Araştırma Makalesi
BibTex RIS Kaynak Göster

PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE

Yıl 2009, Cilt: 9 Sayı: 3, 45 - 52, 01.12.2009

Öz

.

Kaynakça

  • Tütünlü, F., and Atalay, Ü., Utilization of fly ash in manufacturing of building bricks, International Ash Utilization Symposium, 2001 (http://whocares.caer.uky.edu/wasp/AshSymposium/AshLibraryAgenda.asp).
  • Özdemir, O., and Çelik, M.S., Characterization and recovery of lignitic fly ash by products from the Tunçbilek Power Station, Canadian Metallurgical Quarterly, 41(2), Pages 143-50, 2002,
  • Özdemir, O., Ersoy. B., and Çelik, M.S., Separation of pozzolonic material from lignitic fly ash of Tunçbilek power station, International Ash Utilization Symposium, 2001 (http://www.flyash.info/2001/benef1/45ozdem.pdf).
  • Iyer, R.S., and Scott, J.A., Power station fly ash-a review of value-added utilization outside of the construction industry, Resour Conserv & Recycl., 31, Pages 217-28, 2001
  • Sebök, T., Simonik, J., and Kulisek, K., The compressive strength of samples containing fly ash with high content of calcium sulfate and calcium oxide, Cem. Concr. Res., 31, Pages 1101-107. 2001
  • Kula, İ., Olgun, A., Erdoğan, Y., and Sevinç, V., Effects of colemanite waste, coal bottom ash, and fly ash on the properties of cement, Cem. Concr. Res., 31, Pages 491-94, 2001
  • Alonso, J.L., and Wesche, K., Characterization of fly ash, in: Wesche K. editor. Fly ash in concrete (properties and performance), E&FN Spon/Chapman&Hall, 1991
  • Yılmaz, S., Sen, S., Günay, V., and Özkan, O.T., Utilisation of power fly-ash as a building material,. Tile&Brick Int., 3 (4), Pages 297-00, 1997
  • Pirmaksa, K., Wilhelm, M., and Wruss, W., A new approach to the production of bricks made of 100 % fly ash, Tile&Brick Int., 16 (6), Pages 428-31, 2000
  • Kayali, O., High performance bricks from fly ash, International Ash Utilization Symposium, 2005, (http://www.flyash.info/2005/1kay.pdf)
  • Erol, M., Genç, A., Öveçoğlu, M.L., Yücelen, E., Küçükbayrak, S., and Taptık, Y., Characterization of a glass-ceramic produced from thermal power plant fly ashes, J Eur Ceram Soc, 20, Pages 2209-214, 2000
  • Sheng, J., Huang, B.X., Zhang, J., Zhang, H., Sheng, J., Yu, S., and Zhang, M., Production of glass from coal fly ash, Fuel, 82, Pages 181-85, 2003
  • Sheng, J., Vitrification of borate waste from nuclear power plant using coal fly ash, (I) Glass formulation development, Fuel 80, Pages 1365-69, 2001
  • Peng, F., Liang, K., Hu, A., and Shao, H., Nano-crystal glass-ceramics obtained by crystallization of vitrified coal fly ash, Fuel, 83, Pages 1973-77, 2004
  • Erol, M., Küçükbayrak, S., and Ersoy-Meriçboyu, A., Characterization of coal fly ash for possible utilization in glass production, Fuel, 86, Pages 706-14, 2007
  • Kumar, S., Fly ash-lime-phosphogypsum hollow blocks for walls and partitions, Build. Environ., 38, Pages 291-95, 2003
  • Ikeda, K., and Tomisaka, T., Physical properties of fgl, novel porous materials prepared from fly ash, gypsum and lime with special emphasis to the thermal conductivity, in: Proceedings Silicer’90 Silicate Ceramics, Ceramic Forum International, Pages, 84-91. 1990
  • Mukherji, S.K., Machhoya, B.B., Savsani, R.M., Vyas, D.R., and Dan, T.K., The utilization of fly ash in the preparation of ceramic tableware and artware, British Ceram Trans., 92 (6), Pages 254-57, 1993
  • Hwang, J.Y., Huang, X., and Hein, A.M., Synthesizing mullite from beneficiated fly ash, JOM, Pages 36-39, 1994
  • Yıldırım, M.S., Yaşar, B., and Cengiz, Y., Utilization of fly ash polypropylene waste in the production of a new porous composite material, J Porous Mater., 3, Pages 189-91, 1996
  • Ilic, M., Cheeseman, C., Sollars, C., and Knight, J., Mineralogy and microstructure of sintered lignite coal fly ash, Fuel, 82, Pages 331-36, 2003
  • Rahaman, M.N., Ceramic Processing and Sintering, Marcel Dekker Inc., 1995
  • Bayat, O., Characterization of Turkish fly ashes, Fuel, 77 (9/10), Pages 1059-66, 1998
  • Benavidez, E., Graselli, C., and Quaranta, N., Densification of ashes from a thermal power plant, Ceram. Int., 29, Pages 61-68, 2003
  • Mollah, M.Y.A., Promreuk, S., Schennach, R., Cocke, D.L., and Güler, R., Crystobalite formation from thermal treatment of Texas lignite fly ash, Fuel, 78, Pages 1277-282, 1999
  • Erol, M., Küçükbayrak, S., and Ersoy-Meriçboyu, A., Characterization of sintered coal fly ashes, Fuel, doi,10.1016/j.fuel., 2007.07.002 (in Press) 2007
  • Satapathy, L.N., The physical, thermal and phase identification studies of zirconia-flyash material, Ceram. Int., 24, Pages 199-203, 1998
  • Toydemir, N., Ceramic Building Materials (in Turkish), ITU-Publishing Center, 1991
  • Patnaik, P., Handbook of Inorganic Chemicals, Mc-Graw Hill, 2002
  • Katyal, N.K., Ahluwalia, S.C., and Parkash, R., Effect of barium on the formation of tricalcium silicate CEM, Coner. Res., 29, Pages 1857-62, 1999
  • Dei, L., Mauro, M., and Bitossi, G., Characterization of salt efflorescence in cultural heritage conservation by thermal analysis, Thermochim. Acta, 317, Pages 133-40, 1998
  • Kingery, W.D., Introduction to ceramics, John Wiley & Sons.Inc., 1960
  • Ingo, G.M., Chiozzini, G., Faccenda, V., Bemporad, E., and Riccucci, C., Thermal and microchemical characterizations of CaSO4-SiO2 investment materials for casting jewellery alloys, Thermochim. Acta, 321, Pages 175-83, 1998
  • ASTM C 618 (American society for testing and materials). Fly ash and raw or calcined natural pozzolan for use as, mineral admixture in portland cement concrete, ASTM, 1997
  • L’vov, B.V., and Ugolkov, V.L., Kinetics of free-surface decomposition of magnesium and barium sulfates analyzed thermogravimetrically by the third law method, Thermochim. Acta; 411, Pages 73-9, 2004
  • Merwe, E.M., Strydom, C.A., and Potgieter, J.H., Thermogravimetric analysis of the reaction between carbon and CaSO4.2H2O, gypsum and phosphogypsum in an inert atmosphere, Thermochim. Acta, Pages 340-341, 431-37, 1999
  • Torres, J., Mendez, J., and Sukiennik, M., Transformation enthalpy of the alkali-earths sulfates (SrSO4, CaSO4, MgSO4, BaSO4), Thermochim. Acta, 334, Pages 57-66. 1999
  • Hernandez-Crespo, M.S., and Rincon, J.Ma., New porcelainized stoneware materials obtained by recyling of msw incinerator fly ashes and granite sawing residues, Ceram.Int., 27, Pages 713-20, 2001
  • TS EN 14411, Ceramic tiles-definitions, classification, characteristics and marking, 2006.

PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE

Yıl 2009, Cilt: 9 Sayı: 3, 45 - 52, 01.12.2009

Öz

In this study, the effect of witherite (BaCO3) addition on the sintering of lignite coal fly ash taken from
the Seyitömer power plant of Kütahya/Turkey was examined at temperatures of 1100, 1150 and 1200
0
C in air atmosphere. Bloating of the fly ash samples sintered at 1150 0
C was prevented by shifting
the decomposition temperature of CaSO4 in the fly ash to a higher temperature, and their physicomechanical properties (porosity, water absorption, bulk density and bending strength) were improved
with BaCO3 addition owing to the phase transformation from CaSO4 (anhydrite) to BaSO4 (Barite) as
supported by XRD analysis. Positive effects of BaCO3, however, were not seen on the fly ash samples
sintered at 1100 0
C. All the fly ash samples sintered at 1200 0
C were bloated due to the gas evolving
during the thermal decomposition metal sulphates, and also they melted. 

Kaynakça

  • Tütünlü, F., and Atalay, Ü., Utilization of fly ash in manufacturing of building bricks, International Ash Utilization Symposium, 2001 (http://whocares.caer.uky.edu/wasp/AshSymposium/AshLibraryAgenda.asp).
  • Özdemir, O., and Çelik, M.S., Characterization and recovery of lignitic fly ash by products from the Tunçbilek Power Station, Canadian Metallurgical Quarterly, 41(2), Pages 143-50, 2002,
  • Özdemir, O., Ersoy. B., and Çelik, M.S., Separation of pozzolonic material from lignitic fly ash of Tunçbilek power station, International Ash Utilization Symposium, 2001 (http://www.flyash.info/2001/benef1/45ozdem.pdf).
  • Iyer, R.S., and Scott, J.A., Power station fly ash-a review of value-added utilization outside of the construction industry, Resour Conserv & Recycl., 31, Pages 217-28, 2001
  • Sebök, T., Simonik, J., and Kulisek, K., The compressive strength of samples containing fly ash with high content of calcium sulfate and calcium oxide, Cem. Concr. Res., 31, Pages 1101-107. 2001
  • Kula, İ., Olgun, A., Erdoğan, Y., and Sevinç, V., Effects of colemanite waste, coal bottom ash, and fly ash on the properties of cement, Cem. Concr. Res., 31, Pages 491-94, 2001
  • Alonso, J.L., and Wesche, K., Characterization of fly ash, in: Wesche K. editor. Fly ash in concrete (properties and performance), E&FN Spon/Chapman&Hall, 1991
  • Yılmaz, S., Sen, S., Günay, V., and Özkan, O.T., Utilisation of power fly-ash as a building material,. Tile&Brick Int., 3 (4), Pages 297-00, 1997
  • Pirmaksa, K., Wilhelm, M., and Wruss, W., A new approach to the production of bricks made of 100 % fly ash, Tile&Brick Int., 16 (6), Pages 428-31, 2000
  • Kayali, O., High performance bricks from fly ash, International Ash Utilization Symposium, 2005, (http://www.flyash.info/2005/1kay.pdf)
  • Erol, M., Genç, A., Öveçoğlu, M.L., Yücelen, E., Küçükbayrak, S., and Taptık, Y., Characterization of a glass-ceramic produced from thermal power plant fly ashes, J Eur Ceram Soc, 20, Pages 2209-214, 2000
  • Sheng, J., Huang, B.X., Zhang, J., Zhang, H., Sheng, J., Yu, S., and Zhang, M., Production of glass from coal fly ash, Fuel, 82, Pages 181-85, 2003
  • Sheng, J., Vitrification of borate waste from nuclear power plant using coal fly ash, (I) Glass formulation development, Fuel 80, Pages 1365-69, 2001
  • Peng, F., Liang, K., Hu, A., and Shao, H., Nano-crystal glass-ceramics obtained by crystallization of vitrified coal fly ash, Fuel, 83, Pages 1973-77, 2004
  • Erol, M., Küçükbayrak, S., and Ersoy-Meriçboyu, A., Characterization of coal fly ash for possible utilization in glass production, Fuel, 86, Pages 706-14, 2007
  • Kumar, S., Fly ash-lime-phosphogypsum hollow blocks for walls and partitions, Build. Environ., 38, Pages 291-95, 2003
  • Ikeda, K., and Tomisaka, T., Physical properties of fgl, novel porous materials prepared from fly ash, gypsum and lime with special emphasis to the thermal conductivity, in: Proceedings Silicer’90 Silicate Ceramics, Ceramic Forum International, Pages, 84-91. 1990
  • Mukherji, S.K., Machhoya, B.B., Savsani, R.M., Vyas, D.R., and Dan, T.K., The utilization of fly ash in the preparation of ceramic tableware and artware, British Ceram Trans., 92 (6), Pages 254-57, 1993
  • Hwang, J.Y., Huang, X., and Hein, A.M., Synthesizing mullite from beneficiated fly ash, JOM, Pages 36-39, 1994
  • Yıldırım, M.S., Yaşar, B., and Cengiz, Y., Utilization of fly ash polypropylene waste in the production of a new porous composite material, J Porous Mater., 3, Pages 189-91, 1996
  • Ilic, M., Cheeseman, C., Sollars, C., and Knight, J., Mineralogy and microstructure of sintered lignite coal fly ash, Fuel, 82, Pages 331-36, 2003
  • Rahaman, M.N., Ceramic Processing and Sintering, Marcel Dekker Inc., 1995
  • Bayat, O., Characterization of Turkish fly ashes, Fuel, 77 (9/10), Pages 1059-66, 1998
  • Benavidez, E., Graselli, C., and Quaranta, N., Densification of ashes from a thermal power plant, Ceram. Int., 29, Pages 61-68, 2003
  • Mollah, M.Y.A., Promreuk, S., Schennach, R., Cocke, D.L., and Güler, R., Crystobalite formation from thermal treatment of Texas lignite fly ash, Fuel, 78, Pages 1277-282, 1999
  • Erol, M., Küçükbayrak, S., and Ersoy-Meriçboyu, A., Characterization of sintered coal fly ashes, Fuel, doi,10.1016/j.fuel., 2007.07.002 (in Press) 2007
  • Satapathy, L.N., The physical, thermal and phase identification studies of zirconia-flyash material, Ceram. Int., 24, Pages 199-203, 1998
  • Toydemir, N., Ceramic Building Materials (in Turkish), ITU-Publishing Center, 1991
  • Patnaik, P., Handbook of Inorganic Chemicals, Mc-Graw Hill, 2002
  • Katyal, N.K., Ahluwalia, S.C., and Parkash, R., Effect of barium on the formation of tricalcium silicate CEM, Coner. Res., 29, Pages 1857-62, 1999
  • Dei, L., Mauro, M., and Bitossi, G., Characterization of salt efflorescence in cultural heritage conservation by thermal analysis, Thermochim. Acta, 317, Pages 133-40, 1998
  • Kingery, W.D., Introduction to ceramics, John Wiley & Sons.Inc., 1960
  • Ingo, G.M., Chiozzini, G., Faccenda, V., Bemporad, E., and Riccucci, C., Thermal and microchemical characterizations of CaSO4-SiO2 investment materials for casting jewellery alloys, Thermochim. Acta, 321, Pages 175-83, 1998
  • ASTM C 618 (American society for testing and materials). Fly ash and raw or calcined natural pozzolan for use as, mineral admixture in portland cement concrete, ASTM, 1997
  • L’vov, B.V., and Ugolkov, V.L., Kinetics of free-surface decomposition of magnesium and barium sulfates analyzed thermogravimetrically by the third law method, Thermochim. Acta; 411, Pages 73-9, 2004
  • Merwe, E.M., Strydom, C.A., and Potgieter, J.H., Thermogravimetric analysis of the reaction between carbon and CaSO4.2H2O, gypsum and phosphogypsum in an inert atmosphere, Thermochim. Acta, Pages 340-341, 431-37, 1999
  • Torres, J., Mendez, J., and Sukiennik, M., Transformation enthalpy of the alkali-earths sulfates (SrSO4, CaSO4, MgSO4, BaSO4), Thermochim. Acta, 334, Pages 57-66. 1999
  • Hernandez-Crespo, M.S., and Rincon, J.Ma., New porcelainized stoneware materials obtained by recyling of msw incinerator fly ashes and granite sawing residues, Ceram.Int., 27, Pages 713-20, 2001
  • TS EN 14411, Ceramic tiles-definitions, classification, characteristics and marking, 2006.
Toplam 39 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Makaleler
Yazarlar

Bahri Ersoy Bu kişi benim

Taner Kavas Bu kişi benim

Atila Evcin Bu kişi benim

Serhat Başpınar Bu kişi benim

Ali Sarıışık Bu kişi benim

Sedef Dikmen Bu kişi benim

Yayımlanma Tarihi 1 Aralık 2009
Gönderilme Tarihi 8 Ağustos 2015
Yayımlandığı Sayı Yıl 2009 Cilt: 9 Sayı: 3

Kaynak Göster

APA Ersoy, B., Kavas, T., Evcin, A., Başpınar, S., vd. (2009). PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 9(3), 45-52.
AMA Ersoy B, Kavas T, Evcin A, Başpınar S, Sarıışık A, Dikmen S. PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. Aralık 2009;9(3):45-52.
Chicago Ersoy, Bahri, Taner Kavas, Atila Evcin, Serhat Başpınar, Ali Sarıışık, ve Sedef Dikmen. “PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 9, sy. 3 (Aralık 2009): 45-52.
EndNote Ersoy B, Kavas T, Evcin A, Başpınar S, Sarıışık A, Dikmen S (01 Aralık 2009) PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 9 3 45–52.
IEEE B. Ersoy, T. Kavas, A. Evcin, S. Başpınar, A. Sarıışık, ve S. Dikmen, “PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE”, Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, c. 9, sy. 3, ss. 45–52, 2009.
ISNAD Ersoy, Bahri vd. “PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 9/3 (Aralık 2009), 45-52.
JAMA Ersoy B, Kavas T, Evcin A, Başpınar S, Sarıışık A, Dikmen S. PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. 2009;9:45–52.
MLA Ersoy, Bahri vd. “PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, c. 9, sy. 3, 2009, ss. 45-52.
Vancouver Ersoy B, Kavas T, Evcin A, Başpınar S, Sarıışık A, Dikmen S. PRODUCTION OF FIRED CERAMIC MATERIALS FROM FLY ASH WITH WITHERITE ADDITIVE. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. 2009;9(3):45-52.