In this study, a functional graded material (FGM) consisted of NiTi NiAl and Ni3Al were manufactured by self-propagating high-temperature synthesis (SHS) technique. These three different compound powders were mixed in a rotating container after accurately weighed and cold compacted under 200 MPa pressure. These pressed samples were produced for 200, 300 and 400 ° C preheating temperature by igniting with high voltage under argon gas atmosphere. The microstructures of these functional graded materials were examined by microscopy, Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD). Consequently, functional graded material successful generated by SHS in every three preheating temperature and the metallic desired compounds were obtained but, it was seen that apart from the main phases in the intersection there are other phases with more melting and gaps.
Bu çalışmada, Ni3Al/NiAl/NiTi bileşiklerinden oluşan fonksiyonel derecelenmiş malzeme(FDM) kendi kendine ilerleyen yüksek sıcaklık sentezlemesi (KKIYSS) tekniği ile üretilmiştir. Bu üç farklı bileşiği oluşturacak tozlar hassas bir şekilde tartıldıktan sonra mekanik olarak karıştırılmış ve 200 MPa basınçla preslenmiştir. Preslenen numuneler, 200, 300 ve 400 °C ön ısıtma sıcaklıklarında yüksek voltajlı tutuşturma yöntemi (YVTY) ile argon gazı atmosferinde ateşlenerek üretimi gerçekleştirilmiştir. Üretilen bu fonksiyonel derecelenmiş malzemelerin mikroyapıları optik mikroskop, Taramalı Elektron Mikroskobu (SEM) ve X-Işınları Kırınım Cihazı (XRD) ile incelenmiş. Sonuç olarak, KKIYSS yöntemi ile her üç ön ısıtma sıcaklığında da fonksiyonel derecelenmiş malzeme başarıyla üretilmiş ve istenen metaller arası bileşikler elde edilmiş ancak arakesitlerde daha fazla ergime ve boşluk ile birlikte ana fazlar dışında fazların da oluştuğu görülmüştür.
Primary Language | English |
---|---|
Journal Section | Research Article |
Authors | |
Publication Date | January 3, 2016 |
Published in Issue | Year 2015 Volume: 21 Issue: 8 |