BibTex RIS Kaynak Göster

Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının

Yıl 2013, Cilt: 23 Sayı: 3, 324 - 330, 01.03.2013

Yrd.doç.dr. Çağatay Barutcigil Yrd.doç.dr. Duygu Kürklü Arş.gör.dt. Kubilay Barutcigil Yrd.doç.dr. Hakan Arslan

Öz

Aim: The aim of this study was to evaluate shear bond strengths of new universal adhesive within selfetch and etch-and-rinse strategies on Erbium, Chromium doped Yttrium Scandium Gallium Garnet (Er,Cr:YSGG) laser irradiation dentin surface. Materials and Methods: 60 sound, human third molars were selected and the occlusal enamel of these molars was removed. Those teeth were divided into six groups according to the surface conditioning; Group A: Control (Self-etch mode), Group B: 35% phosphoric acid etching (Etch-and-rinse mode), Group C: 1,25W Er,Cr:YSGG laser irradiation, Group D: 1,5W Er,Cr:YSGG laser irradiation, Group E: 2W Er,Cr:YSGG laser irradiation, finally, Group F: 3W Er,Cr:YSGG laser irradiation. After surface conditioning, new universal adhesive (3M Single Bond Universal, 3M ESPE St.Paul, MN, USA - SBU) was applied to all dentin samples surface and resin composite (Z250 3M ESPE St.Paul, MN, USA) built up and shear bond strength test was performed. Data were analyzed using one-way ANOVA and Tukey HSD multiple compression test. p<0.05 was consider statistically significant. Results: Prior to phosphoric acid etching significantly increased the bonding effectiveness of the SBU to dentin. (p<0.05). However, Er,Cr:YSGG laser irradiation was decreased the bond strength values of SBU with all power settings. Conclusion: While using etch-and-rinse mode definitely improved bonding of the new universal adhesive to dentin, Er,Cr:YSGG laser irradiation cannot be considered as an alternative for surface treatment methods.

Anahtar Kelimeler

Shear Strength YSGG Lasers Dentin Bonding agents.

Kaynakça

  • Van Meerbeek B, De Munck J, Yoshida Y, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003;28:215-35.
  • Peumans M, Kanumilli P, De Munck J, et al. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Reis A, Pellizzaro A, Dal-Bianco K, et al. Impact of adhesive application to wet and dry dentin on long-term resin-dentin bond strengths. Oper Dent 2007;32:380-7.
  • Dal-Bianco K, Pellizzaro A, Patzlaft R, et al. Effects of moisture degree and rubbing action on the immediate resin-dentin bond strength. Dent Mater 2006;22:1150-6.
  • Spencer P, Swafford JR. Unprotected protein at the dentin-adhesive interface. Quintessence Int 1999;30:501-7.
  • Pioch T, Staehle HJ, Wurst M, Duschner H, Dorfer C. The nanoleakage phenomenon: influence of moist vs dry bonding. J Adhes Dent 2002;4:23-30.
  • Sano H. Microtensile testing, nanoleakage, and biodegradation of resin-dentin bonds. J Dent Res 2006;85:11-4.
  • Breschi L, Mazzoni A, Ruggeri A, et al. Dental adhesion review: aging and stability of the bonded interface. Dent Mater 2008;24:90-101.
  • Hashimoto M, Ohno H, Kaga M, et al. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 2000;79:1385-91.
  • Peumans M, De Munck J, Van Landuyt KL, et al. Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching. Dent Mater 2010;26:1176-84.
  • Erickson RL, Barkmeier WW, Latta MA. The role of etching in bonding to enamel: A comparison of self-etching and etch-and-rinse adhesive systems. Dent Mater 2009;25:1459-67.
  • Hanabusa M, Mine A, Kuboki T, et al. Bonding effectiveness of a new 'multi-mode' adhesive to enamel and dentine. J Dent 2012;40:475-84.
  • Perdigao J, Sezinando A, Monteiro PC. Laboratory bonding ability of a multi-purpose dentin adhesive. Am J Dent 2012;25:153-8.
  • Lee BS, Lin PY, Chen MH, et al. Tensile bond strength of Er,Cr:YSGG laser-irradiated human dentin and analysis of dentin-resin interface. Dent Mater 2007;23:570-8.
  • Karaarslan EŞ, Yıldırım C, Üşümez A. Restoratif tedavide lazer uygulamaları. Atatürk Üniv Diş Hek Fak Derg 2012;22:340-9.
  • Chimello-Sousa DT, de Souza AE, Chinelatti MA, et al. Influence of Er : YAG laser irradiation distance on the bond strength of a restorative system to enamel. J Dent 2006;34:245-51.
  • Hossain M, Nakamura Y, Tamaki Y, et al. Atomic analysis and knoop hardness measurement of the cavity floor prepared by Er,Cr:YSGG laser irradiation in vitro. J Oral Rehabil 2003;30:515-21. Chenard T, Amodeo M, Caputo AA, Rizoiu I. Composite resin bond strength to primary dentin prepared with Er,Cr : YSGG laser. J Dent Res 2003;82:B333-B33.
  • Uysal D, Güler Ç. Diş Hekimliğinde lazer: Bir literatür derlemesi. Atatürk Üniv Diş Hek Fak Derg 2012; Suppl 6:44-53.
  • Hossain M, Nakamura Y, Yamada Y, et al. Analysis of surface roughness of enamel and dentin after Er,Cr:YSGG laser irradiation. J Clin Laser Med Surg 2001;19:297-303.
  • De Munck J, Van Meerbeek B, Yudhira R, Lambrechts P, Vanherle G. Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin. Eur J Oral Sci 2002;110:322-9.
  • Bertrand MF, Semez G, Leforestier E, et al. Er : YAG laser cavity preparation and composite resin bonding with a single-component adhesive system: Relationship between shear bond strength and microleakage. Lasers Surg Med 2006;38:615-23.
  • De Munck J, Van Landuyt K, Peumans M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 2005;84:118-32.
  • Moll K, Fritzenschaft A, Haller B. In vitro comparison of dentin bonding systems: effect of testing method and operator. Quintessence Int 2004;35:845-52.
  • Swift EJ, Jr., Perdigao J, Heymann HO. Bonding to enamel and dentin: a brief history and state of the art, 1995. Quintessence Int 1995;26:95-110.
  • Erickson RL, Barkmeier WW, Latta MA. The role of etching in bonding to enamel: a comparison of self-etching and etch-and-rinse adhesive systems. Dent Mater 2009;25:1459-67.
  • Yoshida Y, Yoshihara K, Nagaoka N, et al. Selfassembled Nano-layering at the Adhesive Interface. J Dent Res 2012;91:376-81.
  • Mitra SB, Lee CY, Bui HT, Tantbirojn D, Rusin RP. Long-term adhesion and mechanism of bonding of a paste-liquid resin-modified glass-ionomer. Dent Lin A, Mcintyre NS, Davidson RD. Studies on the Adhesion of Glass-Ionomer Cements to Dentin. J Dent Res 1992;71(11):1836-41.
  • Mena-Serrano A, Kose C, De Paula EA, et al. A New Universal Simplified Adhesive: 6-Month Clinical Evaluation. J Esthet Rest Dent 2013;25:55
  • Munoz MA, Luque I, Hass V, et al. Immediate bonding properties of universal adhesives to dentine. J Dent 2013;41:404-11.
  • Hanabusa M, Mine A, Kuboki T, et al. Bonding effectiveness of a new 'multi-mode' adhesive to enamel and dentine. J Dent 2012;40:475-84.
  • Niu W, Eto JN, Kimura Y, Takeda FH, Matsumoto K. A study on microleakage after resin filling of Class V cavities prepared by Er:YAG laser. J Clin Laser Med Surg 1998;16:227-31.
  • Goncalves M, Corona SA, Borsatto MC, Silva PC, Pecora JD. Tensile bond strength of dentinresinous system interfaces conditioned with Er:YAG laser irradiation. J Clin Laser Med Surg 2002;20:89-93.
  • Visuri SR, Gilbert JL, Wright DD, Wigdor HA, Walsh JT, Jr. Shear strength of composite bonded to Er:YAG laser-prepared dentin. J Dent Res 1996;75:599-605.
  • Ceballo L, Toledano M, Osorio R, Tay FR, Marshall GW. Bonding to Er-YAG-laser-treated dentin. J Dent Res 2002;81:119-22.
  • Sassi JF, Chimello DT, Borsatto MC, et al. Comparative study of the dentin/adhesive systems interface after treatment with Er : YAG laser and acid etching using scanning electron microscope. Lasers Surg Med 2004;34:385-90.
  • Cardoso MV, Coutinho E, Ermis RB, et al. Influence of Er,Cr:YSGG laser treatment on the microtensile bond strength of adhesives to dentin. J Adhes Dent 2008;10:25-33.
  • Gurgan S, Kiremitci A, Cakir FY, et al. Shear bond strength of composite bonded to erbium:yttriumaluminum-garnet laser-prepared dentin. Lasers Med Sci 2009;24:117-22.
  • Chou JC, Chen CC, Ding SJ. Effect of Er,Cr:YSGG laser parameters on shear bond strength and microstructure of dentine. Photomed Laser Surg 2009;27:481-6.
  • Lin S, Caputo AA, Eversole LR, Rizoiu I. Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosthet Dent 1999;82:451 Yazışma Adresi: Yrd.Doç.Dr.Çağatay Barutcigil, Akdeniz Üniversitesi Diş Hekimliği Fakültesi
  • Restoratif Diş Tedavisi Anabilim Dalı 07058/Antalya - Türkiye Tel: 905334286233 Faks: 902423106967
  • Email: cbarutcigil@akdeniz.edu.tr

Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının

Yıl 2013, Cilt: 23 Sayı: 3, 324 - 330, 01.03.2013

Yrd.doç.dr. Çağatay Barutcigil Yrd.doç.dr. Duygu Kürklü Arş.gör.dt. Kubilay Barutcigil Yrd.doç.dr. Hakan Arslan

Öz

Amaç: Bu çalışmanın amacı yeni üniversal bağlayıcı ajanın, self-etch ve etch-and-rinse modlarında kullanımının ve dentin üzerine Erbiyum, kromyum: ytriyum skandiyum galyum garnet (Er,Cr:YSGG) lazer uygulamasının makaslama bağlanma dayanımına etkilerini incelemektir. Gereç ve Yöntem: 60 adet sağlam üçüncü büyük azıdişi seçilmiş ve okluzal mineleri uzaklaştırılmıştır. Dişler yüzey işlemine göre altı gruba ayrılmıştır; Grup A: Kontrol (Self-etch modu), Grup B: %35 fosforik asit ile yüzeyin dağlanması (Etch-and-rinse modu), Grup C: 1,25W Er,Cr:YSGG lazer uygulaması, Grup D: 1,5W Er,Cr:YSGG lazer uygulaması, Grup E: 2W Er,Cr:YSGG lazer uygulaması, son olarak Grup F: 3W Er,Cr:YSGG lazer uygulaması. Yüzey işlemlerinin ardından dentin yüzeylerine üniversal bağlayıcı ajan (3M Single Bond Universal, 3M ESPE St.Paul, MN, ABD - SBU) uygulanmış ve üzerine kompozit (Z250 3M ESPE St.Paul, MN, ABD) yapılmasından sonra makaslama bağlanma dayanımı testi yapılmıştır. Veriler tek yönlü varyans analizi ve Tukey HSD çoklu karşılaştırma testi ile değerlendirilmiştir. p<0.05 istatistiksel anlamlılık seviyesi olarak belirlenmiştir. Bulgular: Fosforik asit uygulanmasının SBU ile dentin arasındaki bağlanma dayanımı önemli derecede arttırdığı bulunmuştur. (p<0.05). Ancak, Er,Cr:YSGG lazer uygulamasının hangi güç seçeneğinde olursa olsun SBU'nun dentine bağlanma dayanımını değerlerini azalttığı belirlenmiştir. Sonuç: Bu yeni universal adezivin etch-and-rinse olarak kullanılmasının dentine bağlanma dayanımını arttırdığı, Er,Cr:YSGG lazerin ise yüzey işlemleri arasında bir alternatif olamayacağı gösterilmiştir.

Anahtar Kelimeler

Kayma mukavemeti YSGG Lazerleri Dentin Bağlayıcı ajan

Kaynakça

  • Van Meerbeek B, De Munck J, Yoshida Y, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003;28:215-35.
  • Peumans M, Kanumilli P, De Munck J, et al. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Reis A, Pellizzaro A, Dal-Bianco K, et al. Impact of adhesive application to wet and dry dentin on long-term resin-dentin bond strengths. Oper Dent 2007;32:380-7.
  • Dal-Bianco K, Pellizzaro A, Patzlaft R, et al. Effects of moisture degree and rubbing action on the immediate resin-dentin bond strength. Dent Mater 2006;22:1150-6.
  • Spencer P, Swafford JR. Unprotected protein at the dentin-adhesive interface. Quintessence Int 1999;30:501-7.
  • Pioch T, Staehle HJ, Wurst M, Duschner H, Dorfer C. The nanoleakage phenomenon: influence of moist vs dry bonding. J Adhes Dent 2002;4:23-30.
  • Sano H. Microtensile testing, nanoleakage, and biodegradation of resin-dentin bonds. J Dent Res 2006;85:11-4.
  • Breschi L, Mazzoni A, Ruggeri A, et al. Dental adhesion review: aging and stability of the bonded interface. Dent Mater 2008;24:90-101.
  • Hashimoto M, Ohno H, Kaga M, et al. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 2000;79:1385-91.
  • Peumans M, De Munck J, Van Landuyt KL, et al. Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching. Dent Mater 2010;26:1176-84.
  • Erickson RL, Barkmeier WW, Latta MA. The role of etching in bonding to enamel: A comparison of self-etching and etch-and-rinse adhesive systems. Dent Mater 2009;25:1459-67.
  • Hanabusa M, Mine A, Kuboki T, et al. Bonding effectiveness of a new 'multi-mode' adhesive to enamel and dentine. J Dent 2012;40:475-84.
  • Perdigao J, Sezinando A, Monteiro PC. Laboratory bonding ability of a multi-purpose dentin adhesive. Am J Dent 2012;25:153-8.
  • Lee BS, Lin PY, Chen MH, et al. Tensile bond strength of Er,Cr:YSGG laser-irradiated human dentin and analysis of dentin-resin interface. Dent Mater 2007;23:570-8.
  • Karaarslan EŞ, Yıldırım C, Üşümez A. Restoratif tedavide lazer uygulamaları. Atatürk Üniv Diş Hek Fak Derg 2012;22:340-9.
  • Chimello-Sousa DT, de Souza AE, Chinelatti MA, et al. Influence of Er : YAG laser irradiation distance on the bond strength of a restorative system to enamel. J Dent 2006;34:245-51.
  • Hossain M, Nakamura Y, Tamaki Y, et al. Atomic analysis and knoop hardness measurement of the cavity floor prepared by Er,Cr:YSGG laser irradiation in vitro. J Oral Rehabil 2003;30:515-21. Chenard T, Amodeo M, Caputo AA, Rizoiu I. Composite resin bond strength to primary dentin prepared with Er,Cr : YSGG laser. J Dent Res 2003;82:B333-B33.
  • Uysal D, Güler Ç. Diş Hekimliğinde lazer: Bir literatür derlemesi. Atatürk Üniv Diş Hek Fak Derg 2012; Suppl 6:44-53.
  • Hossain M, Nakamura Y, Yamada Y, et al. Analysis of surface roughness of enamel and dentin after Er,Cr:YSGG laser irradiation. J Clin Laser Med Surg 2001;19:297-303.
  • De Munck J, Van Meerbeek B, Yudhira R, Lambrechts P, Vanherle G. Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin. Eur J Oral Sci 2002;110:322-9.
  • Bertrand MF, Semez G, Leforestier E, et al. Er : YAG laser cavity preparation and composite resin bonding with a single-component adhesive system: Relationship between shear bond strength and microleakage. Lasers Surg Med 2006;38:615-23.
  • De Munck J, Van Landuyt K, Peumans M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 2005;84:118-32.
  • Moll K, Fritzenschaft A, Haller B. In vitro comparison of dentin bonding systems: effect of testing method and operator. Quintessence Int 2004;35:845-52.
  • Swift EJ, Jr., Perdigao J, Heymann HO. Bonding to enamel and dentin: a brief history and state of the art, 1995. Quintessence Int 1995;26:95-110.
  • Erickson RL, Barkmeier WW, Latta MA. The role of etching in bonding to enamel: a comparison of self-etching and etch-and-rinse adhesive systems. Dent Mater 2009;25:1459-67.
  • Yoshida Y, Yoshihara K, Nagaoka N, et al. Selfassembled Nano-layering at the Adhesive Interface. J Dent Res 2012;91:376-81.
  • Mitra SB, Lee CY, Bui HT, Tantbirojn D, Rusin RP. Long-term adhesion and mechanism of bonding of a paste-liquid resin-modified glass-ionomer. Dent Lin A, Mcintyre NS, Davidson RD. Studies on the Adhesion of Glass-Ionomer Cements to Dentin. J Dent Res 1992;71(11):1836-41.
  • Mena-Serrano A, Kose C, De Paula EA, et al. A New Universal Simplified Adhesive: 6-Month Clinical Evaluation. J Esthet Rest Dent 2013;25:55
  • Munoz MA, Luque I, Hass V, et al. Immediate bonding properties of universal adhesives to dentine. J Dent 2013;41:404-11.
  • Hanabusa M, Mine A, Kuboki T, et al. Bonding effectiveness of a new 'multi-mode' adhesive to enamel and dentine. J Dent 2012;40:475-84.
  • Niu W, Eto JN, Kimura Y, Takeda FH, Matsumoto K. A study on microleakage after resin filling of Class V cavities prepared by Er:YAG laser. J Clin Laser Med Surg 1998;16:227-31.
  • Goncalves M, Corona SA, Borsatto MC, Silva PC, Pecora JD. Tensile bond strength of dentinresinous system interfaces conditioned with Er:YAG laser irradiation. J Clin Laser Med Surg 2002;20:89-93.
  • Visuri SR, Gilbert JL, Wright DD, Wigdor HA, Walsh JT, Jr. Shear strength of composite bonded to Er:YAG laser-prepared dentin. J Dent Res 1996;75:599-605.
  • Ceballo L, Toledano M, Osorio R, Tay FR, Marshall GW. Bonding to Er-YAG-laser-treated dentin. J Dent Res 2002;81:119-22.
  • Sassi JF, Chimello DT, Borsatto MC, et al. Comparative study of the dentin/adhesive systems interface after treatment with Er : YAG laser and acid etching using scanning electron microscope. Lasers Surg Med 2004;34:385-90.
  • Cardoso MV, Coutinho E, Ermis RB, et al. Influence of Er,Cr:YSGG laser treatment on the microtensile bond strength of adhesives to dentin. J Adhes Dent 2008;10:25-33.
  • Gurgan S, Kiremitci A, Cakir FY, et al. Shear bond strength of composite bonded to erbium:yttriumaluminum-garnet laser-prepared dentin. Lasers Med Sci 2009;24:117-22.
  • Chou JC, Chen CC, Ding SJ. Effect of Er,Cr:YSGG laser parameters on shear bond strength and microstructure of dentine. Photomed Laser Surg 2009;27:481-6.
  • Lin S, Caputo AA, Eversole LR, Rizoiu I. Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosthet Dent 1999;82:451 Yazışma Adresi: Yrd.Doç.Dr.Çağatay Barutcigil, Akdeniz Üniversitesi Diş Hekimliği Fakültesi
  • Restoratif Diş Tedavisi Anabilim Dalı 07058/Antalya - Türkiye Tel: 905334286233 Faks: 902423106967
  • Email: cbarutcigil@akdeniz.edu.tr
Toplam 40 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Bölüm Makaleler
Yazarlar

Yrd.doç.dr. Çağatay Barutcigil Bu kişi benim

Yrd.doç.dr. Duygu Kürklü Bu kişi benim

Arş.gör.dt. Kubilay Barutcigil Bu kişi benim

Yrd.doç.dr. Hakan Arslan Bu kişi benim

Yayımlanma Tarihi 1 Mart 2013
Yayımlandığı Sayı Yıl 2013 Cilt: 23 Sayı: 3

Kaynak Göster

APA Barutcigil, Y. Ç., Kürklü, Y. D., Barutcigil, A. K., Arslan, Y. H. (2013). Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 23(3), 324-330.
AMA Barutcigil YÇ, Kürklü YD, Barutcigil AK, Arslan YH. Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının. Ata Diş Hek Fak Derg. Mart 2013;23(3):324-330.
Chicago Barutcigil, Yrd.doç.dr. Çağatay, Yrd.doç.dr. Duygu Kürklü, Arş.gör.dt. Kubilay Barutcigil, ve Yrd.doç.dr. Hakan Arslan. “Farklı yüzey işlemleri uygulanmış Dentine üniversal bağlayıcı ajanın bağlanma dayanımının”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 23, sy. 3 (Mart 2013): 324-30.
EndNote Barutcigil YÇ, Kürklü YD, Barutcigil AK, Arslan YH (01 Mart 2013) Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 23 3 324–330.
IEEE Y. Ç. Barutcigil, Y. D. Kürklü, A. K. Barutcigil, ve Y. H. Arslan, “Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının”, Ata Diş Hek Fak Derg, c. 23, sy. 3, ss. 324–330, 2013.
ISNAD Barutcigil, Yrd.doç.dr. Çağatay vd. “Farklı yüzey işlemleri uygulanmış Dentine üniversal bağlayıcı ajanın bağlanma dayanımının”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 23/3 (Mart 2013), 324-330.
JAMA Barutcigil YÇ, Kürklü YD, Barutcigil AK, Arslan YH. Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının. Ata Diş Hek Fak Derg. 2013;23:324–330.
MLA Barutcigil, Yrd.doç.dr. Çağatay vd. “Farklı yüzey işlemleri uygulanmış Dentine üniversal bağlayıcı ajanın bağlanma dayanımının”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, c. 23, sy. 3, 2013, ss. 324-30.
Vancouver Barutcigil YÇ, Kürklü YD, Barutcigil AK, Arslan YH. Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının. Ata Diş Hek Fak Derg. 2013;23(3):324-30.

Bu eser Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır. Tıklayınız.