Determination of Optimum Cement Type of Concrete Exposed to Various Chemical Hazardous Environments

Year 2012, Volume: 16 Issue: 2, 76 - 82, 01.08.2012

Mücteba Uysal Bedri Caner Alpay Kemalettin Yılmaz

Abstract

-

Keywords

Cement, Compressive Strength, Hazardous Environment, Concrete Type.

Farklı Kompozisyonlardaki Zararlı Ortamlara Maruz Kalan Betonlar İçin Uygun Çimento Tipinin Belirlenmesi

Abstract

It is emerged to use the materials optimum and efficiently due to shortage of material arising from increasing demands and developed and improved technology. Because of this, it is necessity to understand throughly and analyze the internal structure and mechanical behaviour of cement which one of the most important component of concrete. Water, carbon dioxide, oxygen, sulfate, acid and chloride infiltrate into concrete and caused various types of chemical reactions. Therefore, the concrete has exposed to some chemical and physical factors caused durability problems within the concrete. In this study, CEM I 42.5 R, CEM II/A-P 42.5 R, CEM IV/A-P 32.5 R and SDC 42.5 R types of cements were used and two types of concrete (C20/25 and C30/37) were produced and the concretes were exposed to two various hazardous chemical environments. Compressive strength test was performed on the specimens at 28 d and 180 d. However, it was aimed to determine optimum cement type of concrete exposed to various chemical hazardous environments at Ambarli Advanced Biological Wastewater Treatment Plant.

Keywords

Çimento, Basınç Dayanımı, Zararlı Ortam, Beton Sınıfı.

References

• Söylev, T.A., Özturan T., Çelik ve Polipropilen Liflerin Betonun Mekanik ve Geçirimlilik Özelliklerine Etkisi, 8. Ulusal Beton Kongresi, s.425-433, İzmir (2011).
• Topçu, İ.B., Yapı Malzemesi ve Beton, Şahvar Offset, Eskişehir (2006).
• Kırca, Ö., Yapılarda Beyaz Beton Uygulamaları, Konut Kurultayı Bildiriler Kitabı, İstanbul (2002).
• Tuyan, M., Yazıcı, H., Yüksek Performanslı Harçlarda Lif-Matris Aderansının İncelenmesi, 8. Ulusal Beton Kongresi, s.299-308, İzmir (2011).
• Bilim, C., Atis, C.D., Tanyildizi, H., Karahan, O., Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network, Advances in Engineering Software, Vol.40(5), pp.334-340 (2009).
• Siddique, R., Aggarwal, Y., Aggarwal, P., Kadri, E.H., Bennacer, R., Strength, durability, and microstructural properties of concrete made with usedfoundry sand (UFS), Construction and Building Materials, Vol.25, pp.1916-1925 (2011).
• Siddique, R., Performance characteristics of highvolume Class F fly ash concrete Cement and Concrete Research, Vol.34, pp. 487-493 (2004).
• Neville A.M., Properties of Concrete, Longman Scientific & Technical, England (1981).
• Kovler, K., Roussel, N., Properties of fresh and hardened concrete, Cement and Concrete Research, Vol. 41, pp. 775-792 (2011).
• Yerramala, A., Babu, K.G., Transport properties of high volume fly ash roller compacted concrete, Cement & Concrete Composites, Vol.33, pp.10571062 (2011).
• Kabay, N., Akoz, F., Effect of prewetting methods on some fresh and hardened properties of concrete with pumice aggregate, Cement & Concrete Composites, Vol.34,pp. 503–507 (2012).
• Erdoğan, T.Y., Beton, ODTÜ Geliştirme Vakfı Yay. ve İletişim A.Ş., Ankara (2003).
• Baradan, B., Yazıcı, H., Ün, H., Beton ve Betonarme Yapılarda Kalıcılık, Türkiye Hazır Beton Birliği, İstanbul (2010).
• Mehta, P.K., Monteiro, J.M.P., Concrete (microstructure, properties and materials), Indian Concrete Institute, Indian Edition (2006).
• TS 3530, Beton Agregalarının Tane Büyüklüğü Dağılımının Tayini, Türk Standartları Enstitüsü, Ankara (1980).