In this study, graphical solutions were prepared for determining lateral and manifold pipe diameters to obtain an acceptable water distribution in drip inigation. It was suggested that pipe diameters should be chosen when Christiansen's uniformity coeffı cient, C„, was equal or greater than 98% and 97.5% for lateral and manifold pipe Iines, respectively. Design charts which uniformity coefficient could be directly found were giyen for different lateral and manifold pipe diameters.
Drip irrigation lateral manifold uniformity coefficient graphical method
Bu çalışmada, damla sulama sistemlerinde, kabul edilebilir düzeyde e ş su dağı l ı m ı sağ lamak amacı yla, lateral ve manifold boru çaplar ı n ı n belirlenmesine yönelik grafiksel çözümler haz ı rlanmışt ı r. Christiansen eş dağı l ı m katsay ı s ı n ı n, lateral boru hatlar ı için Cu %98 ve manifold boru hatlar ı için C„ % 97.5 koşulları n ı sağ layan boru çapları n ı n seçilmesi önerilmiştir. Farkl ı boru çapian için Co eş dağı l ı m katsayı.s ı n ı n doğrudan bulunabileceği grafikleı. verilmiştir.
Damla sulama lateral manifold eş dağılım katsayısı grafiksel yöntem
Birincil Dil | Türkçe |
---|---|
Bölüm | Research Article |
Yazarlar | |
Yayımlanma Tarihi | 1 Ocak 1999 |
Yayımlandığı Sayı | Yıl 1999 Cilt: 05 Sayı: 01 |
Journal of Agricultural Sciences is published open access journal. All articles are published under the terms of the Creative Commons Attribution License (CC BY).