Araştırma Makalesi

The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms

Cilt: 7 Sayı: 3 19 Ocak 2024
PDF İndir
EN TR

The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms

Öz

Objective: This research was carried out with the aim of minimizing psychosocial symptoms such as fear, anxiety and crying by hospitalized children undergoing inhaler treatment with a nebulizer developed with three-dimensional printing technology, and to examine the effect of this method on parental satisfaction. Methods: The study is of experimental design. 44 children between the ages 2-7 receiving inhaler therapy with a nebulizer and their parents were recruited into the experimental and control groups. The researchers collected the data with “Scale for Identifying Psychosocial Symptoms in Hospitalized Children” and the “PedsQL Healthcare Satisfaction Scale.” Results: In the experimental group, 81.8 percent of the children being treated with a three-dimensional printing therapeutic device who had previously received treatment in the same way were not fearful, while 27.3 percent of those being treated with a standard type of nebulizer in the control group were unafraid (X2=24.246; p<0.001). While those who were not crying at the time of their therapy made up 71.9% in the experimental group (X2=28,686; p<0.001). The t-test performed to compare the pre- and posttests in the experimental group revealed a significant difference of p=0.002. Conclusions: It was concluded that inhaler therapy administered with a therapeutic nebulizer designed with three-dimensional printing technology reduced psychosocial symptoms and positively impacted parental satisfaction. This study highlights that was carried out with the aim of minimizing psychosocial symptoms by hospitalized children undergoing inhaler treatment with a nebulizer developed with three-dimensional printing technology.

Anahtar Kelimeler

Destekleyen Kurum

Yoktur.

Proje Numarası

Yoktur.

Etik Beyan

HERHANGİ BİR ETİK ÇIKAR ÇATIŞMASI YOKTUR.

Teşekkür

Yazarlar tüm katılımcılara teşekkür eder.

Kaynakça

  1. Ibfelt T, Engelund EH, Schultz AC, Andersen LP. Effect of cleaning and disinfection of toys on infectious diseases and micro-organisms in daycare nurseries. J Hosp Infect 2015; 89(2): 109-115.
  2. Kurtuncu M, Arslan M, Yaylacı B, Eyupoğlu N. Sağlıkta gelişen teknoloji: üç boyutlu yazıcılar. Int J 3D Printing Technol Digital Indust 2018; 2(2): 99-110.
  3. Svendsen EJ, Bjork IT. Experienced nurses' use of non-pharmacological approaches comprise more than relief from pain. J Pediatr Nurs 2014; 29(4): 19-28.
  4. Chen HJ, Hsu Y, Hu YF, Chung YY. Therapeutic play promoting children health management-preschool children aerosol therapy completion rates. IJRMBS 2014; 1(1): 88-92.
  5. Potasz C, Varela MJVD, Carvalho LCD, Prado LFD, Prado GFD. Effect of play activities on hospitalized children's stress: a randomized clinical trial. Scand J Occup Ther 2013; 20(1): 71-79.
  6. Alhaider SA, Alshehri HA, Al-Eid K. Replacing nebulizers by MDI-spacers for bronchodilator and inhaled corticosteroid administration: Impact on the utilization of hospital resourcesInt J Pediatr Adolesc Med 2014; 1(1): 26-30.
  7. Capurso M, Pazzagli C. Play as a coping strategy?: A review of the relevant literature. Child Health Care 2016; 45(1): 39-66.
  8. Lulgjuraj D, Maneval RE. Unaccompanied Hospitalized Children: An Integrative Review. J Pediatr Nurs 2020; 56: 38-46.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Ağrı, Klinik Tıp Bilimleri (Diğer)

Bölüm

Araştırma Makalesi

Erken Görünüm Tarihi

18 Ocak 2024

Yayımlanma Tarihi

19 Ocak 2024

Gönderilme Tarihi

13 Eylül 2023

Kabul Tarihi

28 Aralık 2023

Yayımlandığı Sayı

Yıl 2023 Cilt: 7 Sayı: 3

Kaynak Göster

APA
Arslan, N., & Kürtüncü, M. (2024). The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms. Balıkesir Medical Journal, 7(3), 74-94. https://doi.org/10.33716/bmedj.1359832
AMA
1.Arslan N, Kürtüncü M. The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms. BMedJ. 2024;7(3):74-94. doi:10.33716/bmedj.1359832
Chicago
Arslan, Nurten, ve Meltem Kürtüncü. 2024. “The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms”. Balıkesir Medical Journal 7 (3): 74-94. https://doi.org/10.33716/bmedj.1359832.
EndNote
Arslan N, Kürtüncü M (01 Ocak 2024) The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms. Balıkesir Medical Journal 7 3 74–94.
IEEE
[1]N. Arslan ve M. Kürtüncü, “The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms”, BMedJ, c. 7, sy 3, ss. 74–94, Oca. 2024, doi: 10.33716/bmedj.1359832.
ISNAD
Arslan, Nurten - Kürtüncü, Meltem. “The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms”. Balıkesir Medical Journal 7/3 (01 Ocak 2024): 74-94. https://doi.org/10.33716/bmedj.1359832.
JAMA
1.Arslan N, Kürtüncü M. The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms. BMedJ. 2024;7:74–94.
MLA
Arslan, Nurten, ve Meltem Kürtüncü. “The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms”. Balıkesir Medical Journal, c. 7, sy 3, Ocak 2024, ss. 74-94, doi:10.33716/bmedj.1359832.
Vancouver
1.Nurten Arslan, Meltem Kürtüncü. The Effect of Inhaler Treatment with a Therapeutic Nebulizer Designed with 3D Printing Technology on Children’s Psychosocial Symptoms. BMedJ. 01 Ocak 2024;7(3):74-9. doi:10.33716/bmedj.1359832