Investigating Transient Responses of IEEE 6 Bus Power System to Various Fault Types using PowerWorld Simulator

Öz

The transient analysis of power systems is essential for understanding the dynamic responses and stability under fault conditions. This paper focuses on the transient analysis of the IEEE 6 bus power system using the PowerWorld Simulator, with the primary objective of investigating the system’s behavior under various fault conditions, including three-phase balanced faults, line-to-ground faults, line-to-line faults, and double line-to-ground faults. The IEEE 6 bus system, a standardized benchmark for testing power system algorithms, provides a simplified yet effective model for examining transient phenomena. Utilizing the Power World Simulator, this study models and simulates the fault conditions to assess their impacts on key parameters such as bus voltages, generator rotor angles, and generator voltages. By conducting a series of simulations, we aim to provide a detailed characterization of the transient response of the IEEE 6 bus system under each fault scenario. The results of our analysis reveal distinct patterns of system behavior for each type of fault. Three-phase balanced faults, being the most severe, significantly disrupt the stability of the system, causing considerable deviations in voltage and phase angles. Line-to-ground faults, although less severe, still pose substantial challenges, especially in terms of voltage stability at the faulted bus. Line-to-line faults primarily affect the phase voltages, leading to asymmetrical disturbances that propagate through the network. Double line-to-ground faults, which combine characteristics of line-to-line and line-to-ground faults, exhibit complex transient dynamics that test the system’s resilience and control mechanisms. Our findings underscore the necessity for robust protective measures and control strategies to mitigate the adverse effects of these faults. The study highlights the importance of fault location, fault type, and system configuration in determining the overall stability and reliability of the power system.

Anahtar Kelimeler

• Fault analysis
• IEEE 6 bus system
• PowerWorld simulator
• transient stability

Kaynakça

1. [1] P. Bhatt and S. Kumar, “Comprehensive assessment of fault current contribution in smart distribution grid with solar photovoltaic,” Technology and Economics of Smart Grids and Sustainable Energy, vol. 2, no. 1, 2017. https://doi.org/10.1007/s40866-017-0023-8
2. [2] M. Begum, M. Alam, and K. Muttaqi, “Analytical expressions for characterising voltage dips and phase‐angle jumps in electricity networks,” IET Generation, Transmission & Distribution, vol. 13, no. 1, p. 116-126, 2018. https://doi.org/10.1049/iet-gtd.2018.6348
3. [3] R. Salim, K. Salim, and A. Bretãs, “Further improvements on impedance-based fault location for power distribution systems,” IET Generation, Transmission & Distribution, vol. 5, no. 4, p. 467, 2011. https://doi.org/10.1049/iet-gtd.2010.0446
4. [4] D. Zhang, “An alternative approach to analyze un-symmetrical faults in power systems,” TENCON 2009 - 2009 IEEE Region 10 Conference, Singapore, 2009, pp. 1-6. https://doi.org/10.1109/tencon.2009.5396193
5. [5] Y. Altınok, M. Lüy, N. A. Metin, S. Görgülü Balcı, and F. Acar, “Sustainable grids: Smart meter solutions for efficient energy measurement,” International Scientific and Vocational Studies Journal, vol. 8, no. 1, pp. 49–64, 2024. https://doi.org/10.47897/bilmes.1485662
6. [6] K. Mets, J. A. Ojea, and C. Develder, “Combining power and communication network simulation for cost-effective smart grid analysis,” IEEE Communications Surveys & Tutorials, vol. 16, no. 3, pp. 1771–1796, 2014. https://doi.org/10.1109/surv.2014.021414.00116
7. [7] A. Çifci̇, “Use of PowerWorld simulator in learning power flow analysis: A computer-aided visualization tool,” The Journal of Graduate School of Natural and Applied Sciences of Mehmet Akif Ersoy University, vol. 13, no. 2, pp. 281–291, Dec. 2022. https://doi.org/10.29048/makufebed.1153316
8. [8] A. Jain, A. Mani, and A. S. Siddiqui, “Simulation of a microgrid with OpenDSS an open-source software package,” Lecture Notes in Electrical Engineering, pp. 513–529, Jan. 2023. https://doi.org/10.1007/978-981-19-6383-4_42

9. [9] C. Zuo, B. Wang, M. Zhang, M. A. Khanwala, and S. Dang, “Power flow analysis using PowerWorld: A comprehensive testing report,” in 2015 International Conference on Fluid Power and Mechatronics (FPM), 2015.
10. [10] H. Huang, Z. Mao, M. R. Narimani, and K. R. Davis, “Toward efficient wide-area identification of multiple element contingencies in power systems,” in 2021 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT), 2021.
11. [11] H. Wen, “Power flow analysis of 110kV power supply system based on PowerWorld,” Journal of Physics. Conference Series, vol. 2495, no. 1, p. 012025, May 2023. https://doi.org/10.1088/1742-6596/2495/1/012025
12. [12] X. Li, C. Liu, P. Guo, S. Liu, and J. Ning, “Deep learning-based transient stability assessment framework for large-scale modern power system,” International Journal of Electrical Power & Energy Systems, vol. 139, p. 108010, Jul. 2022. https://doi.org/10.1016/j.ijepes.2022.108010
13. [13] R. Kaur and D. Kumar, “Transient stability improvement of IEEE 9 bus system using power world simulator,” MATEC Web of Conferences, vol. 57, p. 01026, 2016. https://doi.org/10.1051/matecconf/20165701026
14. [14] M. Mahasathyavathi, R. Balasubramani, and L. Jeeva, “Load frequency control for multi-area power system using PWS,” International Journal of Research in Advent Technology, vol. 7, no. 4, p. 212-219, 2019. https://doi.org/10.32622/ijrat.732019187
15. [15] S. Kim and T. Overbye, “Optimal subinterval selection approach for power system transient stability simulation,” Energies, vol. 8, no. 10, p. 11871-11882, 2015. https://doi.org/10.3390/en81011871
16. [16] P. Demetriou, M. Asprou, J. Quirós-Tortós, and E. Kyriakides, “Dynamic IEEE test systems for transient analysis,” IEEE Systems Journal, vol. 11, no. 4, p. 2108-2117, 2017. https://doi.org/10.1109/jsyst.2015.2444893
17. [17] A. Anuar, M. A. A. Wahab, S. N. M. Arshad, M. I. F. Romli, A. H. A. Bakar, and M. A. A. Bakar, “Transient stability for IEEE 14 bus power system using power world simulator,” J. Phys. Conf. Ser., vol. 1432, no. 1, p. 012009, 2020. https://doi.org/10.1088/1742-6596/1432/1/012009
18. [18] N. Anwar, A. H. Hanif, H. F. Khan, and M. F. Ullah, “Transient stability analysis of the IEEE-9 bus system under multiple contingencies,” Eng. Technol. Appl. Sci. Res., vol. 10, no. 4, pp. 5925–5932, 2020. https://doi.org/10.48084/etasr.3273
19. [19] K. Patel, “Transient stability analysis and tuning of power system stabilizer for three machine nine bus system using frequency response approach,” in 2020 International Conference on Advances in Computing and Communication Engineering (ICACCE), 2020.
20. [20] G. M. Tina, G. Maione, S. Licciardello, and D. Stefanelli, “Comparative technical-economical analysis of transient stability improvements in a power system,” Appl. Sci. (Basel), vol. 11, no. 23, p. 11359, 2021. https://doi.org/10.3390/app112311359
21. [21] P. V. Rajesh Varma, M. K. Kar, and A. K. Singh, “Transient analysis of a standard IEEE-9 bus power system using power world simulator,” in Advances in Smart Grid Automation and Industry 4.0, Singapore: Springer Singapore, 2021, pp. 233–243. https://doi.org/10.1007/978-981-15-7675-1_22
22. [22] G. M. Tina, G. Maione, and S. Licciardello, “Evaluation of technical solutions to improve transient stability in power systems with wind power generation,” Energies, vol. 15, no. 19, p. 7055, 2022. https://doi.org/10.3390/en15197055
23. [23] N. A. Salim, H. Mohamed, M. E. S. Bin Ensnat, and Z. M. Yasin, “System transient stability due to various contingency using power world simulator,” in 2023 IEEE 3rd International Conference in Power Engineering Applications (ICPEA), 2023.
24. [24] H. Saadat, Power System Analysis, 3rd ed., Alexandria: PSA Publishing LLC, 2010.