Araştırma Makalesi
Yıl 2019,
Cilt: 34 Sayı: 3, 143 - 154, 30.09.2019
Öz
Günümüzde aynı veya farklı türlerdeki malzemelerin birleştirilmesi için kolay uygulanabilme ve ekonomik olmaları nedeniyle yapıştırıcılar oldukça fazla kullanılmaktadır. Gelişen teknoloji ve üretim yöntemleriyle beraber hemen hemen her alan için ihtiyaç duyulan yapıştırıcılar üretilmektedir. Yapıştırıcıların özelliklerinin iyileştirilmesi için çalışmalar yapılmaktadır. Çalışmada, epoksi yapıştırıcıların içerisine karbon nanopartikül eklenerek oluşturulan yapıştırma bağlantılarında nanopartikül oranının pürüzlü yüzeylerdeki yapışma dayanımına etkileri araştırılmıştır. Yapıştırıcılara, yapıştırıcı ağırlığının %0,5 ile %5’i aralığındaki oranlarda nanopartiküller eklenerek deneyler yapılmıştır. Nanopartiküllerin belirli bir orana kadar yapışma dayanımına olumlu etki gösterdiği sonrasında ise bu etkilerinin azaldığı görülmüştür.
Anahtar Kelimeler
Kaynakça
- 1. Aydın, S., 2012. Yapıştırıcı ile Birleştirilmiş Prizmatik Geçmeli Bağlantıların Mekanik Analizleri, Doktora Tezi, Fen Bilimleri Enstitüsü, Fırat Üniversitesi, Elazığ.
- 2. Hsiao, K.T., Alms, J., Advani, S.G., 2003. Use of Epoxy/multiwalled Carbon Nanotubes as Adhesives to Join Graphite Fibre Reinforced Polymer Composites. Nanotechnology 14, 791-793.
- 3. Panta, J., Jagannatham, M., Prathap, H., Ram, G.D.J., Deshpande, A.P., Bakshi, S.R., 2016. Effect of Different Carbon Nano-fillers on Rheological Properties and Lap Shear Strength of Epoxy Adhesive Joints Composites A, 82, 53–64.
- 4. Florian, G., Malte, W., Bodo, F., Schulte, K., 2005. Influence of Different Carbon Nanotubes on the Mechanical Properties of Epoxy Matrix Composites-A Comparative Study. Composites Science and Technology. 65, 2300-2313. 10.1016/j.compscitech.2005.04.021.
- 5. Saeed, M.B., Zhan, M.S., 2007. Adhesive Strength of Nano-size Particles Filled Thermoplastic Polyimides. Part-I: Multi-walled Carbon Nano-tubes (MWNT)-polyimide Composite Films, Int. J. Adhes. Adhes., 27, 306–318.
- 6. Lanlan, Z., Guoping, L., Jian, L., Youwen, W., 2006. The Effect of Nanoparticles on the Adhesion of Epoxy Adhesive, Materials Letters, 60, 3031–3033.
- 7. Gültekin K., Akpinar S., Gürses A., Eroglu Z., Cam S., Akbulut, H., Keskin, Z., Özel, A., 2016. The Effects of Graphene Nanostructure Reinforcement on the Adhesive Method and the Graphene Reinforcement Ratio on the Failure Load in Adhesively Bonded Joints, Composites Part B, 98, 362-369.
- 8. Akpinar, İ.A., Gültekin K., Akpinar, S., Akbulut, H., Özel, A., 2017. Research on Strength of Nanocomposite Adhesively Bonded Composite Joints, Composites Part B, 126, 143-152.
- 9. May, M., Wang, H.M., Akid, R., 2010. Effects of the Addition of Inorganic Nanoparticles on the Adhesive Strength of a Hybridsol-gel Epoxy System, International Journal of Adhesion & Adhesives, 30, 505–512.
- 10. Wernik, J.M., Meguid, S.A., 2014. On the Mechanical Characterization of Carbon Nanotube Reinforced Epoxy Adhesives. Materials & Design, 59(0), 19-32.
- 11. Razavi, S.M.J., Ayatollahi, M.R., Nemati, G.A., Khoramishad, H., 2018. Single Lap Joints Bonded with Structural Adhesives Reinforced with a Mixture of Silica Nanoparticles and Multi Walled Carbon Nanotubes, International Journal of Adhesion and Adhesives, 80, 76–86.
- 12. Douba, A., Genedy, M., Matteo, E.N., Kandil, U.F., Stormont, J., Reda, T.M.M., 2017. The Significance of Nanoparticles on Bond Strength of Polymer Concrete to Steel, International Journal of Adhesion & Adhesives, 74, 77–85.
- 13. Andrew, J., McNamara, Y.J., Zhuomin, M.Z., 2015. Thermal Resistance of Thermal Conductive Adhesive Anchored Carbon Nanotubes Interface Material, Int. J. Thermal Sci., 96, 221-226.
- 14. Suzhu, Y., Tong M.N., Critchlow, G., 2010. Use Ofcarbon Nanotubes Reinforced Epoxy as Adhesives to Join Aluminum Plates. Materials and Design, 31, 126-129.
- 15. C hena H., Jacobs O., Wua W., Rudiger G. Schadel B., 2007. Effect of Dispersion Method on Tribological Properties of Carbon Nanotube Reinforced Epoxy Resin Composites. Polymer Testing 26, 351–360.
- 16. Aydın, S., Fertelli, A., 2018. Nanopartikül ve Yüzey Pürüzlülüğünün Yapışma Mukavemetine Etkilerinin İncelenmesi, Academic Perspective Procedia, 1(1), 1164-1170.
Yıl 2019,
Cilt: 34 Sayı: 3, 143 - 154, 30.09.2019
Öz
Nowadays, adhesives are widely used because they are easy to apply and economical for joining the same or different types of materials. With the developing technology and production methods, adhesives needed for almost every field are produced. Efforts are being made to improve the properties of adhesives. In this study, effects of nanoparticle ratio on adhesion strength on rough surfaces were investigated in bonding joints formed by adding carbon nanoparticle into epoxy adhesives. Experiments were carried out by adding nanoparticles in the range of 0.5% to 5% of the adhesive weight. Nanoparticles showed a positive effect on adhesion strength up to a certain rate, and after that, these effects decreased.
Anahtar Kelimeler
Kaynakça
- 1. Aydın, S., 2012. Yapıştırıcı ile Birleştirilmiş Prizmatik Geçmeli Bağlantıların Mekanik Analizleri, Doktora Tezi, Fen Bilimleri Enstitüsü, Fırat Üniversitesi, Elazığ.
- 2. Hsiao, K.T., Alms, J., Advani, S.G., 2003. Use of Epoxy/multiwalled Carbon Nanotubes as Adhesives to Join Graphite Fibre Reinforced Polymer Composites. Nanotechnology 14, 791-793.
- 3. Panta, J., Jagannatham, M., Prathap, H., Ram, G.D.J., Deshpande, A.P., Bakshi, S.R., 2016. Effect of Different Carbon Nano-fillers on Rheological Properties and Lap Shear Strength of Epoxy Adhesive Joints Composites A, 82, 53–64.
- 4. Florian, G., Malte, W., Bodo, F., Schulte, K., 2005. Influence of Different Carbon Nanotubes on the Mechanical Properties of Epoxy Matrix Composites-A Comparative Study. Composites Science and Technology. 65, 2300-2313. 10.1016/j.compscitech.2005.04.021.
- 5. Saeed, M.B., Zhan, M.S., 2007. Adhesive Strength of Nano-size Particles Filled Thermoplastic Polyimides. Part-I: Multi-walled Carbon Nano-tubes (MWNT)-polyimide Composite Films, Int. J. Adhes. Adhes., 27, 306–318.
- 6. Lanlan, Z., Guoping, L., Jian, L., Youwen, W., 2006. The Effect of Nanoparticles on the Adhesion of Epoxy Adhesive, Materials Letters, 60, 3031–3033.
- 7. Gültekin K., Akpinar S., Gürses A., Eroglu Z., Cam S., Akbulut, H., Keskin, Z., Özel, A., 2016. The Effects of Graphene Nanostructure Reinforcement on the Adhesive Method and the Graphene Reinforcement Ratio on the Failure Load in Adhesively Bonded Joints, Composites Part B, 98, 362-369.
- 8. Akpinar, İ.A., Gültekin K., Akpinar, S., Akbulut, H., Özel, A., 2017. Research on Strength of Nanocomposite Adhesively Bonded Composite Joints, Composites Part B, 126, 143-152.
- 9. May, M., Wang, H.M., Akid, R., 2010. Effects of the Addition of Inorganic Nanoparticles on the Adhesive Strength of a Hybridsol-gel Epoxy System, International Journal of Adhesion & Adhesives, 30, 505–512.
- 10. Wernik, J.M., Meguid, S.A., 2014. On the Mechanical Characterization of Carbon Nanotube Reinforced Epoxy Adhesives. Materials & Design, 59(0), 19-32.
- 11. Razavi, S.M.J., Ayatollahi, M.R., Nemati, G.A., Khoramishad, H., 2018. Single Lap Joints Bonded with Structural Adhesives Reinforced with a Mixture of Silica Nanoparticles and Multi Walled Carbon Nanotubes, International Journal of Adhesion and Adhesives, 80, 76–86.
- 12. Douba, A., Genedy, M., Matteo, E.N., Kandil, U.F., Stormont, J., Reda, T.M.M., 2017. The Significance of Nanoparticles on Bond Strength of Polymer Concrete to Steel, International Journal of Adhesion & Adhesives, 74, 77–85.
- 13. Andrew, J., McNamara, Y.J., Zhuomin, M.Z., 2015. Thermal Resistance of Thermal Conductive Adhesive Anchored Carbon Nanotubes Interface Material, Int. J. Thermal Sci., 96, 221-226.
- 14. Suzhu, Y., Tong M.N., Critchlow, G., 2010. Use Ofcarbon Nanotubes Reinforced Epoxy as Adhesives to Join Aluminum Plates. Materials and Design, 31, 126-129.
- 15. C hena H., Jacobs O., Wua W., Rudiger G. Schadel B., 2007. Effect of Dispersion Method on Tribological Properties of Carbon Nanotube Reinforced Epoxy Resin Composites. Polymer Testing 26, 351–360.
- 16. Aydın, S., Fertelli, A., 2018. Nanopartikül ve Yüzey Pürüzlülüğünün Yapışma Mukavemetine Etkilerinin İncelenmesi, Academic Perspective Procedia, 1(1), 1164-1170.
Toplam 16 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 30 Eylül 2019 |
| Yayımlandığı Sayı | Yıl 2019 Cilt: 34 Sayı: 3 |