Research Article

Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading

Volume: 26 Number: 6 November 13, 2020
  • Alper Bayrakdar
EN

Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading

Abstract

In this study, loading of optimum leather fleshings was investigated with four identical batch reactors with different fleshings and treatment sludge ratios (0:1, 0.25:1, 0.35:1, 0.50:1) to contribute to the state of art of the biogas production from tannery solid wastes. Results showed that lipids-containing leather fleshings boosted the methane production potential. However, H2S inhibition and volatile fatty acids accumulation were the main concern in the anaerobic digestion of these wastes. The modified Gompertz model was applied to the batch tests data to determine the kinetic constants of anaerobic digestion of tannery solid wastes. It was calculated with the model outputs that the ultimate methane production potential and maximum methane production rate in reactors having mixing ratio of 0.35:1 and 0.5:1 (dry basis) were highly similar. 0.35 was found to be an optimum leather fleshing and treatment sludge ratio with a 54% more methane production potential than that of control reactor in this study.

Keywords

References

  1. [1] Thanikaivelan P, Rao JR, Nair BU, Ramasami T. “Recent trends in leather making: Processes, problems, and pathways”. Critical Reviews in Environmental Science and Technology, 35(1), 37-79, 2005.
  2. [2] Çalışma ve Şehircilik Bakanlığı. “Sektörel Atık Klavuzları: Deri Sektörü”. Ankara, Türkiye, 2016.
  3. [3] Schramm W. “New findings on the generation of waste and emissions, and a modified cleaner production assessment approach - Illustrated by leather production”. Journal of Cleaner Production, 5(4), 291-300, 1997.
  4. [4] Sundar VJ, Gnanamani A, Muralidharan C, Chandrababu NK, Mandal AB. “Recovery and utilization of proteinous wastes of leather making: A review”. Reviews in Environmental Science and Biotechnology, 10(2), 151-163, 2011.
  5. [5] Agustini CB, Spier F, da Costa M, Gutterres M. “Biogas production for anaerobic co-digestion of tannery solid wastes under presence and absence of the tanning agent”. Resources, Conservation and Recycling, 130, 51-59, 2018.
  6. [6] Sri Bala Kameswari K, Kalyanaraman C, Porselvam S, Thanasekaran K. “Optimization of inoculum to substrate ratio for bio-energy generation in co-digestion of tannery solid wastes”. Clean Technologies and Environmental Policy, 14(2), 241-250, 2012.
  7. [7] Dhayalan K, Fathima NN, Gnanamani A, Rao JR, Nair BU, Ramasami T. “Biodegradability of leathers through anaerobic pathway”. Waste Management, 27(6), 760-767, 2007.
  8. [8] Šánek L, Pecha J, Kolomazník K, Bařinová M. “Biodiesel production from tannery fleshings: Feedstock pretreatment and process modeling”. Fuel, 148, 16-24, 2015.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

Alper Bayrakdar This is me
Türkiye

Publication Date

November 13, 2020

Submission Date

September 20, 2019

Acceptance Date

-

Published in Issue

Year 2020 Volume: 26 Number: 6

APA
Bayrakdar, A. (2020). Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 26(6), 1133-1137. https://izlik.org/JA28BD79RA
AMA
1.Bayrakdar A. Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. 2020;26(6):1133-1137. https://izlik.org/JA28BD79RA
Chicago
Bayrakdar, Alper. 2020. “Anaerobic Co-Digestion of Tannery Solid Waste: Optimum Leather Fleshing Waste Loading”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 26 (6): 1133-37. https://izlik.org/JA28BD79RA.
EndNote
Bayrakdar A (November 1, 2020) Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 26 6 1133–1137.
IEEE
[1]A. Bayrakdar, “Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading”, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol. 26, no. 6, pp. 1133–1137, Nov. 2020, [Online]. Available: https://izlik.org/JA28BD79RA
ISNAD
Bayrakdar, Alper. “Anaerobic Co-Digestion of Tannery Solid Waste: Optimum Leather Fleshing Waste Loading”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 26/6 (November 1, 2020): 1133-1137. https://izlik.org/JA28BD79RA.
JAMA
1.Bayrakdar A. Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. 2020;26:1133–1137.
MLA
Bayrakdar, Alper. “Anaerobic Co-Digestion of Tannery Solid Waste: Optimum Leather Fleshing Waste Loading”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol. 26, no. 6, Nov. 2020, pp. 1133-7, https://izlik.org/JA28BD79RA.
Vancouver
1.Alper Bayrakdar. Anaerobic co-digestion of tannery solid waste: Optimum leather fleshing waste loading. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi [Internet]. 2020 Nov. 1;26(6):1133-7. Available from: https://izlik.org/JA28BD79RA