General Format Properties

Articles should be written in English using the Journal’s Manuscript Template.

Page Format
Main text font should be Times News Roman with size 10 pt. The line spacing should be set to 1.15, and page margins should be set to 2.5 cm (0.98 inch) on all sides. It should be prepared as a single column.
Paragraph Format
In the indents and spacing section of the paragraph tab, set the left and right indentation to 6pt (0.6 line) and the line spacing to 1.15.
Author Names
The author's surname must be written in uppercase. It is necessary to provide author affiliations and address details, including the university, faculty, and department.
Additionally, all authors must provide their email addresses and ORCID numbers. Graduate students must also declare their ORCID numbers.
Abstract
Each paper should have an abstract that concisely summarizes the motivation and aim, the main findings, and the conclusions of the submitted work. The abstract should not comprise less than 150 words and more than 300 words. Line spacing of the abstract should be set to 1.15. Times News Roman font with size 9 pt should be used. Abstract should consist of text only, with no tables, equations, abbreviations or references.
Keywords
Keywords should be listed in the left column. If a keyword consists of multiple words, only the first word starts with capital letter. Keywords should be different from the words in the title with 9 point size between 5 and 8.
Keywords Keywords1, Keywords2, Keywords3, Keywords4, Keywords5
Title of the Manuscript
The manuscript title should be written in 12-point Times New Roman font and in bold color. Except for conjunctions such as “and” and “with”, the first letter of each word in the title should be capitalized and the title should be aligned in the middle.
Main Section Headings
Main section headings, including 1. Introduction, 2. Materials and Methods, 3. Results and Discussion, and 4. Conclusion should be capitalized with the first letter of each word. They should be written 0.5 paragraphs from the left and numbered. The font size for main section headings should be 10 points.

Subheading
Subheadings should be capitalized with only the first word capitalized. They should be left-justified, indented 0.5 cm, bold, and italicized. Additionally, subheadings should be separated from the previous paragraph with a blank line.
2.1. Subsection title 1
2.2. Subsection title 2
2.3. Subsection title 3
…
Table and Figure Headings
Each table should be properly referred to in the text (Table 1). For citation of references, APA 6.0 style should be preferred as in (Author, 2023), (Author 1 and Author 2, 2023) and (Author 1 et al., 2023).
All figures must be referred to in the text (Figure 1.). Figures must have high resolution, readable legends and clear graphics. Table and Figure formats should be in the form shown in Journal’s manuscript template.
Units
SI unit system should be used in units of measurement. Decimal fractions should be indicated by a period rather than a comma (6.22 rather than 6,22). You may use (,) for thousands as in 1,550.67. For reciprocal units in fractions, use “Nm-2” instead of “N/m2”. Between value and its unit, leave a space such as 4 kg, 4 m. Degree, percent, etc. values should be written without space in between as in 4o, 4%.

Equations
All equations in the article should be numbered in consecutive order, and equation numbers should be located at the right margin as in (1). Equation should be properly referred to in the text only with equation number in paranthesis as (1). Please use Equation Editor of MS Word in writing equations. Make sure that symbols, numerals, etc. used in the main text have the same font type (Cambria Math) as in the equation, such as i_a or w_m in (1).
(di_a)/dt =v/L-R_a/L i_a-K_v/L w_m (1)


Text
The article should involve Introduction, Materials and Methods, Results and Discussion, and Conclusion sections. Introduction section should include motivation, aim and goals, a review of current studies, and contribution of the study. A note on organization of the article should also be provided in a final paragraph. If a specific model is used in the Methods section, the model subsection should include Sample/Study Group, Data Collection Tools and Process subsections.
The materials and methods used in the research should be stated clearly and understandably. In the results and discussion section; The results need to be discussed together with their place in the literature.
Acknowledgment
This work was supported (in part) by xxxxxxx, through research project xxxxxxx under research grant xxxxxxxx.
Ethics Permissions
In studies requiring ethics committee permission, information about the permission (committee name, date and issue number) should be given in the method section and also on the last page of the article.
Author Contributions
The contribution of the authors to the study should be stated.
Conflict of Interest
Authors must declare whether there is a conflict of interest.

References
References should be written in Times News Roman font with size 9 pt. References cited in the text should involve author's surname and the year of the publication in parentheses (Khan, 2020); (Kara and Savaş, 2000). Use “et al.” after the first author's surname for citations with three or more authors (Yilmaz et al., 2011).
In writing the cited references in the References list, APA format should be preferred. References should be listed alphabetically in author's surname. If same author has multiple references, chronological order should be applied. Full journal names should be used rather than their abbreviations. All journal article references should include volume, number, and page numbers. For web pages, please indicate the last accessed date of the available data. All references should be given in English.

Journal article:
Yilmaz, M. M., Serenbay, S. K., and Ibikli, E. (2011). On singular integrals depending on three parameters. Applied Mathematics and Computation, 218(3), 1132-1135.
Theses/Projects:
Khan, M. U. (2020). Robust adaptive type-2 neural fuzzy sliding mode control of a class of nonlinear systems. (Ph. D. Thesis) Gaziantep University the Institute of Natural and Applied Sciences, Gaziantep, Türkiye.
Kara, T., and Savaş M. C. (2020). Feedback Motion Control of an Electric Wheelchair. Gaziantep University BAP (MF.YLT.19.14) Project Report.
Books:
Brunton, S. L., and Kutz, J. N. (2022). Data-driven science and engineering: Machine learning, dynamical systems, and control. Cambridge University Press.
Book chapters:
Göğüş, F., Fadıloğlu, S., Soysal, Ç. (2010). Biological Oxidations: Enzymatic and Nonenzymatic Browning Reactions and Control Mechanisms . In Advances in Food Biochemistry 1st Ed. ( pp. 341-382)- USA: CRC Press Taylor and Francis Group.
Conference Proceedings (Full papers):
Khan, M. U., and Kara, T. (2019, October). An adaptive neural fuzzy sliding mode control scheme for rotational maneuvering and vibration suppression of a flexible spacecraft. In 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT) (pp. 1-6). IEEE.
Internet sources:
Anonymous (2023). World Food Programme, https://www.wfp.org/ending-hunger (Accessed date: 22 December 2023).
Artificial-Intelligence:
Authors who utilise AI tools in manuscript writing, image or graphic production, or data collection and analysis must transparently disclose in the Materials and Methods section of the paper the specific AI tool used and how it was used. The authors are fully responsible for the content of their manuscript, including any parts produced by an AI tool, and are therefore liable for any breach of publication ethics.
For example: Based on answers generated by ChatGPT (OpenAI, 2023)

References
Anonymous (2023). World Food Programme, https://www.wfp.org/ending-hunger (Accessed date: 22 December 2023).
Brunton, S. L., and Kutz, J. N. (2022). Data-driven science and engineering: Machine learning, dynamical systems, and control. Cambridge University Press.
Ercan, S. Ş., Bozkurt, H., and Aykaç, Ç. (2021). Impact of Proteolytic Enzymes on Formation of Biogenic Amine In Sucuk During the Storage Period. The Journal of Raw Materials to Processed Foods, 2(2), 63-72.
Göğüş, F., Fadıloğlu, S., Soysal, Ç. (2010). Biological Oxidations: Enzymatic and Nonenzymatic Browning Reactions and Control Mechanisms . In Advances in Food Biochemistry (pp. 341-382). USA: CRC Press Taylor and Francis Group.
Kara, T. and Savaş M. C. (2020). Feedback Motion Control of an Electric Wheelchair. Gaziantep University BAP (MF.YLT.19.14) Project Report.
Khan, M. U., and Kara, T. (2019, October). An adaptive neural fuzzy sliding mode control scheme for rotational maneuvering and vibration suppression of a flexible spacecraft. In 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT) (pp. 1-6). IEEE.
Khan, M. U. (2020). Robust adaptive type-2 neural fuzzy sliding mode control of a class of nonlinear systems. (Ph. D. Thesis) Gaziantep University the Institute of Natural and Applied Sciences, Gaziantep, Türkiye.
OpenAI. (2021). ChatGPT (Version 3.5) [Software]. https://openai.com/
Yilmaz, M. M., Serenbay, S. K., and Ibikli, E. (2011). On singular integrals depending on three parameters. Applied Mathematics and Computation, 218(3), 1132-1135.