Year 2018, Volume 2, Issue 2, Pages 68 - 75 2018-07-27

A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING
3D BIYO-YAZICILARDA KULLANILAN HİDROJELLER ÜZERİNE BİR İNCELEME

Mehmet TOPUZ [1] , Burak DİKİCİ [2] , Mehmet GAVGALI [3] , Hakan YILMAZER [4]

150 333

The bio-printing process describes as a computer-aided transfer process for printing of biological structures such as cells and biomaterials to fabricate medical constructions for different medical fields (tissue engineering, regenerative medicine, or other biological studies). Especially, three-dimension (3D) bio-printing technology is used to print living organs like livers, kidneys, lungs, and any other organs in the body. Hydrogels have been widely used in 3D bio-printing to load cell for tissue engineering due to their high biocompatibility. In addition, hydrogels simulate the soft tissues which present in the body, swollen in water at high levels and have similar mechanical properties to those of natural soft tissues, many researchers have been interested in hydrogels and their reputations are increasing day by day. They are generally divided into two groups as (i) natural hydrogels and (ii) synthetic hydrogels. Key documents in the literature about both natural and synthetic hydrogels have been reviewed in this study. Also, 3D bio-printing process of the hydrogels has been discussed as detailly.

Biyo-yazıcı işlemi, farklı tıbbi alanlarda (doku mühendisliği, rejeneratif tıp veya diğer biyolojik çalışmalar) tıbbi yapıları imal etmek için hücreler ve biyomateryaller gibi biyolojik yapıların üretilmesi için bilgisayar destekli bir transfer işlemi olarak tanımlanmaktadır. Üç boyutlu (3D) bio-yazıcı teknolojisi, özellikle karaciğer, böbrekler, akciğerler ile vücuttaki diğer canlı organlar ile diğer organların yazdırılmasında kullanılır. Hidrojeller, yüksek biyo-uyumlulukları nedeniyle doku mühendisliği için hücre yüklemek için 3D biyo-yazıcıda yaygın olarak kullanılmaktadır. Buna ek olarak, hidrojeller vücutta bulunan yumuşak dokuları simüle etmesi, suda yüksek oranda şişebilme kaabiliyeti ve doğal yumuşak dokularınki ile benzer mekanik özelliklere sahip olmasından dolayı birçok araştırmacı hidrojel ile ilgilenmiştir ve onlara olan ilgi her geçen gün artmaktadır. Genellikle (i) doğal hidrojeller ve (ii) sentetik hidrojel olarak iki gruba ayrılırlar. Bu çalışmada hem doğal hem de sentetik hidrojeller hakkında literatürdeki önemli belgeler derlenmiş olup ek olarak, hidrojellerin 3D biyo-yazıcı işlemi detaylı bir şekilde tartışılmıştır.

  • Klebe RJ. Cytoscribing: A method for micropositioning cells and the construction of two- and three-dimensional synthetic tissues. Experimental Cell Research. 1988;179(2):362–373.
  • Ozbolat IT. 3D Bioprinting: Fundamentals, Principles and Applications, 2016. s.356
  • Hockaday LA, Kang KH, Colangelo NW, Cheung PYC, Duan B, Malone E, Wu J, Girardi LN, Bonassar LJ, Lipson H, Chu CC, Butcher JT, Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication. 2012;4(3):005-035.
  • Inzana J, Olvera D, Fuller SM, Kelly JP, Graeve O, Schwarz EM, Kates SL, Awad H, 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. Biomaterials. 2014;35(13): 4026-4034.
  • Yanagawa F, Sugiura S, Kanamori T, Hydrogel microfabrication technology toward three dimensional tissue engineering. Regenerative Therapy. 2016;3:45–57.
  • Chimene D, Lennox KK, Kaunas RR, Gaharwar AR, Advanced Bioinks for 3D Printing: A Materials Science Perspective. Annals of Biomedical Engineering. 2016;44(6):2090–2102.
  • Jessop ZM, Al-Sabah A, Gardiner MD, Combellack E, Hawkins K, Whitaker IS, 3D bioprinting for reconstructive surgery: Principles, applications and challenges. Journal of Plastic, Reconstructive & Aesthetic Surgery. 2017;70(9):1155–1170.
  • Cornelissen DJ, Faulkner-Jones A, Shu W, Current developments in 3D bioprinting for tissue engineering. Current Opinion in Biomedical Engineering. 2017;2:76–82.
  • Yahia LH, History and Applications of Hydrogels. J. Biomed. Sci. 2015;4(2):1–23.
  • He Y, Yang F, Zhao H, Gao Q, Xia B, Fu J, Research on the printability of hydrogels in 3D bioprinting. Scientific Reports. 2016;6:1–13.
  • Jang J, Seol YJ, Kim HJ, Kundu J, Kim SW, Cho DW, Effects of alginate hydrogel cross-linking density on mechanical and biological behaviors for tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials. 2014;37:69-77.
  • Zhao W, Jin X, Cong Y, Liu Y, Fu J, Degradable natural polymer hydrogels for articular cartilage tissue engineering. Journal of Chemical Technology and Biotechnology. 2013;88(3):327–339.
  • Holland NB, Qiu Y, Ruegsegger M, Marchant RE, Biomimetic engineering of non-adhesive glycocalyx-like surfaces using oligosaccharide surfactant polymers. Nature. 1998;392(6678):799-801.
  • Alsberg E, Anderson KW, Albeiruti A, Rowley JA, Mooney DJ, Engineering growing tissues. National Academy of Sciences. 2002;99(19):12025-12030.
  • Tomei AA, Manzoli V, Fraker CV, Giraldo J, Velluto D, Najjar M, Pileggi A, Molano RD, Ricordi C, Stabler CL, Hubbell JA, Device design and materials optimization of conformal coating for islets of Langerhans. National Academy of Sciences. 2014;111(29):10514-10519.
  • Draget KI, Skjåk-Bræk G, Smidsrød O, Alginate based new materials. International Journal of Biological Macromolecules. 1997;21(1-2):47-55.
  • Blaeser A, Duarte Campos DF, Weber M, Neuss S, Theek B, Fischer H, Jahnen-Dechent W, Biofabrication Under Fluorocarbon: A Novel Freeform Fabrication Technique to Generate High Aspect Ratio Tissue-Engineered Constructs. BioResources. 2013;2(5):374-384.
  • Gudapati H, Yan J, Huang Y, Chrisey DB, Alginate gelation-induced cell death during laser-assisted cell printing. Biofabrication. 2014;6(3):022-035.
  • Freier T, Koh HS, Kazazian K, Shoichet MS, Controlling cell adhesion and degradation of chitosan films by N-acetylation. Biomaterials. 2005;26(29):5872-5878.
  • Kumar MNVR, Muzzarelli RAA, Muzzarelli C, Sashiwa H, Domb SJ, Chitosan chemistry and pharmaceutical perspectives. Chemical Reviews (ACS Publications). 2004;104(12):6017-6084.
  • Croisier F, Jerome C, Chitosan-based biomaterials for tissue engineering. European Polymer Journal. 2013;49(4):780-792.
  • Geng L, Feng W, Hutmacher DW, San Wong Y, Tong Loh H, Fuh JYH, Direct writing of chitosan scaffolds using a robotic system. Rapid Prototyping Journal. 2005;11(2):90-97.
  • Ozbolat IT, Hospodiuk M, Current advances and future perspectives in extrusion-based bioprinting. Biomaterials. 2016;76:321–343.
  • Huang B, Liu M, Zhou C, Chitosan composite hydrogels reinforced with natural clay nanotubes. Carbohydrate Polymers. 2017;175(August):689–698.
  • Cui X, Boland T, Human microvasculature fabrication using thermal inkjet printing technology. Biomaterials. 2009;30(31):6221-6227.
  • Skardal A, Mack D, Kapetanovic E, Atala A, Jackson JD, Yoo J, Soker S, Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds. Journal of Stem Cells Translational Medicine. 2012;1(11):792-802.
  • Yanez M, Rincon J, Dones A, De Maria C, Gonzales R, Boland T, In Vivo Assessment of Printed Microvasculature in a Bilayer Skin Graft to Treat Full-Thickness Wounds. Tissue Engineering Part A. 2015;21(1-2):224-233.
  • Ahmed TAE, Dare EV, Hincke E, Fibrin: a versatile scaffold for tissue engineering applications. Tissue Engineering Part B: Reviews. 2008;14(2):199-215.
  • Eyrich D, Brandl F, Appel B, Wiese H, Maier G, Wenzel W, Staudenmaier R, Goepferich A, Blunk T, Long-term stable fibrin gels for cartilage engineering. Biomaterials. 2007;28(1):55-65.
  • Ozbolat IT, Hospodiuk M, Current advances and future perspectives in extrusion-based bioprinting. Biomaterials. 2016;76:321–343.
  • Gruene M, Pflaum M, Deiwick A, Koch L, Schlie S, Unger C, Wilhelmi M, Haverich A, Chichkov BN, Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells. Biofabrication. 2011;3(1):005-015.
  • Ratner R, Hoffman R, Synthetic Hydrogels for Biomedical Applications. in: ACS Symposium Series American Chemical Society, Washington, 1976, 1–36.
  • Gibas I, Janik H, Review : Synthetic Polymer Hydrogels for Biomedical. Chemistry & Chemical Technology. 2010;4:297–304.
  • Cretu A, Gattin R, Brachais L, Barbier-Baudry D, Synthesis and degradation of poly (2-hydroxyethyl methacrylate)-graft-poly (ε-caprolactone) copolymers. Polymer Degradation and Stability. 2004;83(3):399-404.
  • Wu M, Bao B, Yoshii F, Makuuchi K, Irradiation of crosslinked, poly(vinyl alcohol) blended hydrogel for wound dressing. Journal of Radioanalytical and Nuclear Chemistry. 2001;250(2):391–395.
  • Benoit DSW, Durney AR, Anseth KS, Manipulations in Hydrogel Degradation Behavior Enhance Osteoblast Function and Mineralized Tissue Formation. Journal of Tissue Engineering. 2006;12(6):1663-1673.
Primary Language en
Subjects Engineering
Journal Section Articles
Authors

Orcid: 0000-0003-3692-796X
Author: Mehmet TOPUZ (Primary Author)
Institution: YÜZÜNCÜ YIL ÜNİVERSİTESİ
Country: Turkey


Orcid: 0000-0002-7249-923X
Author: Burak DİKİCİ
Institution: ATATÜRK ÜNİVERSİTESİ
Country: Turkey


Author: Mehmet GAVGALI
Institution: ATATÜRK ÜNİVERSİTESİ
Country: Turkey


Author: Hakan YILMAZER
Institution: YILDIZ TEKNİK ÜNİVERSİTESİ
Country: Turkey


Bibtex @review { ij3dptdi419806, journal = {International Journal of 3D Printing Technologies and Digital Industry}, issn = {2602-3350}, address = {KERİM ÇETİNKAYA}, year = {2018}, volume = {2}, pages = {68 - 75}, doi = {}, title = {A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING}, key = {cite}, author = {TOPUZ, Mehmet and DİKİCİ, Burak and GAVGALI, Mehmet and YILMAZER, Hakan} }
APA TOPUZ, M , DİKİCİ, B , GAVGALI, M , YILMAZER, H . (2018). A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING. International Journal of 3D Printing Technologies and Digital Industry, 2 (2), 68-75. Retrieved from http://dergipark.org.tr/ij3dptdi/issue/38540/419806
MLA TOPUZ, M , DİKİCİ, B , GAVGALI, M , YILMAZER, H . "A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING". International Journal of 3D Printing Technologies and Digital Industry 2 (2018): 68-75 <http://dergipark.org.tr/ij3dptdi/issue/38540/419806>
Chicago TOPUZ, M , DİKİCİ, B , GAVGALI, M , YILMAZER, H . "A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING". International Journal of 3D Printing Technologies and Digital Industry 2 (2018): 68-75
RIS TY - JOUR T1 - A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING AU - Mehmet TOPUZ , Burak DİKİCİ , Mehmet GAVGALI , Hakan YILMAZER Y1 - 2018 PY - 2018 N1 - DO - T2 - International Journal of 3D Printing Technologies and Digital Industry JF - Journal JO - JOR SP - 68 EP - 75 VL - 2 IS - 2 SN - 2602-3350- M3 - UR - Y2 - 2018 ER -
EndNote %0 International Journal of 3D Printing Technologies and Digital Industry A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING %A Mehmet TOPUZ , Burak DİKİCİ , Mehmet GAVGALI , Hakan YILMAZER %T A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING %D 2018 %J International Journal of 3D Printing Technologies and Digital Industry %P 2602-3350- %V 2 %N 2 %R %U
ISNAD TOPUZ, Mehmet , DİKİCİ, Burak , GAVGALI, Mehmet , YILMAZER, Hakan . "A REVIEW ON THE HYDROGELS USED IN 3D BIO-PRINTING". International Journal of 3D Printing Technologies and Digital Industry 2 / 2 (July 2018): 68-75.