Experimental Investigation of Drawbead Effect on Springback in Profile of Double Circular, Rectangular and Triangular Bending Sheet Metal Forming Processes

Yıl 2021, Cilt: 5 Sayı: 1, 51 - 64, 30.06.2021

Duaa Mariza Süleyman Baştürk

https://doi.org/10.53600/ajesa.724818

Cited By: 1

Öz

Springback is considered as one of the most common problems in metal forming processes, which poses an inaccuracy of product angle during assembling of parts. The estimation of the springback is difficult to predict for formed parts since it depends on many factors such as the mechanical properties, the sheet thickness, and the die angle. In this work, an experimental investigation of drawbead for different material thicknesses and the use of different lubricants such as grease, oil and wax have been studied and analyzed. Samples of aluminum specimens with 120 mm length, 30 mm width and thickness of 0.5, 0.7 and 0.8 mm were selected in this study. Design and manufacturing of double bending die with profile of Circular, Rectangular, and Triangular have been applied firstly without drawbead and then with drawbead. The results showed that in a given profile configuration, the springback reduced with existing the drawbead

Anahtar Kelimeler

Springback, Drawbead, Sheet metal Forming, bending process, bending die

Destekleyen Kurum

altinbas

Proje Numarası

1

Teşekkür

Thanks to all the staff of the magazine, with my sincere appreciation

Bükme Sac Şekillendirme Proseslerinde Çift Dairesel, Dikdörtgen ve Üçgen Profildeki Çekme Çubuklarının Geri Yaylanma Üzerindeki Etkisinin Deneysel Olarak İncelenmesi

Öz

Proje Numarası

1

Kaynakça

• [1] Ekici, Bülent, and Erkan Tekeli. "Draw bead geometry optimization on springback of sheet forming." LS-DYNA. User forum, Bamberg, Germany. 2004.‏
• [2] Iwata, Takamichi, and Noritoshi Iwata. "A novel approach of springback analysis using a drawbead and a die shoulder database in sheet metal forming simulation." The International Journal of Advanced Manufacturing Technology 95.9-12 (2018): 3535-3547.‏
• [3] ‏ Xu, Siguang, Kunmin Zhao, Terry Lanker, Jimmy Zhang, and C. T. Wang. "Springback prediction, compensation and correlation for automotive stamping." In AIP Conference Proceedings, vol. 778, no. 1, pp. 345-352. American Institute of Physics, 2005.
• [4] Suhadiyana Hanapi, Abdul Rahman Omar, Roseleena Jaafar1, Wan Emri Wan Abdul Rahman,FarrahshaidaMohdSalleh, IzdiharTharazi,”, 2010 International conference on Science and Social Research (CSSR201), December 5-7, 2010, Kuala Lumpur, Malaysia.
• [5] Burchitz, Igor Alexandrovich. Improvement of springback prediction in sheet metal forming. Universiteit Twente, 2008.‏
• [6] Bhagyashri Billade and Sachine Dahake, “Design and Analysis of Draw Bead Profile in Sheet Metal Forming Of Reinf-Rr End Upr-Lh/Rh for Safe Thinning”,International Journal of Engineering Science Invention (IJESI), Volume 7 Issue 7 VerIV,| July 2018,| PP 01-10.
• [7] Firat, Mehmet, Haydar Livatyali, Orhan Cicek, and M. Fatih Onhon. "Process and Die Design of Panel Stampings with Segmented Drawbeads." Conference Paper October 2008.
• [8] Siswanto, Waluyo Adi, Agus Dwi Anggono, Badrul Omar, and Kamaruzaman Jusoff. "An alternate method to springback compensation for sheet metal forming." The Scientific World Journal 2014 (2014).
• [9] Özdemir, Mustafa. "Mathematical modeling of the effect of different parameters on spring back in sheet metal formability process." American Journal of Engineering Research (AJER) 6.10 (2017): 198-205.‏
• [10] Bakhshi-Jooybari, M., B. Rahmani, V. Daeezadeh, and A. Gorji. "The study of spring-back of CK67 steel sheet in V-die and U-die bending processes." Materials & Design 30, no. 7 (2009): 2410-2419.
• [11] Thipprakmas, Sutasn, and Wiriyakorn Phanitwong. "Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique." Materials & Design 32.8-9 (2011): 4430-4436.‏
• [12] Leu, Daw-Kwei, and Chung-Ming Hsieh. "The influence of coining force on spring-back reduction in V-die bending process." Journal of Materials Processing Technology 196.1-3 (2008): 230-235.‏
• [13] Abdullah, Mostafa Adel. "Spring Back Prediction in V-Die Bending Process Using Artificial Neural Network (ANN)" Al-Qadisiyah Journal for Engineering Sciences 10, no. 2 (2017): 180-190.
• [14] Asgari, S. A., M. Pereira, B. F. Rolfe, M. Dingle, and P. D. Hodgson. "Statistical analysis of finite element modeling in sheet metal forming and springback analysis." Journal of materials processing technology 203, no. 1-3 (2008): 129-136.