Investigation of the Effects of SiC Al2O3 ve Eggshell Powder Reinforcement on the Hardness and Tensile Strength of Al6061 Matrix Hybrid Composites

Yıl 2023, Cilt: 23 Sayı: 5, 1307 - 1317, 30.10.2023

Akif Tok Serkan Ateş

https://doi.org/10.35414/akufemubid.1277913

Öz

The aim of this study is to develop an environmentally friendly, and cost-effective aluminum matrix
composite using reinforcement from readily available waste. Since chicken eggshell is an industrial
waste that causes serious environmental hazards if not disposed of, this study investigated its
compatibility with conventional reinforcement materials such as SiC ve Al2O3 as well as its compatibility
as a reinforcement material. In this concept, hybrid composites with Al6061 matrix, eggshell powder,
SiC and Al2O3 reinforcement were produced using two-stage stir casting method. The composites were
produced using reinforcements with 22-59µm powder size at reinforcement-to-volume ratios of 1, 3, 5
wt%, 4, 6, 8 wt% for binary hybrid composites ve 7, 9, 11 wt% for triple hybrid composites. The
microstructures of the composites were monitored by scanning electron microscopy to determine the
presence of reinforcements. The hardness of the composites was examined by using Brinell hardness
measurement method, while ultimate tensile stress and elongation were determined by tensile test. It
was observed that the hardness, ultimate tensile stress increased and the elongation decreased with
the increase of eggshell powder by weight in the composite.

Anahtar Kelimeler

Composite, Stir Casting, Eggshell Powder, Mechanical Properties

Al6061 Matrisli Hibrit Kompozitlerin Sertlik ve Çekme Dayanımına SiC Al2O3 ve Yumurta Kabuğu Tozu Takviyesinin Etkilerinin İncelenmesi

Öz

Bu çalışmanın amacı kolayca bulunabilen atıklardan elde edilen takviye kullanarak çevre dostu ve uygun
maliyetli alüminyum matrisli kompozit geliştirmektir. Tavuk yumurtası kabuğu, bertaraf edilmediği
takdirde ciddi çevresel tehlikeye neden olan endüstriyel bir atık olduğundan bu çalışmada takviye
malzemesi olarak kullanılabilirliğinin yanı sıra SiC ve Al2O3 gibi geleneksel takviye malzemeleri ile uyumu
da araştırılmıştır. Bu kapsamda hibrit kompozit üretimi için iki kademeli karıştırmalı döküm yöntemi
kullanılarak, Al6061 matrisli, yumurta kabuğu tozu, SiC ve Al2O3 takviyeli hibrit kompozitler üretilmiştir.
Kompozitler ağırlıkça %1, 3, 5, ikili hibrit kompozitler ağırlıkça %4, 6, 8 ve üçlü hibrit kompozitler ise
ağırlıkça %7, 9, 11 takviye-hacim oranlarında 22-59µm toz boyutuna sahip takviyeler kullanılarak
üretilmiştir. Üretilen kompozitlerin mikro yapıları taramalı elektron mikroskobu ile görüntülenerek
takviyelerin varlığı tespit edilmiştir. Kompozitlerin sertlikleri Brinell sertlik ölçüm yöntemi kullanılarak,
maksimum çekme gerilmeleri ve birim uzama miktarları ise çekme testi ile belirlenmiştir. Kompozit
içerisinde ağırlıkça yumurta kabuğu tozunun artması ile sertlik ve maksimum çekme gerilmesi artarken,
birim uzama miktarının azaldığı belirlenmiştir.

Anahtar Kelimeler

kompozit, Karıştırmalı Döküm, Yumurta Kabuğu Tozu, Mekanik Özellikler

Kaynakça

• Alaneme, K.K. and Bamike B.J., 2018. Characterization of mechanical and wear properties of aluminium based composites reinforced with quarry dust and silicon carbide. Ain Shams Engineering Journal, 9(4), 2815-2821.
• Amal Bashir, S.M.A. and Manusamy, Y., 2015. Characterization of raw egg shell powder (ESP) as a good bio-filler. Journal Of Engineering Research And Technology. 2(1), 56-60.
• Aribo, S., Omotoyinbo, J.A. and Folorunso, D.O., 2011. High temperature mechanical properties of silicon carbide particulate reinforced cast aluminium alloy composite. Leonardo Electronic Journal of Practices and Technologies, 18, 9-16.
• Balaraj, V., Kori, N., Nagaral, M. and Auradi, V., 2021. Microstructural evolution and mechanical characterization of micro Al2O3 particles reinforced Al6061 alloy metal composites. Materials Today: Proceedings, 47, 5959-5965
• Bharath, V., Nagaral, M., Auradi, V. and Koric, S.A., 2014. Preparation of 6061al-Al2O3 MMC’s by stir casting and evaluation of mechanical and wear properties. Procedia Materials Science, 6, 1658-1667.
• Bhat, A., Kakandikar, G., Deshpande, A., Kulkarni, A. and Thakur, D., 2021. Characterization of Al2O3 reinforced Al 6061 metal matrix composite. Material Science Engineering and Applications, 1(1), 11-20.
• Bose, S., Pandey, A. and Mondal, A., 2018. Comparative analysis on aluminum-silicon carbide hybrid green metal matrix composite materials using waste egg shells and snail shell ash as reinforcements. Materials Today: Proceedings, 5, 27757-27766.
• Chaithanyasai, A., Vakchore, P.R. and Umasankar, V., 2014. The micro structural and mechanical property study of effects of egg Shell particles on the aluminum 6061. Procedia Engineering, 1(97), 961-967.
• Chawla, K.K., 2012. Composite Materials: Science and Engineering. Springer, 197-248.
• Chelladurai, S.J.S., Arthanari, R., Krishnamoorthy, R., Selvaraj, K.S. and Govindan, P., 2018. Effect of copper coating and reinforcement orientation on mechanical properties of LM6 aluminium alloy composites reinforced with steel mesh by squeeze casting. Transactions of the Indian Institute of Metals, 71(5), 1041-1048.
• Daoud, A., Abou-Elkhair, M.T. and Rohatgi, P., 2004. Wear and friction behavior of near eutectic Al–Si+ZrO2 or WC particle composites. Composite Science and Technology, 64(7-8), 1029-1040.
• Dwivedi, S.P., Sharma, S. and Mishra, R.K., 2016. Characterization of waste eggshells and CaCO3 reinforced AA2014 green metal matrix composites : A green approach in the synthesis of composites. International Journal of Precision Engineering and Manufacturing, 17, 1383-1393. Elaheh, M., Asadollah, H., Sadegh, P. and Dadkhoda, G., 2013. Ball mill-assisted preparation of nano-CaCO3 as a novel and green catalyst–based eggshell waste a green approach in the synthesis of pyrano [4,3-b] pyrans. International Journal of Green Nanotechnology, 1, 1-5.
• Ghabeer, T., Dweiri, R. And Al-Khateeb, S., 2013. Thermal and mechanical characterization of polypropylene/eggshell biocomposites. Journal of Reinforced Plastics and Composites, 32(6), 402-409.
• Gündoğan, K. ve Özsarı, A.R.B., 2019. Basınçlı infiltrasyon yöntemiyle üretilen AA2024 ve AA6061 matrisli, B4C ve SiC takviyeli kompozit malzemelerin mikro yapı, mekanik ve ısıl iletkenlik özelliklerine basıncın etkisi. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi. 11(2), 657-669.
• Hashim, J., Looney, L. and Hashmi, M.S., 1999. Metal matrix composites: production by the stir casting method. The Journal of Materials Processing Technology, 30, 1-7.
• Hassan, S.B. and Aigbodion, V.S., 2015. Effects of eggshell on the microstructures and properties of Al-Cu-Mg/eggshell particulate composites. Journal of King Saud University - Engineering Sciences, 27, 49-56.
• Hassan, T.A., Rangari, V.K., Rana, R.K. and Jeelani, S., 2013. Sonochemical effect on size reduction of CaCO3 nanoparticles derived from waste eggshells. Ultrasonics Sonochemistry, 20(5), 1308-1315.
• Hayat, M.D., Singh, H., He, Z. and Cao, P., 2019. Titanium metal matrix composites: An overview. Composites Part A: Applied Science and Manufacturing, 121, 418-438.
• Jannet, S.R., Ruban, S.R., Khosla, S., Sasikumar, U., Sai, N.B. and Teja, P.M., 2021. Effect of egg shell powder on the mechanical and microstructure properties of AA 2024 metal matrix composite. Materials Today: Proceedings, 44(1), 135-140.
• Josephand, O.O. and Babaremu, K.O., 2019. Agricultural waste as a reinforcement particulate for aluminum metal matrix composite (AMMCs): A Review. Fibers, 7(4), 1-9.
• Kala, H., Mer, K.K. and Kumar, S., 2014. A review on mechanical and tribological behaviors of stir cast aluminum matrix composites. Procedia Materials Science, 6, 1951-1960.
• Kandpal, B.C. and Singh, H., 2017. Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by stir casting. Materials Today: Proceedings, 4(2), 2783-2792.
• Kumar, P., Kumar, B.P.V., Joshia, R., Manjunathaa, T.H. and Kumar R.S., 2018. Evaluation of Al7075 reinforced with sic for its mechanical properties and surface roughness by drilling. Materials Today: Proceedings, 5, 25121-25129.
• Latha Shankar, B., Anil, K.C. and Patil, R., 2016. A study on 3-body abrasive wear behaviour of aluminium 8011/graphite metal matrix composite. IOP Conf. Series: Materials Science and Engineering, 149, 1-6
• Marin, E., Lekka, M., Andreatta, F., Fedrizzi, I., Itskos, G., Moutsatsou, A., Koukouzas, N. and Kouloumbi, N., 2012. Electrochemical study of aluminum fly ash composite obtained by powder metallurgy. Materials Characterization, 69, 16-30.
• Murthy, P.S.R. and Rao, Y.S.R., 2019. Evaluation of mechanical properties of aluminum alloy-alumina-boron carbide metal matrix composites. World Journal of Mechanical Engineering, 4(1), 027-034.
• Murthy, P.S.R. and Rao, Y.S.R., 2020. Influence of reinforcement types on mechanical properties of hybrid aluminum alloy. Annals of the Faculty of Engineering Hunedoara, 18(4), 155-160.
• Naidich, Y.V., Zhuravlev, V. and Krasovskaya, N., 1998. The wettability of silicon carbide by Au–Si alloys. Material Scienceand Engineering: A, 245(2), 293-299.
• Nieto, A., Yang, H., Jiang, L. and Schoenung, J.M., 2017. Reinforcement size effects on the abrasive wear of boron carbide reinforced aluminum composites. Wear, 390-391, 228-235.
• Prasad, V.V.B., Prasad, K.S., Kurovilla, A.K., Pandey, A.B., Bhat, B.V.R. and Mahajan, Y.R., 1991. Composite strengthening in 6061 and Al-4 Mg alloys. Journal of Material Science, 26, 460-465.
• Sachin, D., Uday, K.N., Rajamurugan, G. and Krishnasamy, P., 2021. Effect of SiC reinforcement on the mechanical and tribological behaviour of Al6061 metal matrix composites. Materials Today: Proceedings, 46, 7082-7089.
• Saravanan, S., Ravichandran, M., Balan A.V. and Senthilkumar. P., 2019. Synthesis and abrasive wear performance of stir cast AA6063-TiC composite materials. SN Applied Sciences, 1(12), 1-7.
• Selvam, J.D.R., Smart, D.S.R. and Dinaharan, I., 2013. Microstructure and some mechanical properties of fly ash particulate reinforced AA aluminum alloy composites prepared by compocasting. Material Design, 49, 28-34.
• Şahin, Y., 2000. Kompozit Malzemelere Giriş. Gazi Kitabevi, 10-12. Trinh, P.V., Lee, J., Minh, P.N., Phuong, D.D. and Hong, S.H., 2018. Effect of oxidation of SiC particles on mechanical properties and wear behavior of SiCp/Al6061 composites. Journal of Alloys and Compounds, 769, 282-292.
• TÜİK., 2022. Kümes hayvancılığı üretimi. Haber Bülteni. Verma, V., Nıshant and Gıll, M., 2018. Effects of waste eggshells and silicon carbide addition in the synthesis of aluminium alloy 6061 hybrid green metal matrix composite. International Research Journal of Engineering and Technology, 5(6), 1413-1419.
• Wang, Z., Tan, J., Sun, BA., Scudino, S., Prashanth, K.G., Zhang, W.W., Li, Y.Y. and Eckert, J., 2014. Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles. Engineering: A, 600(10), 53-58.
• https://asm.matweb.com, (03.04.2023)