Resin cements and their usage areas

Yıl 2022, Cilt: 11 Sayı: 1, 71 - 77, 17.01.2022

Aslı Kaymaz A. Dilek Nalbant

https://doi.org/10.54617/adoklinikbilimler.927644

Öz

Advancements in dentistry foreground the importance of fixed dental prosthesis due to the climbing awareness of oral health among the patients. Fixed dental prosthesis came forward as a preferred method by decreasing the need for removable prosthesis and increasing aesthetical expectations. Recently, compared to traditional cementations, resin cement became the preferred method by dentists because of their superior chemical bonding, low microleakage and colour option properties. This review aims to provide an overview for resin cement, their kinds, and examine the recent developments.

Anahtar Kelimeler

adhesion, esthetics, resin cement

Rezin Simanlar ve Kullanım Alanları

Öz

Diş hekimliğindeki gelişmeler, hastaların daha bilinçli olmasına bağlı olarak ağız sağlığının daha önem kazanması ve hareketli protez ihtiyacının azalması, estetik beklentilerin artması sabit protetik restorasyonları ön plana çıkarmıştır. Sabit protetik restorasyonların başarısında da en önemli faktörlerden biri simantasyon işlemidir. Son yıllarda geleneksel simanlara oranla rezin simanlar kimyasal bağlantı, düşük mikrosızıntı, renk seçenekleri ile estetiğe katkıları gibi özellikleriyle hekimler tarafından daha çok tercih edilmektedir. Bu derlemenin amacı; rezin simanlara genel bir bakış ve rezin siman çeşitlerini değerlendirmek ve güncel gelişmeleri incelemektir.

Anahtar Kelimeler

adezyon, estetik, rezin siman

Kaynakça

• Referans1. Stamatacos, C. and Simon, J.F. (2013). Cementation of indirect restorations: an overview of resin cements. Compendium of continuing education in dentistry (Jamesburg, NJ: 1995), 34(1), 42-4, 46.
• Referans2. Powers, J. and O’Keefe, K. (2005). Cements: How to select the right one. Dent Prod Rep, 39, 76-78.
• Referans3. Jivraj, S.A., Kim, T.H., and Donovan, T.E. (2006). Selection of luting agents, part 1. CDA. JOURNAL, 34(2).
• Referans4. Dietschi, D. and Spreafico, R., (1997). Adhesive Metal Free Restorations. Quintessence Berlin, German.
• Referans5. Crispin, B.J., (1994). Contemporary esthetic dentistry: Practice fundamentals. Quintessence Pub Co.
• Referans6. White, S.N., Yu, Z., and Kipnis, V. (1992). Effect of seating force on film thickness of new adhesive luting agents. The Journal of prosthetic dentistry, 68(3), 476-481.
• Referans7. Zaimoğlu, A., Can, G., Ersoy, E., and Aksu, L. (1993). Diş hekimliğinde maddeler bilgisi. AÜ Basımevi, Ankara, 515.
• Referans8. Özel Bektaş,Ö., Siso,H., Eren,D. (2005) Işık Kaynakları, Polimerizasyon ve Klinik Uygulamalar. Curing Units, Polymerisation and Clinical Application, 26, 1–5.
• Referans9. Ebeid, K., Wille, S., Hamdy, A., Salah, T., El-Etreby, A., and Kern, M. (2014). Effect of changes in sintering parameters on monolithic translucent zirconia. Dental materials, 30(12), e419-e424.
• Referans10. Makkar, S., & Malhotra, N. (2013). Self-adhesive resin cements: a new perspective in luting technology. Dental Update, 40(9), 758–768.
• Referans11. Manso, A.P., Silva, N.R., Bonfante, E.A., Pegoraro, T.A., Dias, R.A., and Carvalho, R.M. (2011). Cements and adhesives for all-ceramic restorations. Dental Clinics, 55(2), 311-332.
• Referans12. Türk, A.G., Ulusoy, M., and Önal, B. (2014). İndirekt Restorasyonlarda Kullanılan Kompozit Rezin Simanlar. Ege Üniversitesi Dişhekimliği Fakültesi Dergisi, 35(2), 1-8.
• Referans13. Vanderlei, A., Passos, S.P., Özcan, M., Bottino, M.A., and Valandro, L.F. (2013). Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging. Journal of Prosthodontics: Implant, Esthetic and Reconstructive Dentistry, 22(3), 196-202.
• Referans14. Tamaç E (2014). CAD/CAM, lazer sinterizasyon ve konvansiyonel döküm yöntemleriyle üretilen metal alt yapılı seramik kronların marjinal ve internal uyumlarının in vivo ve in vitro olarak karşılaştırılması. Ege Üniversitesi Sağlık Bilimleri Enstitüsü, Doktora Tezi.
• Referans15. Powers, J.M., Sakaguchi, R.L., and Craig, R.G., (2012). Craig's restorative dental materials/edited by Ronald L. Sakaguchi, John M. Powers. Philadelphia, PA: Elsevier/Mosby.
• Referans16. Demi̇r, N , Kahveci̇oğlu, F , Karcı, M , Ülker, H , Günaydın, N . (2018). Kendinden bağlanabilen farklı adeziv rezin simanların sitotoksisitelerinin in vitro olarak değerlendirilmesi . Acta Odontologica Turcica , 35 (2) , 44-48 .
• Referans17. Gladwin, M. and Bagby, M., (2013). Clinical aspects of dental materials: theory, practice, and cases. Wolters Kluwer Health/ Lippincott Williams & Wilkins.
• Referans18. Zaimoğlu, A., Can, G. (2004). Sabit protezler. Ankara Üniversitesi Diş Hekimliği Fakültesi Yayınları, 24.
• Referans19. Hofmann, N., Hugo, B., Schubert, K., and Klaiber, B. (2000). Comparison between a plasma arc light source and conventional halogen curing units regarding flexural strength, modulus, and hardness of photoactivated resin composites. Clinical oral investigations, 4(3), 140-147.
• Referans20. El-Badrawy, W.A. and El-Mowafy, O.M. (1995). Chemical versus dual curing of resin inlay cements. The Journal of prosthetic dentistry, 73(6), 515-524.
• Referans21. Rueggeberg, F.A. (2002). From vulcanite to vinyl, a history of resins in restorative dentistry. The Journal of prosthetic dentistry, 87(4), 364-379.
• Referans22. Craig, R.G., Powers, J.M. (2002). Restorative Dental Materials. 11th Ed. Missouri: Mosby Chapter 3,9.
• Referans23. Anusavice, K.J. (2003). Phıllıps Science of Dental Materials. 11th Ed. Missouri: Saunders, Chapter 4.
• Referans24. Shortall, A., Baylis, R., Fisher, S., and Harrington, E. (1993). Operating variables affecting the working time of a dual-cure composite luting cement. The European journal of prosthodontics and restorative dentistry, 1(4), 185-188.
• Referans25. Ferrari, M., Vichi, A., and Feilzer, A. (2001). Materials and luting cements for indirect restorations.
• Referans26. Dikiciler, S. (2016). Diş hekimliğinde adezyon ve adeziv rezin simanlarda güncel yaklaşımlar. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 26(4), 152-158.
• Referans27. Van Landuyt KL, Nawrot T, Geebelen B, De Munck J, Snauwaert J, Yoshihara K, Scheers H, Godderis L, Hoet P, Van Meerbeek B. How much do resin-based dental materials release? A metaanalytical approach. Dent Mater 2011;27:723-47.
• Referans28. Ferracane JL, Stansbury JW, Burke FJ. Selfadhesive resin cements-chemistry, properties and clinical considerations. J Oral Rehabil 2011;38:295-314
• Referans29. De Munck, J.d., Van Landuyt, K., Peumans, M., Poitevin, A., Lambrechts, P., Braem, M., and Van Meerbeek, B. (2005). A critical review of the durability of adhesion to tooth tissue: methods and results. Journal of dental research, 84(2), 118-132.
• Referans30. Santos Jr, G.C., Santos, M.J.M.C., and Rizkalla, A.S. (2009). Adhesive cementation of etchable ceramic esthetic restorations. Journal of the Canadian Dental Association, 75(5).
• Referans31. Reis, A.F., Oliveira, M.T., Giannini, M., De, M.G., and Rueggeberg, F.A. (2003). The effect of organic solvents on one-bottle adhesives' bond strength to enamel and dentin. Operative dentistry, 28(6), 700-706.
• Referans32. Tay, F.R., Gwinnett, J.A., and Wei, S.H. (1997). The overwet phenomenon in two-component acetone-based primers containing aryl amine and carboxylic acid monomers. Dental Materials, 13(2), 118-127.
• Referans33. Simon, J.F. and Darnell, L.A. (2012). Considerations for proper selection of dental cements. Compendium of continuing education in dentistry (Jamesburg, NJ: 1995), 33(1), 28-30, 32, 34-5; quiz 36, 38.
• Referans34. Carville, R. and Quinn, F. (2008). The selection of adhesive systems for resin-based luting agents. Journal of the Irish Dental Association, 54(5).
• Referans35. Burgess, J.O., Ghuman, T., Cakir, D., and Swift, J., Edward J. (2010). Self‐adhesive resin cements. Journal of esthetic and restorative dentistry, 22(6), 412-419.
• Referans36. Salza, U., Zimmermann, J., and Salzer, T. (2005). Self-curing, self-etching adhesive cement systems. Journal of Adhesive Dentistry, 7(1).
• Referans37. Frankenberger, R., Kramer, N., and Petschelt, A. (2000). Technique sensitivity of dentin bonding: effect of application mistakes on bond strength and marginal adaptation. Operative dentistry, 25(4), 324-330.
• Referans38. Ferracane, J.L., Stansbury, J., and Burke, F.J.T. (2011). Self‐adhesive resin cements–chemistry, properties and clinical considerations. Journal of oral rehabilitation, 38(4), 295-314.
• Referans39. Pashley, D. H., Tay, F. R., Breschi, L., Tjäderhane, L., Carvalho, R. M., Carrilho, M., & Tezvergil-Mutluay, A. (2011). State of the art etch-and-rinse adhesives. Dental Materials, 27(1), 1–16.
• Referans40. Upadhyaya, V., Arora, A., Singhal, J., Kapur, S., and Sehgal, M. (2019). Comparative analysis of shear bond strength of lithium disilicate samples cemented using different resin cement systems: An in vitro study. The Journal of Indian Prosthodontic Society, 19(3), 240.
• Referans41. Cheong, C., King, N., Pashley, D.H., Ferrari, M., Toledano, M., and Tay, F. (2003). Incompatibility of self-etch adhesives with chemical/dual-cured composites: Two-step vs one-step systems. Operative dentistry, 28(6), 747-755.
• Referans42. Carvalho, R., Pegoraro, T., Tay, F., Pegoraro, L., Silva, N., and Pashley, D.H. (2004). Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. Journal of Dentistry, 32(1), 55-65.
• Referans43. Christensen, G.J. (2007). Should resin cements be used for every cementation? The Journal of the American Dental Association, 138(6), 817-819.
• Referans44. Miyazaki, M., Hinoura, K., Honjo, G., and Onose, H. (2002). Effect of self-etching primer application method on enamel bond strength. American Journal of Dentistry, 15(6), 412-416.
• Referans45. Sensat, M.L., Brackett, W.W., Meinberg, T.A., and Beatty, M.W. (2002). Clinical evaluation of two adhesive composite cements for the suppression of dentinal cold sensitivity. The Journal of prosthetic dentistry, 88(1), 50-53.
• Referans46. Kanehira, M., Finger, W.J., Hoffmann, M., and Komatsu, M. (2006). Compatibility between an all-in-one self-etching adhesive and a dual-cured resin luting cement. Journal of Adhesive Dentistry, 8(4).
• Referans47. Cekic, I., Ergun, G., Lassila, L.V., and Vallittu, P.K. (2007). Ceramic-dentin bonding: effect of adhesive systems and light-curing units. Journal of Adhesive Dentistry, 9(1).
• Referans48. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Operative Dentistry, 2003, 28: 215-235.
• Referans49. Radovic, I., Monticelli, F., Goracci, C., Vulicevic, Z.R., and Ferrari, M. (2008). Self-adhesive resin cements: a literature review. Journal of Adhesive Dentistry, 10(4).
• Referans50. Öz, Ö. P., Seçilmiş, A., Aydın, C.(2013). Adezyon ve Rezin Simanlar. ADO Klinik Bilimler Dergisi, 7(1), 1441-1447.