Investigation of the Relationships between Mineralogical and the Engineering Parameters of Rocks

Yıl 2019, Cilt: 19 Sayı: 1, 248 - 255, 28.05.2019

Kadir Karaman , İbrahim Alp , Ayhan Kesimal , Ali Osman Yılmaz

https://doi.org/10.35414/akufemubid.476920

Öz

This
study focuses on the investigation of the relationships between mineralogical
(content, average and largest grain diameter) and engineering parameters of
rocks. Polished section analyses of rocks were performed via clemex image
analysis system and motorized table which are integrated into the trinocular
research microscope that is a modern technique. Strong correlations
(r=0.76–0.81) were found between largest grain diameters of pyrite and
engineering parameters. The correlation degree between pyrite content and the
engineering parameters was generally obtained as moderate (r=0.52–0.71). The
similar correlation (r=0.47– 0.70) between average grain diameters of pyrite
and engineering parameters was determined. Meaningful relationships between the
internal friction angle (f) with the average and largest grain diameter
was found as 0.47 and 0.86, respectively. These results demonstrated that the
presence of pyrite in the rocks can affect the engineering parameters of the
rocks.    

Anahtar Kelimeler

Pyrite ratio, Engineering parameter, Clemex image system, Motorized table

Kaynakça

• Allen, K.G. von Backström, T.W. Kröger, D.G., Kisters, A.F.M., 2014. Rock bed storage for solar thermal power plants: rock characteristics, suitability, and availability. Solar Energy Mater Solar Cells, vol. 126, pp. 170–83.
• Beyhan, S. 2008. G.L.İ. ve E.L.İ. Marn Kaya Malzemelerinin Üç Eksenli Basınç Dayanımına Bağlı Özelliklerinin Belirlenmesi, Doktora Tezi, Eskişehir Osmangazi Üniversitesi Fen Bilimleri Enstitüsü, 224 s.
• Brace, W.F., 1961. Dependence of fracture strength of rocks on grain size. In: Proc. 4th Symp. Rock Mech., Univ. Park, Penn., PA, pp. 99–103.
• Fener, M. Kahraman, S. Bilgil, A. Gunaydin, O., 2005. A Comparative Evaluation of Indirect Methods to Estimate the Compressive Strength of Rocks. Rock Mechanics and Rock Engineering, 38, 4, 329-343.
• Hamid, M.A. Draz, W.M. Ismael, A.F. Gouda, M. A. Sleem, S.M., 2015. Effect of Petrographical Characteristics on the Engineering Properties of Some Egyptian Ornamental Stones. International Journal of Scientific & Engineering Research, vol. 6 pp. 116–123.
• Hugman, R.H. and Friedman, M., 1979. Effects of texture and composition on mechanical behaviorof experimentally deformed carbonate rocks. Association of Petroleum Geological Bulletin, vol. 63, no. 9. pp. 1478–1489.
• İrfan, T.Y., 1996. Mineralogy, fabric properties and classification of weathered granites in Hong Kong. Q. J. Eng. Geol. 29 pp. 5–35.
• ISRM., 2007. The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974–2006. In: Ulusay, Hudson (Eds.), Suggested Methods Prepared by the Commission on Testing Methods, International Society for Rock Mechanics. ISRM Turkish National Group, Ankara, Turkey, 628.
• Kahraman, S., 2001. Evaluation of Simple Methods for Assessing the Uniaxial Compressive Strength of Rock. International Journal of Rock Mechanics and Mining Sciences, 38 pp. 991-994.
• Karaman, K. and Kesimal, A., 2015a. Correlation of Schmidt Rebound Hardness with Uniaxial Compressive Strength and P-wave Velocity of Rock Materials, Arabian Journal for Science and Engineering, 40 pp. 1897–1906.
• Karaman, K. and Kesimal, A. 2015b. A Comparative Study of Schmidt Hammer Test Methods for Estimating the Uniaxial Compressive Strength of Rocks. Bulletin of Engineering Geology and the Environment, 74, 2, pp. 507–520.
• Karaman, K. Cihangir, F. Ercikdi, B. Kesimal, A. Demirel, S., 2015. Utilization of Brazilian Test for Estimating the Uniaxial Compressive Strength and Shear Strength Parameters. The Southern African Institute of Mining and Metallurgy, 115, pp. 185–192.
• Karaman, K. Şahinoğlu, E. Alp İ., Kesimal, A. Yilmaz A.O., 2017. İleri Mikroskopi Yöntemleri ile Parlak Kesit Analizleri, 2 nd International Science Symposium Science Festival ISS2017, Tiflis, GURCISTAN, 5-8 Eylül, pp.53-53.
• Keikha, T. and Keikha, H.A., 2013. Correlation between Mineralogical Characteristics and Engineering Properties of Granitic Rocks. EJGE, 18 pp. 4055 – 4065. Kılıç, A. and Teymen, A., 2008. Determination of Mechanical Properties of Rocks Using Simple Methods. Bulletin of Engineering Geology and the Environment, 67 pp. 237-244.
• Mishra, D.A. and Basu, A., 2012. Use of the Block Punch Test to Predict the Compressive and Tensile Strengths of Rocks. International Journal of Rock Mechanics and Mining Sciences, 51 pp. 119–127.
• Ocak, İ., 2008. Estimating the Modulus of Elasticity of the Rock Material from Compressive Strength and Unit Weight. The Southern African Institute of Mining and Metallurgy. vol. 108 pp. 621–626.
• Onodera, T.F. and Asoka Kumara, H.M., 1980. Relation between texture and mechanical properties of crystalline rocks. Bull. Int. Assoc. Eng. Geol. vol. 22 pp. 173–177.
• Özdamar, K., 2011. Paket Programlar ile İstatistiksel Veri Analizi. Kaan Kitabevi, 8. Baskı, 624 s.
• Price, N.J., 1960. The compressive strength of coal measure rocks. Coll Eng, 37, 283–92.
• Prikryl, R., 2001. Some microstructural aspects of strength variation in rocks. International Journal of Rock Mechanics and Mining Sciences, vol 38 pp. 671–682.
• Shakoor, A. and Bonelli, R.E., 1991. Relationship between petrographic characteristics, engineering index properties, and mechanical properties of selected sandstones. Bull. Assoc. Eng. Geologists, v.28, pp.55-71.
• Singh, T.N. Kainthola, A. and Venkatesh, A., 2012. Correlation between point load index and uniaxial compressive strength for different rock types. Rock Mechanics and Rock Engineering, 45, 2, pp. 259–264.
• Sousa, L.M.O., 2013. The influence of the characteristics of quartz and mineral deterioration on the strength of granitic dimensional Stones. Environmental Earth Sciences, 69 pp. 1333–1346.
• Sonmez, H. Tuncay, E. Gokceoglu, C., 2004. Models to predict the uniaxial compressive strength and the modulus of elasticity for Ankara Agglomerate. International Journal of Rock Mechanics & Mining Sciences, 41, pp. 717–729.
• Tugrul, A. and Zarif, I.H., 1999. Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey, Engineering Geology, vol. 51 pp. 303–317.
• Yagiz, S., 2011. P-wave velocity test for assessment of geotechnical properties of some rock materials, Bulletin of Material Science, vol. 34 pp. 947–953.
• Yilmaz, I. and Sendir, H., 2002. Correlation of Schmidt Hardness with Unconfined Compressive Strength and Young’s Modulus in Gypsum from Sivas (Turkey), Engineering Geology, vol. 66 pp. 211–219.