Design of Electrical Test Device for Automotive Industry

Öz

In this study, a test device has been developed that can be used to test various vehicle cables and cable harnesses in the automotive sector. The test device can perform basic measurements such as conductivity, short circuit, voltage, resistance, capacity, and specific measurements such as diodes and active relays among the number of test points varying between 128-1024. It performs the programmed tests step by step by processing the Test Source Code (*.tkk) files prepared with the designed Interface Program, loaded from the SD memory card in the device. The tester system consists of a selection of test source codes to be run and a general-purpose USB barcode reader, a general-purpose barcode printer, external LED units, an Optional External Unit (OHB) that offer a larger screen and various features if desired, and monitor. The OHB unit can be a Raspberry PI based mini-computer that can be mounted inside or outside the device, or any Windows based computer or Industrial computer can be used if desired. The test device realized has been operated stably with all its functions and has been successfully tested.

Anahtar Kelimeler

• Functional Testing
• Capasitor Measurement
• STM32
• Harness Tester

Kaynakça

1. [1] Trommnau, J., Kühnle, J., Siegert, J., Inderka, R. and Bauernhansl, T., (2019), Overview of the state of the art in the production process of automotive wire harnesses, current research and future trends,” Procedia CIRP, 81, 387–392.
2. [2] Villanueva-Rey, P., Belo, S., Quinteiro, P., Arroja, L. and Dias, A. C., (2018), Wiring in the automobile industry: Life cycle assessment of an innovative cable solution, J. Clean. Prod., 204, 237–246.
3. [3] Bi Z. et al., (2018), Automation of Electrical Cable Harnesses Testing, Robotics, 7, 1, 1.
4. [4] Webb, D. P., Jaggernauth, W. A., Cottrill, M. C. W., Palmer, P. J., West, A. A. and Conway, P. P., (2010), Design and construction of large-area flexible printed-circuit automotive electrical interconnection harnesses, Proc. Inst. Mech. Eng. Part D J. Automob. Eng., 224, 6, 785–797.
5. [5] Kakkeri, R. B., Inamdar, L., Bhambare, S. and Gund, A., (2017), Distributed Cable Harness Tester, International Research Journal of Engineering and Technology (IRJET), (04)05 May, e-ISSN:23-0056.
6. [6] Jiang, S., Luo, G. and Cheng, Y., (2010), Design and development of wiring harness test based on S3C44B0. COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, (29) 2, 362-369. doi:10.1108/03321641011014832
7. [7] Madhe, S. P., Upadhye, V. M. and Joshi, A. K., (2020), Design of Low Cost IOT Enabled Universal Wiring Harness Tester. Journal of Critical Reviews, 7 (18), 1476-1481. doi:10.31838/jcr.07.18.190
8. [8] Gong M. and Dong Y., (2011), A distributed cable harness tester based on CAN bus, Electric Information and Control Engineering (ICEICE). doi:10.1109/ICEICE.2011.5777720

9. [9] Hayrettin, K., (2015), Automated continuity testing of flexible backplanes using a cable tester, 269-272. 10.1109/AUTEST.2015.7356501.