Modal Analysis of a Clamped-Clamped U Frame Structure

Year 2019, , 657 - 665, 26.12.2019

Mesut Hüseyinoğlu Tayfun Abut

https://doi.org/10.18586/msufbd.637678

Cited By: 1

Abstract

Determining
of dynamic behaviours of the many machine elements used in the industry is an
important issue in terms of the safe operation of the structure and the
performance of the machine. Modal analysis method is widely used to determine
the dynamic properties of the structures. In this study, theoretical and
experimental modal analyses of a clamped-clamped U frame. Theoretical modal
analysis is performed using ANSYS programme. Experimental modal analysis is
performed with OROS Or36 vibration analyser and OROS modal analysis software.
The results obtained from experimental and theoretical studies were compared
and it was found that the model created in ANSYS successfully represented the
experimental model.

Keywords

Modal Analysis, Frame Structures, Finite Elements, Vibration Measurement

İki Ucu Ankastre U Çerçeve Yapının Modal Analizi

Abstract

Endüstride kullanılan birçok
makine elemanının dinamik davranışlarının belirlenmesi, yapının güvenli bir
şekilde çalışması ve makinenin performansı açısından oldukça önemli bir
konudur. Modal analiz tekniği yapıların dinamik özelliklerinin belirlenmesi
amacıyla yaygın bir şekilde kullanılmaktadır. Bu çalışmada iki ucu ankastre bir
U çerçeve yapının teorik ve deneysel modal analizleri gerçekleştirilmiştir.
Teorik modal analiz ANSYS programı kullanılarak yapılmıştır. Deneysel modal
analiz ise OROS Or36 titreşim analizörü ve OROS modal analiz yazılımı ile
gerçekleştirilmiştir. Deneysel ve teorik çalışmalardan elde edilen sonuçlar
karşılaştırılmış ve ANSYS’te oluşturulan modelin deneysel modeli başarılı bir
şekilde temsil ettiği görülmüştür.

Keywords

Modal Analiz, Çerçeve Yapılar, Sonlu Elemanlar, Titreşim Ölçümü

References

• Inman D.J. Engineering Vibration, Upper Saddle River New Jersey, 1997.
• Chen W.Q., Ding H.J. Natural frequencies of a fluid-filled anisotropic spherical Shell, The Journal of the Acoustical Society of America. 105 174-182, 1999.
• Dingand H.J., Chen W.Q. Nonaxisymmetric free vibrations of a spherically isotropic spherical shell embedded in an elastic medium, Int. J. Solids Struct. 33 2575-2590, 1996.
• Wu Y.C., Heyliger P. Free vibration of layered piezoelectric spherical caps, Journal of Sound and Vibration. 245 527-544, 2001.
• Lee J. Free vibration analysis of spherical caps by the pseudospectral method, Journal of Mechanical Science and Technology. 23 221-228, 2009.
• Krawczuk M., Ostachowicz W., Zak A. Modal analysis of cracked, unidirectional composite beam, Composites Part B: Engineering. 28 641-650, 1997.
• Maurinia C., Porfirib M., Pougeta J. Numerical methods for modal analysis of stepped piezoelectric beams, Journal of Sound and Vibration. 298 918-933, 2006.
• Yoo H.H., Chob J.E., Chung J. Modal analysis and shape optimization of rotating cantilever beams, Journal of Sound and Vibration. 290 223-241, 2006.
• Gao W. Interval natural frequency and mode shape analysis for truss structures with interval parameters, Finite Elements in Analysis and Design. 42 471-477, 2006.
• Xu Y.L., Zhang W.S. Modal analysis and seismic response of steel frames with connection dampers, Engineering Structures. 23 385-396, 2001.
• Chan S.L. Vibration and modal analysis of steel frames with semi-rigid connections, Engineering Structures. 16 25-31, 2003.
• Evins D.J. Modal Testing: Theory, Practice and Application, Research Studies Press Limited, Hertfordshire, 1984.
• Balke H. Einführung in die Technische Mechanik, Springer Verlag, Berlin, 1956.
• Saad Y. Iterative Methods for Sparse Linear Systems, PWS Publishing Company, Boston, 1996.
• Grafe H. Model updating of large structural dynamics models using measured response functions, PhD Thesis, Imperial College of Science, Technology and Medicine University of London, 1998.