Effect of Soil Stabilization Using Ground Granulated Blast Furnace Slag and Alkali Activated Solutions on Rigid Pavement Cost

Öz

This paper examines how stabilizing road subgrade soils with ground granulated blast furnace slag (GGBFS) and alkali-activated solution (AAS) influences both rigid pavement layer thicknesses and initial investment expenditures. For this investigation, bentonite (BT) samples representing the subgrade soil were blended with GGBFS and AAS solutions formulated with 8 molar sodium hydroxide at weight percentages of 5%, 10%, 15%, and 20%. Proctor and unconfined compressive strength (UCS) trials were carried out on the prepared formulations. Following a 28-day curing stage, the maximum compressive strength performance was observed in the 10% GGBFS+AAS blends. California Bearing Ratio (CBR) assessments conducted on the control soil versus the optimum 10% GGBFS+AAS mixture indicated an 11.80 fold enhancement in the CBR performance of the modified soil. Based on structural designs and economic evaluations performed in compliance with AASHTO 1993 guidelines, the results demonstrate that ground stabilization using 10% GGBFS+AAS optimizes concrete pavement layer configurations, yielding a 1.42% reduction in initial construction costs.

Anahtar Kelimeler

• Alkali activated solution
• Bentonite
• Ground granulated blast furnace slag
• Rigid pavement design
• Soil stabilization

Etik Beyan

Ethics committee approval was not required for this study because of there was no study on animals or humans.

Kaynakça

1. Abdulkarim, I. I., & Sa’eed, Y. U. (2020). Performance evaluation of the effect of sodium hydroxide on geotechnical properties of lateritic soil for rural road construction. FUOYE Journal of Engineering and Technology, 5(2), 213–216.
2. Abdila, S. R., Abdullah, M. M. A. B., Ahmad, M., Azmi, N. J., & Jaya, R. P. (2022). Potential of soil stabilization using ground granulated blast furnace slag (GGBFS) and fly ash via geopolymerization method: A review. Materials, 15(1), 375.
3. American Association of State Highway and Transportation Officials (AASHTO). (1993). Guide for design of pavement structures (Interim). AASHTO.
4. American Association of State Highway and Transportation Officials (AASHTO). (2024). Mechanistic–empirical pavement design guide (3rd ed., MEPDG-3). AASHTO.
5. Arulrajah, A., Mohammadinia, A., Horpibulsuk, S., & Samingthong, W. (2016). Influence of class F fly ash and curing temperature on strength development of fly ash-recycled concrete aggregate blends. Construction and Building Materials, 127, 743.
6. ASTM International. (2006). Standard test method for specific gravity of soils (ASTM D854).
7. ASTM International. (2006). Standard test method for unconfined compressive strength of cohesive soil (ASTM D2166-06).
8. ASTM International. (2014). Standard test methods for laboratory compaction characteristics of soil using standard effort (ASTM D698).

9. ASTM International. (2017a). Standard test methods for liquid limit, plastic limit, and plasticity index of soils (ASTM D4318).
10. ASTM International. (2017b). Standard test methods for particle-size distribution (gradation) of soils using sieve analysis (ASTM D6913).
11. ASTM International. (2021). Standard test method for California Bearing Ratio (CBR) of laboratory-compacted soils (ASTM D1883-21).
12. Babatunde, O. A., Sani, E. J., & Sambo, A. H. (2019). Black cotton soil stabilization using glass powder. International Journal of Innovative Research in Science, Engineering and Technology, 8(5).
13. Bharti, G., Hurukadli, P., & Shukla, B. K. (2023). Environmental impact analysis and utilization of copper slag for stabilising black cotton soil. Materials Today: Proceedings, 2023(3).
14. Bilici, H., Okur, D. V., Türköz, M., & Savaş, H. (2020). Effect of fly ash and blast furnace slag additives on the strength of clay soil and comparative analysis (in Turkish). Bitlis Eren University Journal of Science and Technology, 9(2), 910–919.
15. Çınar, M. (2024). Investigation of geotechnical properties of clayey sand soil stabilized with aerated concrete waste after Kahramanmaraş earthquake (in Turkish). Dicle University Journal of Engineering, 15(1), 269–275. https://doi.org/10.24012/dumf.1404478
16. Geçkil, T., & Karabaş, B. (2026). Evaluating the effects of carbon black from recycled tires on subgrade stabilization, pavement design, and construction-phase CO₂ emissions. Indian Journal of Engineering and Materials Sciences (IJEMS), 33(01), 111–125.
17. Geçkil, T., Sarıca, T., & Karabaş, B. (2021). Effects of black carbon stabilized soil on rigid pavement thickness and cost (in Turkish). ECJSE, 8(3), 1372–1384. https://doi.org/10.31202/ecjse.894046
18. Geçkil, T., Sarıca, T., & Karabaş, B. (2024). Investigation of the effects of soil improvement with metakaolin on rigid pavement thickness and cost. Black Sea Journal of Engineering and Science, 7(5), 11–12.
19. Geçkil, T., Sarıca, T., & Karabaş, B. (2025a). Investigation of the effect of sandy soil stabilized with ground pumice stone on flexible pavement design (in Turkish). International Journal of Pure and Applied Sciences, 11(1), 176–192.
20. Geçkil, T., Sarıca, T., & Karabaş, B. (2025b). Investigation of layer thickness and cost of flexible pavement designed on soil improved using glass powder (in Turkish). Journal of Innovative Engineering and Natural Sciences, 5(1), 80–98. https://doi.org/10.61112/jiens.1509488
21. Geçkil, T., Sarıca, T. & Karabaş, B., (2025c). Investigation of freeze-thaw resistance of road substrates stabilized with metakaolin. Osmaniye Korkut Ata University Journal of the Institute of Science and Technology. https://doi.org/10.47495/okufbed.1548511
22. Geçkil, T., Sarıca, T., & Karabaş, B. (2026). Investigation of the effect of stabilizing subgrade soils with recycled glass powder on freeze–thaw resistance. Gümüşhane University Journal of Science and Technology, 1(1), 179–196. https://doi.org/10.17714/gumusfenbil.1802171
23. Hamed, E., & Demiroz, A. (2024). Optimization of geotechnical characteristics of clayey soils using fly ash and granulated blast furnace slag-based geopolymer. Construction and Building Materials, 441, Article 137488.
24. Hu, J., Zhang, X., Wang, Y., & Liu, L. (2025). Machine learning-based optimization of geopolymer-stabilized soil formulation using blast furnace slag and fly ash. Materials Today Communications, Article 113500.
25. Hussain, S. (2019). Stabilization of expansive soil using sodium hydroxide [Master's thesis, Near East University]. Near East University Repository.
26. Karabaş, B. (2025). Effects and sustainability of road subgrade soils stabilized with various additives on highway pavement (Publication No. 960734) [Doctoral dissertation, İnönü University]. National Thesis Center.
27. Karabaş, B., & Uzer, A. U. (2026). Effect of ground granulated blast furnace slag–stabilized bentonite soils on flexible pavement design and cost analysis. Al-Qadisiyah Journal for Engineering Sciences, 19(2), 001–008. https://doi.org/10.30772/qjes.2026.169263.1896
28. Kök, B. V. (2019). Highway engineering and design (in Turkish). Nobel Academic Publishing.
29. Konai, S., Mayur, M., Dutta, S., & Hinge, G. (2026). Sustainable soil stabilization using alkali-activated rice husk ash. Journal of Hazardous, Toxic, and Radioactive Waste, 30(1), Article 04025041.
30. Orhan, M. (2013). Soil mechanics laboratory tests (in Turkish). Gazi Publishing.
31. Republic of Türkiye Ministry of Environment, Urbanization and Climate Change. (2026, January 28). Unit prices. https://yfk.csb.gov.tr/birim-fiyatlar-i-100468
32. Sarıca, T. (2019). Evaluation of the usability of construction and demolition wastes reinforced with pozzolan as granular fill (in Turkish) [Master's thesis, Inonu University]. Graduate School of Natural and Applied Sciences.
33. Sarıca, T., Geçkil, T., Ok, B., & Aksoy, H. S. (2025). An investigation of the usability of alkali-activated blast furnace slag-additive construction demolition waste as filling material. Materials, 18(2), Article 398. https://doi.org/10.3390/ma18020398
34. Sas, W., Dzięcioł, J., Radzevičius, A., Radziemska, M., Dapkienė, M., Šadzevičius, R., & Głuchowski, A. (2021). Geotechnical and environmental assessment of blast furnace slag for engineering applications. Materials, 14(20), Article 6029.
35. Shabana, S., Anshi, C., Shamseera, P., Shyamili, T. M., Sruthi, V., & Suhaira, P. (2014). Study on CBR values of soil with crushed coconut shells. International Journal of Advanced Engineering and Technology, 5(3), 55–58.
36. Shakil, M., Nazar, S., Ameen, H. F. M., Shahzad, A., & Ahmad, F. (2025). A comparative study of ground granulated blast furnace slag and bagasse ash incorporation on enhancing mechanical properties of expansive soil. Results in Engineering, 25, Article 103569.
37. Soğancı, A. S., Yenginar, Y., & Orman, A. (2023). Geotechnical properties of clayey soils stabilized with marble dust and granulated blast furnace slag. KSCE Journal of Civil Engineering, 27(11), 4622–4634.
38. Şengül, T., Akray, N., & Vitoşoğlu, Y. (2023). Investigating the effects of stabilization carried out using fly ash and polypropylene fiber on the properties of highway clay soils. Construction and Building Materials, 400, Article 132590. https://doi.org/10.1016/j.conbuildmat.2023.132590
39. T.C. Ministry of Transport KGM Technical Research Department. (2019). Highway concrete pavement design guide (in Turkish). KGM Technical Research Department.
40. Tanyıldızı, M. M. (2020). Effects of clayey soil stabilized with blast furnace slag on highway flexible pavement layer thicknesses and cost (in Turkish). Firat University Journal of Engineering Sciences, 32(2), 509–520. https://doi.org/10.35234/fumbd.738512
41. Tanyıldızı, M. M., & Karabaş, B. (2026). Zayıf zeminlerde YFC ve çelik lifli beton yolların ilk yapım maliyeti ve CO₂ emisyonuna etkisi. Black Sea Journal of Engineering and Science, 9(2), 516–548.
42. Topçuoğlu, Y. A., & Güroçak, Z. (2023). Determination of optimum basalt fiber ratio for maximum strength in soil reinforcement (in Turkish). Dicle University Journal of Engineering, 14(3), 479–487.
43. Tunç, A. (2002). Geotechnics and applications in road engineering (in Turkish). Nobel Publishing.
44. Uzer, A. U., Tunç, U., Acar, M. C., & Çelik, A. I. (2025). Sustainable stabilization of clay soils using fly ash and blast furnace slag-based geopolymers: Comprehensive experimental evaluation and artificial neural network modelling. Structural Engineering and Mechanics, 96(1), 13–33.
45. Uzuner, B. A. (2016). Introduction to foundation engineering (in Turkish). Derya Publishing.
46. Venkatesh, N., Mallikarjuna, R. G., Reddy, S. K., & Chavali, R. V. P. (2021). Strength and durability characteristics of GGBS geopolymer stabilized black cotton soil. Materials Today: Proceedings, 43, 2373–2376.
47. Yıldıran, E. S. (2019). Investigation of the effects of various additives on road subgrade soil (in Turkish) [Master's thesis, Inonu University]. Graduate School of Natural and Applied Sciences.
48. Yılmaz, I., Yıldıran, M., & Keskin, I. (2017). Soil mechanics laboratory tests and solved problems (in Turkish). Seçkin Publishing.