Araştırma Makalesi
BibTex RIS Kaynak Göster
Yıl 2020, Cilt: 4 Sayı: 1, 43 - 47, 31.03.2020
https://doi.org/10.30516/bilgesci.692307

Öz

Kaynakça

  • Axelsson S. Å. 1998. The mechanization of logging operations in Sweden and its effect on occupational safety and health. International Journal of Forest Engineering 9:25–31.
  • Bergstrand K. 1991 - Planning and analysis of forestry operation studies, Skogsarbeten, Bulletin, 17: 63p.
  • Halilović1V., et. al. 2017 - Analysis of time consumption during sessile oak felling and processing works applying the full-length method. Works of the Faculty of Forestry University of Sarajevo. No. 2 (19-35).
  • Hippoliti G., Piegai F. 2000 – Tecniche e sistemi di lavoro per la raccolta del legno.
  • Hofmann A. 1991 – Il faggio e le faggete in Italia.
  • Kortoçi Y., Kellezi M. 2014- International Journal of Ecosystems and Ecology Sciences (IJEES) Vol. 4 (1): 89-92.
  • Kotro M., Koci P. e Haxhi A., 1996 - Extension of the road network in our mountain forests areas; ecological, technical and social aspects. Proceedings of the seminar on environmentally sound forest roads and wood transport. Sinaia, Romania.
  • Mousavi R., Naghdi R. 2014 - Comparison of productivity and cost of timber extraction by farm tractor, skidding vs. forwarding in northern Iran, HortFlora Research Spectrum, 3(3): 201-210.
  • Ole-Meiludie, R. E. L. & Fue, G. E. - 1990. Working conditions in natural forests. Tanzania Forest Record 43: 93–96.

Comparison of time consumption and productivity during beech forest felling and processing in two different working conditions.

Yıl 2020, Cilt: 4 Sayı: 1, 43 - 47, 31.03.2020
https://doi.org/10.30516/bilgesci.692307

Öz

This study was carried out in two countries Italy and Albania. The aim of this research were to compare the time consumption during felling and sorting works in this two countries considering the working conditions. The study was conducted in two utilization sites, one in each country, Monte Amiata site in Italy and Dardhe Xhyre in Albania. Field observation was used to determine the working conditions in each site. In Monte Amiata site was noticed that delay woking time is 40.13%, but this is lower comparing to Dardhe Xhyre of 57.6%. Most of this time in both countries is unavoidable delay time respectively of 21.35% in Monte Amiata site and 36.93% in Dardhe Xhyre. Average productivity per gross hour in Monte Amiata is 3,480 m3 /h /team while in Dardhe Xhyre is 3,610 m3 /h /team. Working conditions in Albania are inferior compared with Italy especially accessibility and transport to the working place.

Kaynakça

  • Axelsson S. Å. 1998. The mechanization of logging operations in Sweden and its effect on occupational safety and health. International Journal of Forest Engineering 9:25–31.
  • Bergstrand K. 1991 - Planning and analysis of forestry operation studies, Skogsarbeten, Bulletin, 17: 63p.
  • Halilović1V., et. al. 2017 - Analysis of time consumption during sessile oak felling and processing works applying the full-length method. Works of the Faculty of Forestry University of Sarajevo. No. 2 (19-35).
  • Hippoliti G., Piegai F. 2000 – Tecniche e sistemi di lavoro per la raccolta del legno.
  • Hofmann A. 1991 – Il faggio e le faggete in Italia.
  • Kortoçi Y., Kellezi M. 2014- International Journal of Ecosystems and Ecology Sciences (IJEES) Vol. 4 (1): 89-92.
  • Kotro M., Koci P. e Haxhi A., 1996 - Extension of the road network in our mountain forests areas; ecological, technical and social aspects. Proceedings of the seminar on environmentally sound forest roads and wood transport. Sinaia, Romania.
  • Mousavi R., Naghdi R. 2014 - Comparison of productivity and cost of timber extraction by farm tractor, skidding vs. forwarding in northern Iran, HortFlora Research Spectrum, 3(3): 201-210.
  • Ole-Meiludie, R. E. L. & Fue, G. E. - 1990. Working conditions in natural forests. Tanzania Forest Record 43: 93–96.
Toplam 9 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Orman Endüstri Mühendisliği
Bölüm Araştırma Makaleleri
Yazarlar

Ylli Kortoci 0000-0001-8779-4410

Mirvjena Kellezi 0000-0001-8429-5376

Yayımlanma Tarihi 31 Mart 2020
Kabul Tarihi 25 Mart 2020
Yayımlandığı Sayı Yıl 2020 Cilt: 4 Sayı: 1

Kaynak Göster

APA Kortoci, Y., & Kellezi, M. (2020). Comparison of time consumption and productivity during beech forest felling and processing in two different working conditions. Bilge International Journal of Science and Technology Research, 4(1), 43-47. https://doi.org/10.30516/bilgesci.692307