Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]
Öz
*The authors regret there was an error in the author line related to a forgotten author and the corrected author Line is provided below.
Saadettin Murat ONAT1,*, Rafaat M. Hussein2
1Bartın Üniversitesi, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümü, 74100, BARTIN
2SUNY, College of Environmental Science and Forestry, Syracuse, USA.
*There was an error in the letters in the Acknowledgements and the corrected author Line is provided below.
Acknowledgments
This paper is prepared from the Master’s thesis submitted to SUNY- ESF, Syracuse USA in 1999.
These changes would not affect the results and conclusion of the whole manuscript. The authors would like to apologize for any inconvenience caused.
Anahtar Kelimeler
Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi 2016 18 (1): 1 - 12]
Destekleyen Kurum
This paper is prepared from the Master’s thesis submitted to SUNY- ESF, Syracuse USA in 1999.
Kaynakça
- All references and citations can be found in the published Version in : Please look at the details to the given address below: Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]
Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]
Öz
*The authors regret there was an error in the author line related to a forgotten author and the corrected author Line is provided below.
Saadettin Murat ONAT1,*, Rafaat M. Hussein2
1Bartın Üniversitesi, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümü, 74100, BARTIN
2SUNY, College of Environmental Science and Forestry, Syracuse, USA.
*There was an error in the letters in the Acknowledgements and the corrected author Line is provided below.
Acknowledgments
This paper is prepared from the Master’s thesis submitted to SUNY- ESF, Syracuse USA in 1999.
These changes would not affect the results and conclusion of the whole manuscript. The authors would like to apologize for any inconvenience caused.
Anahtar Kelimeler
Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi 2016 18 (1): 1 - 12]
Kaynakça
- All references and citations can be found in the published Version in : Please look at the details to the given address below: Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Kereste, Hamur ve Kağıt |
| Bölüm | Corrections, Errata and Corrigenda |
| Yazarlar | |
| Yayımlanma Tarihi | 15 Aralık 2021 |
| Yayımlandığı Sayı | Yıl 2021 |
Kaynak Göster
Bartin Orman Fakultesi Dergisi Editorship,
Bartin University, Faculty of Forestry, Dean Floor No:106, Agdaci District, 74100 Bartin-Turkey.
Tel: +90 (378) 223 5094, Fax: +90 (378) 223 5062,
E-mail: bofdergi@gmail.com