DESIGN and EVALUATION of a PRECISION ADJUSTABLE MECHANISM for BIAS BINDING APPARATUS in TEXTILE MACHINES
Abstract
For bias binding, the edge cleaning process is performed by attaching bias binding apparatus of different widths. When the bias binding apparatus is mounted on the machine, the distance adjustment to the needle foot must be precisely adjusted. In this study, a new mechanism has been designed and it is possible to move the bias to and from the needle foot by moving the bias back and forth to the needle foot in 0.5 mm increments thanks to the adjustable special sliding bolt without using a lever or screwdriver as in the existing bias apparatus. It is believed that the designed mechanism is more efficient in variable parameters such as higher precision, ergonomics, ease of use and robustness compared to similar ones. It is therefore predicted that the use of this design, which can work with greater precision, will provide a more efficient working environment in terms of workload and time.
References
- Carvalho, H., Rocha, A., Monteiro, J., Silva, L.F., (2004), Planning, control and monitoring tools for industrial garment assembly processes, Conference: Industrial Technology, 2003 IEEE International Conference on Volume: 1, 381-386.
- Alsamarah, W., Younes, B., Yousef, M., (2021), Reducing waste in garment factories by intelligent planning of optimal cutting orders, The Journal of The Textile Institute, 113(1), 1-9, https://doi.org/ 10.1080/ 00405000.2021.1956711.
- Arsoy, R., Aslan, S., (2023), Model asorti raporu hesaplanmasına yönelik yazılım geliştirilmesi, Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, 10(20), 156-167, https://doi.org/10.54365/ adyumbd.1243415
- Martelli, J.D., (2004), Sewıng machıne pressure foot and bıas bınder plate assembly, Patent No.: US 6.745.711 B1, Date of Patent: June 8, 2004.
- Carvalho, H., Silva, L.F., Rocha, A., Monteiro, J. (2012), Automatic presser‐foot force control for industrial sewing machines, International Journal of Clothing Science and Technology, 24(1), 36-55, https://doi.org/10.1108/09556221211194336
- Mohammad Faizur, R., Mohammad Ashraful, A., Kazi Rezwan, H., Lal Mohan, B., Mahadi Hasan, S., Prosenjit, S., Mohammad Rafiqur, R., (2023), Impact of Modified Feed Mechanism on Seam Quality of Garments. Annals of the University of Oradea. Fascicle of Textiles, Leatherwork, 24(1), 89–96.
- Ebrahimi, S., Hajizadeh, I., Payvandy, P., (2014), Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Performance Improvement, International Journal of Advanced Design and Manufacturing Technology, 7, 9-18.
- Moniz, A.R., (2000), Method and apparatus for automatıcally fınıshıng the end of a bındıng strıp, Patent Number: 6.044.783, Date of Patent: April 4, 2000.
- Kozhevnikov, S.N., Esipenko, Ya.I., Raskin, Ya.M., (1976), Mechanisms, Mechanical Engineering, Moscow.
- Artobolevsky, I. I., (1970), Mechanisms in modern technology, Volume 1, Science, Moscow.
- Miller, S.E., Wilmette, I., (1969), Apparatus for feedıng and cuttıng strıp materıal, Patent Number: 602,678, Date of Patent: April 29, 1969.
- Siu Hong, Ng., (1998), Sewıng machıne hem folder attachment, Patent Number: 5.715.765, Date of Patent: February 10, 1998.
- Abdulla, G., Arsoy, R., (2020), Makine Teorisi. Nobel Yayın evi, Ankara.
TEKSTİL MAKİNELERİNDE BİYE APARATI İÇİN HASSAS AYARLANABİLİR BİR MEKANİZMANIN TASARIMI ve DEĞERLENDİRİLMESİ
Abstract
Biye dikimi için değişik genişliklerde biye aparatı takarak biye ile kenar temizleme işlemi yapılır. Biye aparatının makineye monte edilme esnasında iğne ayağına olan mesafe ayarının hassas bir şekilde ayarlanması gerekmektedir. Bu çalışmada, yeni bir mekanizma tasarlanarak mevcut biye aparatlarında olduğu gibi kol veya tornavida kullanmadan ayarlanabilir özel kaydırma civatası sayesinde 0,5 mm adımlarla biyenin iğne ayağına ileri ve geri hareket ettirerek yaklaştırabilmekte ve uzaklaştırabilmesi sağlanmıştır. Tasarlanan mekanizmanın benzerlerine göre daha yüksek hassasiyet, ergonomi, kullanım basitliği ve sağlamlığı gibi değişken parametrelerde daha fazla verimli olduğudüşünülmektedir. Böylece daha fazla hassasiyetle çalışabilinecek bu tasarımın kullanılması ile iş yükü ve zamanı açısından daha verimli bir çalışma ortamı sağlayacağı öngörülmektedir.
References
- Carvalho, H., Rocha, A., Monteiro, J., Silva, L.F., (2004), Planning, control and monitoring tools for industrial garment assembly processes, Conference: Industrial Technology, 2003 IEEE International Conference on Volume: 1, 381-386.
- Alsamarah, W., Younes, B., Yousef, M., (2021), Reducing waste in garment factories by intelligent planning of optimal cutting orders, The Journal of The Textile Institute, 113(1), 1-9, https://doi.org/ 10.1080/ 00405000.2021.1956711.
- Arsoy, R., Aslan, S., (2023), Model asorti raporu hesaplanmasına yönelik yazılım geliştirilmesi, Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, 10(20), 156-167, https://doi.org/10.54365/ adyumbd.1243415
- Martelli, J.D., (2004), Sewıng machıne pressure foot and bıas bınder plate assembly, Patent No.: US 6.745.711 B1, Date of Patent: June 8, 2004.
- Carvalho, H., Silva, L.F., Rocha, A., Monteiro, J. (2012), Automatic presser‐foot force control for industrial sewing machines, International Journal of Clothing Science and Technology, 24(1), 36-55, https://doi.org/10.1108/09556221211194336
- Mohammad Faizur, R., Mohammad Ashraful, A., Kazi Rezwan, H., Lal Mohan, B., Mahadi Hasan, S., Prosenjit, S., Mohammad Rafiqur, R., (2023), Impact of Modified Feed Mechanism on Seam Quality of Garments. Annals of the University of Oradea. Fascicle of Textiles, Leatherwork, 24(1), 89–96.
- Ebrahimi, S., Hajizadeh, I., Payvandy, P., (2014), Multiobjective Constrained Optimization of a Newly Developed Needle Driving Mechanism in the Sewing Machine for Performance Improvement, International Journal of Advanced Design and Manufacturing Technology, 7, 9-18.
- Moniz, A.R., (2000), Method and apparatus for automatıcally fınıshıng the end of a bındıng strıp, Patent Number: 6.044.783, Date of Patent: April 4, 2000.
- Kozhevnikov, S.N., Esipenko, Ya.I., Raskin, Ya.M., (1976), Mechanisms, Mechanical Engineering, Moscow.
- Artobolevsky, I. I., (1970), Mechanisms in modern technology, Volume 1, Science, Moscow.
- Miller, S.E., Wilmette, I., (1969), Apparatus for feedıng and cuttıng strıp materıal, Patent Number: 602,678, Date of Patent: April 29, 1969.
- Siu Hong, Ng., (1998), Sewıng machıne hem folder attachment, Patent Number: 5.715.765, Date of Patent: February 10, 1998.
- Abdulla, G., Arsoy, R., (2020), Makine Teorisi. Nobel Yayın evi, Ankara.
Details
| Primary Language | Turkish |
|---|---|
| Subjects | Materials Engineering (Other) |
| Journal Section | Articles |
| Authors | |
| Publication Date | September 30, 2024 |
| Submission Date | May 20, 2024 |
| Acceptance Date | August 23, 2024 |
| Published in Issue | Year 2024 Volume: 31 Issue: 135 |