Akrilonitril-Bütadien-Stiren Terpolimerine Çinko Borat ve Kırmızı Fosfor Sinerjik Etkisi Sayesinde Yanmaya Karşı Dayanım Kazandırılması

Öz

Akrilonitril-bütadien-stiren (ABS), iyi mekanik özellikleri ve işlenebilirliği nedeniyle yaygın olarak kullanılan bir mühendislik termoplastiği olmakla birlikte, zayıf alev dayanımı ve yanma sırasında damlama eğilimi göstermesi önemli bir dezavantaj oluşturmaktadır. Bu çalışmada, ABS kopolimerine kırmızı fosfor (RP) ve çinko borat (2ZnO.3B2O5.3,5H2O-ZnB) ilavesiyle elde edilen kompozitlerin mekanik, ısıl ve alev geciktirici özellikleri incelenmiştir. Kompozitler, kapsüllenmiş RP ve ZnB kullanılarak eriyik karıştırma yöntemiyle hazırlanmış ve enjeksiyon kalıplama/sıcak pres teknikleriyle şekillendirilmiştir. Numuneler; Dikey UL-94, Limitleyici Oksijen İndeksi (LOI), konik kalorimetre, erime akış indeksi (MFI), termogravimetrik analiz (TGA) ve mekanik testler ile karakterize edilmiştir. RP ve ZnB katkıları, saf ABS’ye kıyasla mekanik özelliklerde sınırlı düşüşe neden olmuş; ancak değerler uygulamalar için kabul edilebilir düzeyde kalmıştır. ZnB ilavesinin, RP içeren kompozitlerde çekme dayanımını nispeten artırdığı gözlemlenmiştir. TGA sonuçları, katkılı kompozitlerin ileri bozunma aşamalarında daha yüksek ısıl kararlılık ve artmış kalıntı miktarı sergilediğini göstermiştir. Alev dayanımı testlerinde, saf ABS’nin 19,5 olan LOI değeri 23–24 aralığına yükselmiş ve %30 RP içeriğine sahip kompozit UL-94 V-0 sınıfına ulaşmıştır. En düşük tepe ısı salınım hızı (152,8 kW/m²) ve toplam ısı salınımı (36,0 MJ/m²) değerleri ABS/RP25 ZnB5 kompozitinde elde edilmiştir. Sonuç olarak, ZnB ve RP kombinasyonunun ABS için etkili ve sinerjik bir hibrit alev geciktirici sistem sunduğu belirlenmiştir.

Anahtar Kelimeler

• ABS
• Çinko borat
• Kırmızı fosfor
• Alev geciktirme
• Isısal bozunma

Destekleyen Kurum

TÜBİTAK BİDEB

Proje Numarası

11398412410130

Etik Beyan

Bu çalışma, TÜBİTAK BİDEB 2209-B Üniversite Öğrencileri Sanayiye Yönelik Araştırma Projeleri Destekleme Programı 2024 yılı 1. Dönem çağrısı kapsamında 11398412410130 proje numarası ile desteklenmiştir

Contribution of Flame Resistance to Acrylonitrile-Butadiene-Styrene Terpolymer via the Synergistic Effect of Zinc Borate and Red Phosphorus

Öz

Acrylonitrile-butadiene-styrene (ABS) is a widely used engineering thermoplastic due to its favorable mechanical properties and ease of processing; however, its poor flame retardancy and melt-dripping behavior during combustion significantly limit its applications. In this study, the mechanical, thermal, and flame-retardant properties of ABS composites containing red phosphorus (RP) and zinc borate (2ZnO.3B2O5.3,5H2O-ZnB) were systematically investigated. The composites were prepared via melt blending using encapsulated RP and ZnB, followed by injection molding and hot pressing. Flame retardancy and material performance were evaluated using the UL-94 vertical burning test, limiting oxygen index (LOI), cone calorimetry, melt flow index (MFI), thermogravimetric analysis (TGA), and mechanical tests. The incorporation of RP and ZnB resulted in moderate reductions in tensile strength, elongation at break, and impact resistance compared to neat ABS; however, all values remained within acceptable ranges for engineering applications. ZnB addition provided relatively higher tensile strength in RPcontaining composites. TGA results revealed that although the composites exhibited earlier degradation onset, they showed enhanced thermal stability at advanced degradation stages and increased char yield, reaching 9.9% for the ABS/25RP-5ZnB composite. Flame retardancy was significantly improved, with the LOI value increasing from 19.5 for neat ABS to 23-24 for the composites, and the formulation containing 30 wt% RP achieving a UL-94 V-0 rating. The lowest peak heat release rate (152.8 kW/m²) and total heat release (36.0 MJ/m²) were obtained for the ABS/RP25 ZnB5 composite. As a result, the combination of ZnB and RP exhibits a synergistic effect, providing an efficient hybrid flame-retardant system for enhancing the thermal stability and fire performance of ABS.

Anahtar Kelimeler

• ABS
• Red phosphorus
• Zinc borate
• Flame retardant
• Thermal degradation

Destekleyen Kurum

TÜBİTAK BİDEB

Proje Numarası

11398412410130

Etik Beyan

This study was supported under the TÜBİTAK BİDEB 2209-B University Students Industry-Oriented Research Projects Support Program, 2024, 1st term call, with project number 11398412410130.

Kaynakça

1. Wu, N., & Li, X. (2014). Flame retardancy and synergistic flame retardant mechanisms of acrylonitrile-butadiene-styrene composites based on aluminum hypophosphite. Polymer Degradation and Stability, 105, 265-276. https://doi.org/10.1016/j.polymdegradstab.2014.04.011.
2. Polli, H., Pontes, L., Araujo, A., Barros, J., & Fernandes, V. (2009). Degradation behavior and kinetic study of ABS polymer. Journal of Thermal Analysis and Calorimetry, 95(1), 131-134. https://doi.org/10.1007/s10973-006-7781-1.
3. Jian, R. K., Chen, L., Chen, S. Y., Long, J. W., & Wang, Y. Z. (2014). A novel flame-retardant acrylonitrile-butadiene-styrene system based on aluminum isobutylphosphinate and red phosphorus: Flame retardance, thermal degradation and pyrolysis behavior. Polymer Degradation and Stability, 109, 184-193. https://doi.org/10.1016/j.polymdegradstab.2014.07.018.
4. Cirmad, H., Tirkes, S., & Tayfun, U. (2022). Evaluation of flammability, thermal stability and mechanical behavior of expandable graphite-reinforced acrylonitrile-butadiene-styrene terpolymer. Journal of Thermal Analysis and Calorimetry, 147(3), 2229-2237. https://doi.org/10.1007/s10973-021-10656-y.
5. Chen, J., Rong, L., Fang, W., Liu, J., & Liu, X. (2022). Highly efficient intumescent flame retardant coating for ABS: Preparation and application. Journal of Applied Polymer Science, 139(13), 51860. https://doi.org/10.1002/app.51860.
6. Yin, H., Q., Yuan, D. D., & Cai, X. F. (2013). Red phosphorus acts as second acid source to form a novel intumescent-contractive flame-retardant system on ABS. Journal of Thermal Analysis and Calorimetry, 111(1), 499-506. https://doi.org/10.1007/s10973-012-2536-7.
7. Visakh, P. M., & Yoshihiko, A. (2015). Flame retardants: Polymer blends, composites and nanocomposites. Chapter 2 Flame Retardancy of Polymer Nanocomposite, Springer. https://doi.org/10.1007/978-3-319-03467-6_2.
8. Dogan, M., Dogan, S. D., Savas, L. A., Ozcelik, G., & Tayfun, U. (2021). Flame retardant effect of boron compounds in polymeric materials. Composites Part B: Engineering, 222, 109088. https://doi.org/10.1016/j.compositesb.2021.109088.

9. Hou, S., Li, Z., Zhang, Y. J., & Jiang, P. (2021). Phosphorous-phosphorous synergistic effect on flame retardancy, mechanically reinforce and hydrolytic resistance for PC/ABS blends. Polymer Degradation and Stability, 183, 109442. https://doi.org/10.1016/j.polymdegradstab.2020.109442.
10. Koca, A. İ., Üreyen, M. E., Yüksel, G., & Karaer, F. (2019). Effects of carbon nanotube-phosphorus based flame retardant combinations on flammability of polypropylene. International Periodical of Recent Technologies in Applied Engineering, 1(1), 19-24.
11. Tayfun, Ü., Yılmaz, V. M., & Arslan, Ç. (2023). Eklemeli imalat yönteminde filament olarak kullanılan polimerik malzemeler. Akıllı Sistemler Dergisi, 2(1), 45-67.
12. Savas, L. A., Deniz, T. K., Tayfun, U., & Dogan, M. (2017). Effect of microcapsulated red phosphorus on flame retardant, thermal and mechanical properties of thermoplastic polyurethane composites filled with huntite&hydromagnesite mineral. Polymer Degradation and Stability, 135, 121-129. https://doi.org/10.1016/j.polymdegradstab.2016.12.001
13. Mu, J. J., Zhou, R., Liu, C., & Su, T. (2021). Synergistic effect of intumescent flame retardant and zinc borate on linear low-density polyethylene. Polymer Engineering & Science, 61(11), 2820-2830. https://doi.org/10.1002/pen.25802.
14. Altuntas, E., Narlioglu, N., & Alma, M. H. (2017). Investigation of the fire, thermal, and mechanical properties of zinc borate and synergic fire retardants on composites produced with PP-MDF wastes. BioResources, 12(4), 6971-6983. https://doi.org/10.15376/biores.12.4.6971-6983.
15. Erdem, A., & Doğan, M. (2023). Influence of boron bearing fillers on flame retardancy properties of huntite hydromagnesite filled ductile PLA biocomposites. Journal of Boron, 8(1), 16-24. https://doi.org/10.30728/boron.1135702.
16. Yan, L., Xu, Z., & Wang, X. (2019). Synergistic flame-retardant and smoke suppression effects of zinc borate in transparent intumescent fire-retardant coatings applied on wood substrates. Journal of Thermal Analysis and Calorimetry, 136(4), 1563-1574. https://doi.org/10.1007/s10973-018-7819-01.
17. Dike, A. S., Tayfun, U., & Dogan, M. (2017). Influence of zinc borate on flame retardant and thermal properties of polyurethane elastomer composites containing huntite-hydromagnesite mineral. Fire and Materials, 41(7), 890-897. https://doi.org/10.1002/fam.2428.
18. Bee, S. T., Sin, L. T., Ch’ng, B. S., Ratnam, C. T., & Rahmat, A. R. (2018). Electron beam irradiation of zinc borate flame retardant containing acrylonite-butadiene-styrene (ABS) composites. Journal of Polymer Research, 25(4), 89. https://doi.org/10.1007/s10965-018-1485-7.
19. Xiong, L., Huang, S., Zhong, R., Tang, W., Liu, C., & Jin, Y. (2022). Preparation, characterization, and performance of lignin-based microencapsulated red phosphorus flame retardant for ABS. Journal of Wuhan University of Technology, 37(2), 292-299. https://doi.org/10.1007/s11595-022-2530-2.
20. Riahipour, R., Nemati, M. S., Zadehmohamad, M., Abadyan, M. R., Tehrani, M., & Baniassadi, M. (2022). Mechanical properties of an epoxy-based coating reinforced with silica aerogel and ammonium polyphosphate additives. Polymers and Polymer Composites, 30, 09673911211069019. https://doi.org/10.1177/09673911211069019.
21. Yildiz, C., Seki, Y., Kizilkan, E., Sarikanat, M., & Altay, L. (2023). Development of halogen-free flame retardant acrylonitrile butadiene styrene (ABS) based composite materials. Chemistryselect, 8(41), e202300989. https://doi.org/10.1002/slct.202300989.
22. Balart, R., Garcia-Sanoguera, D., Quiles-Carrillo, L., Montanes, N., & Torres-Giner, S. (2019). Kinetic analysis of the thermal degradation of recycled acrylonitrile-butadiene-styrene by non-isothermal thermogravimetry. Polymers, 11(2), 281. https://doi.org/10.3390/polym11020281.
23. Zhou, F., Tang, W., Xi, W., Qian, L., Wang, J., Qiu, Y., & Chen, Y. (2024). Improving the fracture toughness, flame retardancy and smoke suppression of ABS by core-shell elastic flame retardant particles with P/Si synergistic effect. Polymer Degradation and Stability, 228, 110893. https://doi.org/10.1016/j.polymdegradstab.2024.110893.
24. Prieur, B., Meub, M., Wittemann, M., Klein, R., Bellayer, S., Fontaine, G., & Bourbigot, S. (2016). Phosphorylation of lignin to flame retard acrylonitrile butadiene styrene (ABS). Polymer Degradation and Stability, 127, 32-43. https://doi.org/10.1016/j.polymdegradstab.2016.01.015.
25. Chen, X., Sun, T., & Cai, X. (2014). The investigation of intumescent flame-retarded ABS using zinc borate as synergist. Journal of Thermal Analysis and Calorimetry, 115(1), 185-191. https://doi.org/10.1007/s10973-013-3302-1.
26. Alonso, A., Lazaro, M., Lazaro, D., & Alvear, D. (2023). Thermal characterization of acrylonitrile butadiene styrene-ABS obtained with different manufacturing processes. Journal of Thermal Analysis and Calorimetry, 148(20), 10557-10572. https://doi.org/10.1007/s10973-023-12258-2.
27. Levchik, S. (2021). Phosphorus-based flame retardants. Non-Halogenated Flame Retardant Handbook, 23-99. https://doi.org/10.1002/9781119752240.ch2.
28. İpek, Y. (2021). Influence of particle size, additive ratio and chemical structure of zinc borate on thermal and mechanical properties of polyvinyl chloride. Journal of Boron, 6(4), 387-394. https://doi.org/10.30728/boron.961843.
29. Savas L. A., Tayfun, U., Hancer, M., & Dogan, M. (2019). The flame-retardant effect of calcium hypophosphite in various thermoplastic polymers. Fire and Materials, 43(3), 294-302. https://doi.org/10.1002/fam.2700.
30. Aydın, D. Y., Gürü, M., Ayar, B., & Çakanyıldırım, Ç. (2016). Bor bileşiklerinin alev geciktirici ve yüksek sıcaklığa dayanıklı pigment olarak uygulanabilirliği. Journal of Boron, 1(1), 33-39.
31. Wu, N., Xiu, Z., & Du, J. (2017). Preparation of microencapsulated aluminum hypophosphite and flame retardancy and mechanical properties of flame-retardant ABS composites. Journal of Applied Polymer Science, 134(33), 45008. https://doi.org/10.1002/app.45008.
32. Ahmed, S. A., Tirkes, S., & Tayfun, U. (2020). Reinforcing effect of polyurethane sizing on properties of acrylonitrile-butadiene-styrene composites involving short carbon fiber. SN Applied Sciences, 2(12), 2024. https://doi.org/10.1007/s42452-020-03809-5.
33. Liu, G., Liao, Y., & Ma, X. (2017). Thermal behavior of vehicle plastic blends contained acrylonitrile-butadiene-styrene (ABS) in pyrolysis using TGFTIR. Waste Management, 61, 315-326. https://doi.org/10.1016/j.wasman.2017.01.034.
34. Yi, J., Liu, Y., & Cai, X. (2013). The synergistic effect of adjuvant on the intumescent flame-retardant ABS with a novel charring agent. Journal of Thermal Analysis and Calorimetry, 113(2), 753-761. https://doi.org/10.1007/s10973-012-2802-8.
35. Łopiński, J., Schmidt, B., Bai, Y., & Kowalczyk, K. (2020). Effect of the B: Zn: H2O molar ratio on the properties of poly (vinyl acetate) and zinc borate-based intumescent coating materials exposed to a quasi-real cellulosic fire. Polymers, 12(11), 2542. https://doi.org/10.3390/polym12112542.
36. Wang, Y., Qu, Y., Wang, C., & Dou, J. (2025). Enhanced flame retardancy of silica fume-based geopolymer composite coatings through in situ-formed boron phosphate from doped zinc phytate and boric acid. Minerals, 15(7), 735. https://doi.org/10.3390/min15070735.
37. Wang, X., Li, L., Tong, Y., Dai, Y., & Chen, W. (2021). Synthesis of core/shell structured zinc borate/silica and its surface charring for enhanced flame retardant properties. Polymer Degradation and Stability, 183, 109432. https://doi.org/10.1016/j.polymdegradstab.2020.109432.
38. Cao, X., Yang, Y., Luo, H., & Cai, X. (2017). High efficiency intumescent flame retardancy between Hexakis (4-nitrophenoxy) cyclotriphosphazene and ammonium polyphosphate on ABS. Polymer Degradation and Stability, 143, 259-265. https://doi.org/10.1016/j.polymdegradstab.2017.07.022.
39. Levchik, S. V., & Weil, E. D. (2006). A review of recent progress in phosphorus-based flame retardants. Journal of Fire Sciences, 24(5), 345-364. https://doi.org/10.1177/0734904106068426.
40. Peng, H. Q., Zhou, Q., Wang, D. Y., Chen, L., & Wang, Y. Z. (2008). A novel charring agent containing caged bicyclic phosphate and its application in intumescent flame retardant polypropylene systems. Journal of Industrial and Engineering Chemistry, 14(5), 589-595. https://doi.org/10.1016/j.jiec.2008.05.011.