Karıştırmalı Bilyalı Değirmende K-Feldspatın Öğütülebilirliğini Etkileyen Faktörlerin Tam Faktöriyel Tasarımla Analizi

Year 2022, , 152 - 158, 18.08.2022

Kemal Bilir , Prof. Dr. Halil İpek

https://doi.org/10.31796/ogummf.1009481

Abstract

Bu çalışmanın amacı, karıştırmalı bir bilyalı değirmende K-feldspatın dar tane boyutu aralığında yaş ve kuru öğütülebilirliğini araştırmaktır. Öğütme işleminin değerlendirilmesinde, seçilen parametrelerin bağımlı değişken üzerindeki etkilerini gözlemlemek için tam faktöriyel tasarım kullanılmıştır. Dar tane boyutu aralığında öğütmede bilye çapı, karıştırma hızı, öğütme süresi ve ara doldurma oranı gibi parametre etkileri incelenmiştir. Deneysel sonuçlar, K-feldspatın, dar tane boyutu aralığında (1-10 mikron) karıştırmalı bir bilyalı değirmen ile verimli bir şekilde öğütülebileceğini göstermiştir.

Keywords

K-feldspat, Karıştırmalı bilyalı değirmen, Dar tane boyutu, Tam faktöriyel tasarım

ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN

Abstract

This study's aim is to investigate the wet and dry grindability of K-feldspar in a narrow grain size range in a stirred ball mill. In the evaluation of the grinding process, a full factorial design was used to observe the effects of the selected parameters on the dependent variable. On a narrow grain size range grinding, the parameter effects such as ball diameter, stirring speed, grinding time, and interstitial filling ratio were investigated. Experimental results showed that K-feldspar can be efficiently milled with a stirred ball mill in a narrow grain size range (1-10 microns).

Keywords

K-feldspar, Stirred ball mill, Narrow grain size, Full factorial design

References

• Austin, L. G., Klimpel, R. R., Luckie, P. T. 1984. Process engineering of size reduction: Ball milling: Society of Mining Engineers of the AIME.
• Becker, J. E. 1987. Attrition mill fine grinding of advanced ceramic powders. INTERCERAM Interceram, 36(6), 55. Bernhardt, C., Reinsch, E., Husemann, K. 1999. The influence of suspension properties on ultra-fine grinding in stirred ball mills. Powder technology, 105(1–3), 357-361. Bilir, K., Ipek, H. (2011). Micro-fine grinding of potassium feldspar using stirred ball mill. Paper presented at the Proceedings of XIV Balkan Mineral Processing Congress, Tuzla-Bosnia and Herzegovina.
• Burleson, M. 2003. The ceramic glaze handbook: Materials, techniques, formulas: Lark Books.
• Celik, M. S. 1988. Acceleration of breakage rates of anthracite during grinding in a ball mill. Powder technology, 54(4), 227-233. https://doi.org/10.1016/0032-5910(88)80052-4
• Choi, H., Lee, W., Lee, J., Chung, H., Choi, W. S. 2007. Ultra-fine grinding of inorganic powders by stirred ball mill: Effect of process parameters on the particle size distribution. Metals and Materials Int., 13(4), 353-358.
• Dehghan, R., Noaparast, M., Kolahdoozan, M., Mousavi, S. M. 2008. Statistical evaluation and optimization of factors affecting the leaching performance of a sphalerite concentrate. Int. Journal of Min. Pro., 89(1-4),9-16.
• Dowdle, H. J. (1994). Gringding glazes: A comparison of milling methods. Paper presented at the CERAMIC INDUSTRY.
• Goodson, R., Larson, F., Sheehan, L. 1985. Energy input monitoring during attritor milling. Int. J. Refract. Hard Met., 4(2), 70-76.
• Just, A., Yang, M. (1997). Attrition dry milling in continuous and batch modes. Paper presented at the The Powder and Bulk Solids Conference/Exhibition, Chicago, IL.
• Ipek, H., Ucbas, Y., Hosten, C. 2005. Ternary-mixture grinding of ceramic raw materials. Minerals Engineering, 18(1), 45-49. https://doi.org/10.1016/j.mineng.2004.05.006
• Ma, Z., Hu, S., Zhang, S., Pan, X. 1998. Breakage behavior of quartz in a laboratory stirred ball mill. Powder technology, 100(1), 69-73. Mansouri, M., Khonsari, M. M., Holgerson, M. H., Aung, W. 2002. Application of analysis of variance to wet clutch engagement. Pro. of the Institution of Mechanical Eng. Part J-Journal of Eng. Tribology, 216(J3), 117-125.
• Martı́nez-L, A., Ortiz, J. 2003. Study of celestite flotation efficiency using sodium dodecyl sulfonate collector: Factorial experiment and statistical analysis of data. International Journal of Mineral Processing, 70(1-4), 83-97.
• Montgomery, D., C. 2009. Introduction to statistical quality control. In (Sixth Edition ed.): John Wiley & Sons, Inc.
• Padden, S., Reed, J. 1993. Grinding kinetics and media wear during attrition milling. American Ceramic Society Bulletin, 72(3), 101-112.
• Reed, J. S. 1995. Principles of ceramics processing. In (pp. 313-337): Wiley.
• Szegvari, A. 1994. The fine grinding of ceramics with attritors. Interceram, 43(2), 97-98.
• Szegvari, A., Yang, M. 1989. Fine grinding of high-value-added industrial minerals by attrition milling. Les Mineraux Industriels Materiaux des Annees, 90.
• Szegvari, A., Yang, M. (1995). Versatility of attrition milling (wet or dry process; batch or continuous mode). Paper presented at the Seminar on Powder Production by Fine Grinding Tamhane, A. C. 2009. Two-level factorial experiments. In Statistical analysis of designed experiments (pp. 256-299): John Wiley & Sons, Inc.