Evaluation of the Performance of ANN Algorithms with the Bidirectional Functionally Graded Circular Plate Problem
Öz
Functionally graded materials (FGMs) are materials composed of metals and ceramics in which the distribution of material components varies according to a particular volumetric function. FGMs are often used in high-temperature applications. In our study, models were created in the Artificial Neural Network depending on the equivalent stress levels in the compositional gradient exponent, which is the most important parameter in determining the thermo-mechanical behavior of circular plates functionally staggered in two directions, and the performances of these models were evaluated. These models were obtained with four different training algorithms: Levenberg-Marquardt, Backpropagation Algorithm, Resilient Propagation Algorithm, Conjugate Gradient Backpropagation with Powell-Beale Restarts To train the ANN, equivalent stress levels were obtained by performing numerical analyzes at different compositional gradient upper values. The data sets were created by considering the largest value of the equivalent stress levels, the smallest value of the largest value, the largest value of the smallest value, and the smallest value of the smallest value. In this study, training stages and performance values were examined and interpreted with 4 training algorithms in detail.
Anahtar Kelimeler
“Two-Directional Functionally Graded Circular Plates, Finite Difference Method, Thermal Stress Analysis, Artificial Neural Network, Training Algorithms”
Kaynakça
- [1] Kakac S., Pramuanjaroenkij A., Zhou X.Y., “A review of numerical modeling of solid oxide fuel cells,” International Journal of Hydrogen Energy, 32(7).761-786, 2007, doi.org/10.1016/j.ijhydene.2006.11.028
- [2] Ruys A., Popov E., Sun D., Russell J., Murray C., “Functionally graded electrical/thermal ceramic systems,” Journal of the European Ceramic Society, 21(10-11). 2025-2029, 2001, doi.org/10.1016/S0955-2219(01)00165-0
- [3] Koizumi M., Niino M., “Overview of FGM research in Japan”, MRS Bulletin, 20(1).19-21, 1995.
- [4] Cho J.R., Ha D.Y., “Optimal tailoring of 2D volume-fraction distributions for heat-resisting functionally graded materials using FDM.” Computer Methods in Applied Mechanics and Engineering. 191 (29-30). 3195-3211, 2002. doi: 10.1557/S0883769400048867
- [5] Nemat-Alla M., “Reduction of thermal stresses by developing two-dimensional functionally graded materials,” International Journal of Solids and Structures, 40(26). 7339-7356, 2003. doi: 10.1016/j.ijsolstr.2003.08.017
- [6] Ootao Y., Tanigawa Y., Nakamura T., “Optimization of material composition of FGM hollow circular cylinder under thermal loading a neural network approach.” Composites Part B: Engineering. 30(4). 415-422 1999. doi: 10.1016/S1359-8368(99)00003- 7
- [7] Khoshnoodi H.,Yas M.H.,Samadinejad A., “Dynamic Analysis of Multi-Drectional Functionally Graded Panels and Comparetive Modeling by ANN.” Journal of Solid Mechabics, 8(3).482-494, 2016. Retrieved from http://jsm.iauarak.ac.ir/article_524265.html
- [8] Xu.Y., You.T., “Minimizing thermal residual stresses in ceramic matrix composites by using Iterative MapReduce guided particle swarm optimization algorithm.” Composite Structures. 99. 388-396. 2013. doi: 10.1016/j.compstruct.2012.11.027
- [9] Singh A.K., Siddhartha, Hussain S., “Wear peculiarity of TiO2 filled polyester-based Homogeneous composites and their Functionally Graded Materials using Taguchi methodology and ANN.” Materials Today: Proceedings. 2. 2718 – 2727, 2015. doi: 10.1016/j.matpr.2015.07.239
- [10] Ghatage P.S.,Kar V.R., P., Sudhagara E., “On the numerical modelling and analysis of multi-directional functionally graded composite structures: A review’’,Composite Structures , .236 ,111837, 2020. doi.org/10.1016/j.compstruct.2019.111837