and timely manner.

Report any suspected ethical misconduct as part of a thorough and honest review of the work.

Avoid the use of unnecessarily inflammatory or offensive language in their appraisal of the work.

Accept the commitment to review future versions of the work and provide 'follow up’ advice to the editor(s), if requested.

Seek advice from the editor if anything is unclear at the time of invitation.

Remain in good communication with both the publisher and the editor.

MEJS’s Responsibilities
MEJS will:

Protect the reputation of our journal and published work by only publishing content of the highest quality and relevance in a timely and responsible manner.

Provide detailed information concerning both our understanding of publication ethics and our implementation of the same. Emphasize a desire for prevention, not eventual detection, of ethical misconduct.

Uphold our COPE membership (or of such similar organizations) and keep our editorial offices, publishing staff and society partners up-to-date with their guidelines and policies, adapting our own where appropriate (and publicizing any update).

When necessary, request proof of originality/accuracy from the corresponding author of any work submitted to any of our journals.

Use plagiarism detection software when necessary for any submission to any journal at any stage of the submissions and publication process.

Provide a transparent submission and publication process, with full respect and care paid to the author. This includes detailed and dedicated instructions to authors for each journal, outlining referencing style, accepted article types, and submission processes.

Investigate thoroughly any suggestion of ethical misconduct detected during any stage of the submissions process. This can include but is not restricted to, the following: plagiarism, redundant publication, fabrication or misuse of data, and authorial disputes.

When necessary, retract articles that we deem to be unethical, misleading, or damaging.

When necessary, publish errata, corrigenda, and retractions in a timely and responsible fashion, detailing the decision online in an open-access format and publishing in print as soon as possible.

Remain in good communication with editors, authors, reviewers, and society partners (where applicable).

Further reading

Authorship of the Paper: Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.

Originality and plagiarism: The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.

Data access and retention: Authors may be asked to provide the raw data in connection with a paper for editorial review, and should be prepared to provide public access to such data.

Multiple, redundant, or concurrent publication: An author should not, in general, publish manuscripts describing essentially the same research in more than one journal or primary publication. MEJS does not view the following uses of a work as prior publication: publication in the form of an abstract; publication as an academic thesis; publication as an electronic preprint. Information on prior publication is included within each MEJS and its journal Guideline for Authors.

Disclosure and conflicts of interest: All submissions must include disclosure of all relationships that could be viewed as presenting a potential conflict of interest. The authors must notify the Editors of any conflicts of interest.

Authors’ Contributions:
All Authors mentioned in the paper must have significantly contributed to the research. The level of their contribution also must be defined at the end of the article.
For example: Percentage contributions are SB: 55%, TI: 15%, MCL:10%, JMO: 10%, JS: 10%. All authors read and approved the final manuscript.
Fundamental errors in published works: When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper.

Article Processing Charges (APCs): No

Submission Charges: No

Citation Indexes

	Index Copernicus
	CrossRef
	Google Scholar
	SciLit
	Science Library Index
	Scientific Indexing Services
	Journal Factor
	International Scientific Indexing
	TR Dizin
	DRJI
	idealonline

Other Indexes

Asian Science Citiation Index