Bu
çalışmada, iki adet özgün matkap kanal geometrisi tasarlanmış ve üretilmiştir.
Deneysel çalışmalarda ticari olarak tedarik edilebilen en yaygın iki takım
geometrisi (Geometri 1, Geometri 2) ile geliştirilen özgün iki kanal geometrisi
(Geometri 3, Geometri 4) performansları test edilmiştir. Takım geometrilerinin
delik delme performansı üzerindeki etkilerini araştırmak ve ideal işleme
parametrelerinin belirlemek için Taguchi deney tasarımı kullanılmıştır. Anova analizi
ile giriş parametrelerinin deney sonuçları üzerindeki etkisi istatistiksel
olarak bulunmuştur. Ayrıca Taguchi’nin Sinyal/Gürültü (S/G) analizi, yardımıyla
en iyi sonuç için kontrol faktörlerinin optimum seviyeleri belirlenmiştir.
In this study, two original drill channel geometries have been designed and produced. In the experimental studies , the performance of the two specific flute geometries (Geometry 3 , Geometry 4) developed by two very common tool geometries (Geometry 1, Geometry 2) was tested. Taguchi’s orthogonal array design of experiment was utilized to investigate the influence of the tool geometry on the drilling performance and to determine the optimal drilling parameters during experimental study. The effect of the input parameters on the experimental results was statistically determined by the Anova analysis. In addition, Taguchi's Signal / Noise (S / N) analysis has been used to determine optimal levels of control factors for best results.
Subjects | Engineering |
---|---|
Journal Section | Research Article |
Authors | |
Publication Date | December 1, 2017 |
Published in Issue | Year 2017 Volume: 5 Issue: 2 |