In this study, polishing properties of limestone
were investigated to determine the effects of different abrasive head rotation.
To achieve this goal, two different limestone samples commercially available in
the market were studied. Polishing experiments were applied under constant band
speed, abrasive head pressure and water amount for limestone samples of 30x30x2
cm dimension by using a laboratory-scale polishing machine. In order to define
the change in the samples polished at 400 rev/min, 600 rev/min and 800 rev/min abrasion
head rotation; Ra, Rq and Rz values of roughness parameter and brightness
measurements were carried out on pre-determined surfaces of the marble samples.
Polishing experiments showed that, with a few exceptions, brightness increases
with decreasing roughness. And also; the effect of the speed of rotation on the
polishing process and the roughness values of Rq and Rz which the surface
topography exhibited change were observed. As a result, in different abrasive
head rotation, significantly affected brightness and roughness properties of
the tested limestone varieties.
Bu
çalışma, kireçtaşların parlatılabilirlik özellikleri üzerine abrasiv kafa
devrinin etkisinin incelenmesi amacıyla yapılmıştır. Bu çalışmada ticari olarak
üretimi yapılan iki adet kireçtaşı örneği kullanılmıştır. Parlatma işlemi,
30x30x2 cm boyutlarındaki kireçtaşı örneklerine aynı abrasiv serisi, sabit bant
hızı, sabit kafa basıncı ve sabit su miktarında, 400 D/D, 600 D/D ve 800 D/D
abrasiv kafa devrinde laboratuvar ölçekli cila makinasında yapılmıştır. Farklı
devir hızlarında parlatılan örneklerdeki değişimin tanımlanması amacıyla;
pürüzlülük parametrelerinden Ra, Rq ve Rz değerleri ve parlaklık ölçümleri
yapılmıştır. Parlatma deneyleri sonucunda, artan abrasiv devir hızına bağlı
olarak pürüzlülüğün azaldığı ve parlaklığın arttığı tespit edilmiştir. Bunun
yanısıra; parlatma işleminde devir hızının etkisi ile yüzey topografyasının
değişim sergilediği Rq ve Rz pürüzlülük değerlerinin artmasıyla gözlenmiştir.
Sonuç olarak, kireçtaşlarının farklı abrasiv kafa devrinde parlatılması ile
pürüzlülük ve parlaklık değerlerinin değişim gösterdiği ve abrasiv devrinin
pürüzlülük ve parlaklık özelliklerini önemli ölçüde etkilediği sonucuna
varılmıştır.
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Research Articles |
Authors | |
Publication Date | August 31, 2018 |
Submission Date | January 12, 2018 |
Acceptance Date | May 31, 2018 |
Published in Issue | Year 2018 Volume: 23 Issue: 2 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.